Cause : Low Battery Power
If your Xbox One Wireless Controller is not turning on, the controller might need to be charged. Plug the controller into the Xbox console using a USB cord. To check the controllers battery level, press the Xbox button, and navigate to the home screen. The controllers charge should be displayed in the bottom right corner of the home screen. Allow the controller to charge until the controllers charge level is full .
If your Xbox One Wireless Controller is losing battery power very quickly, the controllers batteries may be faulty. If the batteries will not charge or lose charge very quickly, replace the batteries using the Xbox One Elite Wireless Controller Series 1 Battery Replacement Guide.
Solution 6 General Issues
Alternatively, there are a few other things that can cause this issue:
- The controller went out of range of the phone. Re-sync them together and things should be fine.
- One or more wireless/Bluetooth devices connected to your Android phone can mess up all the connections. Remove all of them and leave only the controller.
- Your controller is out of juice. Try to change the batteries or recharge it to see if that changes things.
- Make sure that you dont have wireless/Bluetooth interference close to you. Other nearby devices can cause this problem.
Hope that one of our solutions helped you get back on track and now you can play your favourite titles with the Xbox controller on your Android device.
If you have any other workarounds or questions, feel free to leave them in the comments section below and well be sure to take a look.
Fix 3 Use A Different Usb Cable
If you are using a USB cable controller that is not computable with your PC, you may encounter the PC not detecting Xbox One controller problem. As you know, there are various USB cables and some of them may be designed only for charging and transferring data.
So, it is very likely that this problem can be resolved simply by using a different USB cable.
Don’t Miss: How To Find Someones Ip Adress On Xbox
If Your Controller Isnt Connecting Check For Interference
If youve exhausted every other option such as checking for dead batteries and youre still having trouble connecting your Xbox One controllers, its time to troubleshoot other possibilities. One of the most common contenders for this is interference in your play area, whether from other electronics, walls, or something unexpected, like radio or microwave interference.
The first step is to check that youre close enough to your Xbox One. This matters because your controller can only reach between 19 and 28 feet away. If you try to play from a much longer distance, you are more likely to have problems with your connection.
After that, make sure to note any barriers that might be blocking your controllers connection. Some of these obstacles might include walls, furniture, or even additional accessories you have plugged into your Xbox One. You should try to remove as many barriers as possible because having things in the way can worsen your signal.
Make sure you remove any metal items from your controller and console. Items like these can damage your signal. The last tip to remember: Turn your console off and on again for a clean slate. If you try all of this and youre still having connectivity problems, you should take a look at Microsofts support website for more tips or consider purchasing a new controller.
We hope this guide was helpful and that youre ready to check out all the best Xbox One games available.
Editors’ Recommendations
Try These Fixes Before You Throw That Controller Out
Wireless Xbox One controllers are great, but experiencing a disconnect in the middle of a game sucks all the fun right out of the room. The good news is that most of the problems that can cause an Xbox One controller to not connect, or cause a connection to fail, are pretty easy to fix. And even in a worst-case scenario, you can always turn your wireless controller into a wired controller with a micro USB cable.
When an Xbox One controller won’t connect, it usually manifests in one of the following ways:
- Ring light flashes on the controller and never goes steady.
- You are unable to control games or menus with the controller.
- The please reconnect the controller message appears on your television.
These problems may occur when you first turn on your controller, or while you’re playing.
Don’t Miss: How To Enable Cross Platform Fortnite Xbox
Update Your Controllers Firmware
If youre having connectivity problems, it may be that your controllers internal software is out of date. You can update that firmware from your Xbox One console, which can solve some issues. Head to the Settings menu and the Kinect and Devices menu, where youll find each of your connected controllers, either with a wireless connection or connected by a USB port. From this menu, select the controller you want to update and choose the Ellipses beneath the Controller button. From here, youll get a menu that allows you to check for firmware updates, which could fix any issues youre dealing with.
How Do I Fix My Xbox One Controller From Moving So Fast
Since 2018. users have complained about Xbox controllers scrolling too quickly through menus and jumping around the screen. Users have proposed several answers to the Fast Scroll issue.
Pressing RB + a face button has solved the Fast Scroll bug for some issues, though others say it didnt help.
Some have resolved the issue by updating the controllers firmware.
Disconnecting and then reconnecting the controller reportedly helps in some cases.
Others say a console reset turned Fast Scroll off.
Problems with the right analog stick can cause scrolling issues. Check for worn pads and sensors and replace the joystick if necessary.
Don’t Miss: How To Delete Profiles Off Xbox 360
If Your Xbox One Controller Is Not Connecting
If you can’t get your Xbox One controller to connect to your console, you should check for a few common issues.
Do you have eight controllers already connected to your console? While you likely don’t use this many, the maximum amount of controllers an Xbox One supports is eight. After this point, you can’t connect any more controllers.
Hold the Xbox button on a controller and choose Turn controller off on the resulting menu to disconnect one or more of them. Then try connecting the new controller again.
Also, remember that you can only pair a controller with one Xbox One system at a time. If you go to a friend’s house and pair your controller with his Xbox, you’ll have to re-pair it with yours again. This also applies when you connect your Xbox One controller to a PC and then try to use it on your console again.
See the “If Your Xbox One Controller Is Blinking” section below for more on this.
Locating The Xbox One Controller In The Device Manager
If the drivers are fully updated, there is one solution that usually feels the most logical. It turns out that not every micro USB cable works for the controller and there is a specific type needed to be used. What causes the issue is the fact that certain micro USB cables only provide power transfer and they would work for Xbox 360. However, the Xbox One controller can only use the data sync cables which provide both power and data transfer. The prime example of this issue is the fact that you cant use the cable from your regular Xbox One controller to connect to your PC since there is no data being transferred.
This can make it difficult for users to find the perfect cable. The cable you want to use should be micro USB, type B, and it should be a data/sync cable so make sure you let the guy in the tech market know what you want. Also, if you must turn on the controller first and then plug in the cable to make it work. Moreover, do not plug into USB 3.0 ports.
You May Like: Do You Need Xbox Live Gold To Play Apex Legends
Ways To Fix Xbox One Controller Wont Connect Error
Its the weekend, and you are about to begin one of your manic gaming session, and out of nowhere, you find that your nifty Xbox One Controller wont connect.
The Xbox logo keeps on flashing, and the connection keeps dropping intermittently. The controller might keep on randomly disconnecting. I know, its frustrating as hell.
You might have tried Microsoft Troubleshooting, and soon realized that it is all but a joke. Well, fret not. Here are a few solutions you can do to get your controller up and working. These are pretty easy to perform. Give one of these a try. If you want to remove your credit card from xbox one, .
Verifying Headset & Controller
Other potential causes that will end up producing this issue are a faulty Headset or a faulty Xbox One controller. Fortunately, there are some easy troubleshooting steps that will let you know if one of your accessories is responsible for the issue.
With this in mind, start by plugging your Headset Adapter into a different device and see if its working. If it is, its very likely that youre dealing with a faulty controller. In case the headset is not working on a different device, its likely that youll need to replace your headset.
If you have a second controller, you can also try to connect your headset to it and see if the headset is still not working.
If these verifications havent pointed out towards a headset or controller fault, move down to the next method below.
Don’t Miss: How To See Coordinates In Minecraft Xbox One
You May Have A Sticking Issue
Spilled drinks, dirty fingers, or dust can all gum up your controller.
Cleaning your Xbox controller regularly with gentle strokes of soft microfiber cloth will help avoid sticking issues.
Pay special attention to the grip zone where you hold the computer.
If your controller is especially dirty, you can spray a small amount of isopropyl alcohol mixed 50:50 with water on your cloth.
Short bursts of compressed air can blow out the dust, fibers, pet hair, and other unwanted grime.
Moisten a cotton swab with isopropyl alcohol and clean all buttons, thumbsticks, D-pads, and triggers.
If the problem persists, you can open the Xbox controller for internal cleaning. Be advised that this will void the warranty and may lead to further damage.
Update Your Controller Software
Another reason why your Xbox One Controller wont connect could be when you are running an out of date software for your controller. To update your controller follow the following steps:
- Connect your controller to the console using a USB cable.
- Sign into your Xbox Live account.
- Go to the settings option upon pressing the Menu Button.
- Choose Devices & Accessories.
Also Check: Can Xbox 360 Play 4k Ultra Hd
Cause : Microphone Is Preventing Connection
Some users have reported that their Xbox One Wireless Controller will not connect with their Xbox console when their headset microphone is plugged in. Unplug your headsets microphone and reconnect the Xbox One Wireless Controller. If the controller does not connect automatically, sync the controller and console, again. Once a connection has been established, plug the microphone back into your headset.
If you are using a Model 1697 controller, your internal headphone jack may be damaged. Try unplugging the microphone and connect the controller, again. If you continue to have problems, try a different pair of headphones that are known to work.
Update Windows And Controller Firmware
Xbox controller support is a built-in feature of Windows. That means when you update Windows youre also updating your Xbox controller software. If your Windows version is up to date and your controller still wont connect, you may need to update the controller as well.
Its possible that your controller has stopped working properly because the internal firmware that runs it is too old to talk to the latest version of Windows. You can rectify this by updating the firmware and making sure everything is brand new. Updating your controller firmware is easy if you also happen to have the console for the controller in question, since it will happen automatically and wirelessly when you connect it to that device.
However, if youre a PC user who doesnt own the right Xbox, you need to make sure that youre running at least Windows 10 Anniversary Edition. Then install the Xbox Accessories app from the Microsoft Store and connect your controller via USB. The app will then prompt you to update your firmware.
Recommended Reading: How To Connect Airpods To Xbox One Controller
Try Another Controller And Another Xbox
As this is a troubleshooting guide, we must recommend one of the most significant steps to nail down where the problem is.
That said, you should try connecting another controller to your Xbox console. Do remember to check its batteries!
If that works fine, your controller might be the issue. Then, try connecting your controller to another Xbox. Youd have to follow the pairing process, though.
However, if another working controller cant connect to your Xbox, then the problem is your system. If this is the problem, then try the following steps.
Xbox One Controller Not Working 4 Tips On How To Fix It
Xbox One controller not working? Learn what to do if your Xbox One controller won’t connect, doesn’t turn on, or keeps blinking.
Is your Xbox One controller not working? This is an annoying problem that a lot of Xbox owners face. While today’s wireless controllers are more convenient than the wired ones of previous systems, they come with their own set of issues.
In this troubleshooting guide, we’ll show you how to fix your Xbox One controller when it won’t connect, sync, or even turn on properly. By the end, you’ll be back to gaming. While we focus on the Xbox One here, most of these tips also apply to the Xbox Series X and Series S since they’re so similar.
You May Like: How Do I Make My Xbox One My Home Xbox
Look For Uninterrupted Power Supply
The first and foremost step is to turn off the power of the wireless controller and turn it on again. You can press and hold the power button for 10 seconds to turn the power off and push it again to turn it back on.
If the controller still fails to connect, Shut down your console at once and turn it on after a while. The light on the controllers Xbox button will indicate whether the controller connects to the console or not.
The Wireless Connection Isn’t Strong Enough
Most of the time, if your controller isn’t connecting to your Xbox One console, it’s due to a networking problem.
Ensure that your controller is positioned within 30 feet of the console, and that there’s nothing blocking the signal.
Also make sure that your Wi-Fi is working correctly a buggy Wi-Fi router can sometimes interfere with other wireless signals in your house.
Recommended Reading: How To Teleport To Coordinates In Minecraft Xbox One
Fix 1 Update Your Xbox One Controller Driver
Perhaps your Xbox One controller is not compatible with your PC or gets corrupted. To make your controller work properly, you can try updating the Xbox One controller driver. Heres how to do that:
Step 1. Press Win + R keys to open the Run box, and then type devmgmt.msc in it and hit Enter to open the Device Manager window.
Step 2. In the pop-up window, expand the Microsoft Xbox One Controller section, and then right-click on it and select Update Driver Software.
Step 3. Then you will be asked how do you want to search for driver software? You can update your Xbox controller automatically or manually according to your needs.
After the update process completes, you can check if the PC not detecting Xbox One controller issue is resolved or not.
Try Connecting Another Controller To Your Xbox
Like most troubleshooting, you can help nail down where the problem lies by trying different devices. Try connecting a different controller, that you know works, to your Xbox system. Confirm that its batteries are charged, too.
If that controller works fine, then the original controller is the issue. But if both have problems, then the problem likely lies with your console instead. You may need to get in touch with Xbox Support in this case.
Recommended Reading: Gta 5 Online Mod Menu Xbox 360
Fix: Xbox One Controller Not Recognizing Headset
Several users are reporting that they cant make their Xbox One controller to recognize the headset. The issue is reported to occur with both wired and wireless headsets when the controller is connected to an Xbox One console or to a PC. In most cases, affected users report that the issue occurs with official Microsoft headsets or 3rd party headsets that are supposed to be compatible with Xbox One controllers.
Try A Different Console
If all these above steps fail, and your Xbox One Controller Wont Connect, try connecting another controller to your console. Play for a couple of minutes to test the second controller.
If the second controller works fine, your original controller is probably faulty, and you perhaps need to replace it. Head over to your Microsoft account, go to Device Support and request a replacement controller.
If the connection error exists on both the controller, the fault may be with your Xbox controller, and you need to service it.
Read Also: How To Enable Cross Platform Fortnite Xbox