Thursday, September 22, 2022

Why Does My Xbox 360 Controller Keep Disconnecting

Don't Miss

Disable Device Association Service

How to Fix Xbox One Controller Disconnecting (Best Tutorial)

The Xbox One Controller disconnecting issue may occur if the Device Association Service is enabled on your PC.

1. Launch the Services app by typing it in the Windows search bar and clicking on Open.

2. Select the Device Association Service in the list and click on the Stop this service option in the left pane as shown highlighted.

Also Read:Fix High Packet Loss on Xbox

Fixing Battery And Power Issues

  • 1Remove the battery packs and batteries. Dead batteries are by far the most common reason a controller turns off. Push the small button on the top of the battery pack to remove it and slide out the batteries.
  • 2Replace the batteries. Use fresh AA batteries, and never mix and match old batteries and new batteries. Advertisement
  • 3Recharge the controller if you are using a reusable battery pack. Most rechargeable battery packs either plug into the Xbox with a USB cable or come with a small charging station. Plug in your battery pack and wait 1-3 hours before trying the controller again.
  • If you are using the cable chargers, make sure you turn your Xbox on first.
  • When attached with the charging cable you may keep playing your Xbox 360.
  • If the pack is charging correctly then the cable or docking station light will glow red. When it turns green the pack is fully charged.
  • 4Use a light to inspect the metal contacts at the bottom of the battery pack. If you still cannot get your controller to stay on, make sure that the metal contacts at the bottom are not dirty or rusted. If they are, you’ll need to clean them or buy a new battery pack.
  • To clean the contacts use several dry cotton swabs to lightly scrub away dirt and dust.XResearch source
  • Taping up your battery pack is usually a temporary solution, and makes it difficult to replace dead batteries.XResearch source
  • Fix : Reconnect Your Controller

    You can also try reconnecting your Xbox One controller to your console. This can rebuild the connection and prevent your Xbox One controller from disconnecting frequently.

    If you are using a wired controller, unplug the cable and then plug it back. If the problem persists, try using another cable or USB port to see if it is resolved.

    If you are using a wireless controller, you can follow the steps below to reconnect your controller.

    1) Hold down the wireless connect button on the controller until the Xbox button on your controller flashes.

    2) Hold down the wireless connect button on the controller until the Xbox button on your controller stays on.

    3) Try your controller and see if this fixes your controller.

    Recommended Reading: How To Find Mac Address On Xbox 360

    Ensure That The Firmware Is Updated

    If your Xbox controller keeps on disconnecting, its important to update the firmware. Many people confuse the drivers and firmware. While drivers are crucial to connect your controller to a console, firmware is also vital.

    This is so because it operates the controller. Thus, if your driver is up-to-date, then check whether your firmware is also up-to-date or not. If its not, then the issue lies right there as your controller might be facing difficulty in operating.

    As a result, it keeps disconnecting from the console. So, to update your firmware, follow the instructions given below:

    • Connect the console with your Xbox controller using a USB cable.
    • Go to the Xbox Live and log in to your account on your console.
    • Now take your controller and go to the menu.
    • Open the Settings.
    • Now click on the Devices and Accessories option.
    • Tap on your controller from the given list.
    • To update the firmware, tap on the Update option.
    • Finally, to proceed, click on the Continue option.

    If you are using the latest version, a message will appear stating No updates needed. Thus, you can refrain from it. Otherwise, install the latest version. Reboot the system once you have completed the process.

    Why Does My Xbox Controller Keep Disconnecting But Stay On

    NEED HELP, Controller Intermittently Disconnects and Struggles to ...

    Your controller needs new batteries. The firmware in your controller needs to be updated. Your controller is too far away from the gaming console. There are too many devices connected to your gaming console.

    How do I connect my wired Xbox 360 controller to my PC?

    Set up a wired controller on a Windows 10 PC

  • Plug the Xbox 360 controller into any USB 2.0 or 3.0 port on the computer.
  • Windows 10 will automatically install drivers for your controller, so you wont have to download or install software other than Windows 10 updates.
  • Do Xbox 360 controllers work on PC?

    Can you connect an Xbox 360 controller to a PC? Yes, easily. If you have a wired controller, you just need to plug it into a 2.0 or better USB slot, and Windows will install needed drivers automatically.

    You May Like: Why Does My Xbox Not Turn On

    Why Does My Xbox Controller Keep Randomly Disconnecting

    Xbox Series X Controller Keeps Disconnecting?How to Fix It

  • Try Backward-Compatibility.
  • Reset and Re-Sync Your Series X Control Pad.
  • Use a Wired Connection.
  • Hard Restart Your Xbox Series X Console.
  • Ensure Your Series X Controller Has the Latest Firmware.
  • Ensure Your Xbox Series X Console Has the Latest Software Update.
  • 19 Jan 2022

    Don’t Let A Glitched Controller Mean Game Over

    The Asurion Home+ protection plan offers peace of mind for all of your eligible home tech, including your favorite gaming systems, for less than $1 per day. From graphical glitches to faulty drives, we cover your video game console and original controller from the unexpected breakdownâno matter where or when you purchased it. Learn more at asurion.com/homeplus.

    The devices we love arenât cheap. Protect them with Asurion Home+.

    Weâll cover all your favorite home tech for less than $1 per day. No receipts or registration forms required.

    Recommended Reading: How To Open Original Xbox

    Fix: Xbox One Controller Disconnecting Appualscom

    Jul 12, 2021 Fix: Xbox One Controller Disconnecting · Solution 1: Disable NVIDIA wireless controller service · Solution 3: Quitting Steam · Solution 4:

    Why Does Xbox One Controller Keep Disconnecting According to some Xbox users, the Xbox One controller disconnecting problem could be caused by the

    Jan 20, 2008 My new Xbox 360 controller does this disconnecting shit. It will randomly disconnect whenever I move it around even with brand new batteries 39 posts · I cant help you fix it, but I have the same problem with an old one I got with a refurbished

    Update The Controllers Firmware

    if your xbox controller disconnects randomly, try this trick

    Another common cause of Xbox keeps disconnecting from controllers is outdated firmware.

    In particular, your controller becomes unstable and glitchy when it needs an update. After some time without an update, it may also fail to sync with the Xbox.

    That said, if your connection is unreliable, the console may fail to update the controllers firmware automatically. So, you may have to do it yourself:

  • Turn on the console
  • Connect your controller to the console via USB
  • Sign in to Xbox Live
  • Press the controllers Xbox button
  • Go to Profile & system
  • Read Also: Why Is My Xbox Fan So Loud

    Power Cycle The Console

    If the battery is okay, you may be dealing with a random bug preventing the proper connection.

    The solution is power cycling the console, a type of reboot that erases random bugs. It could allow you to restore the connection by eliminating technical glitches.

  • Press and hold the consoles power button for 10 seconds to turn it off
  • Unplug all of its cables for 30 seconds
  • Press and hold the power button to drain the remaining power
  • Plug back all of the cables
  • Press the power button again to power the console back
  • After you reboot the console, try connecting your controller back again.

    Fix : Update Your Xbox One Controller Driver

    If you have connected your controller to your PC but it keeps disconnecting, its possible that you are using the wrong Xbox One Controller driver or its out of date. So you should update your Xbox One Controller driver to see if it fixes your problem. If you dont have the time, patience or skills to update the driver manually, you can do it automatically with Driver Easy.

    Driver Easy will automatically recognize your system and find the correct drivers for it. You dont need to know exactly what system your computer is running, you dont need to be troubled by the wrong driver you would be downloading, and you dont need to worry about making a mistake when installing. Driver Easy takes care of it all.

    You can update your drivers automatically with either the FREE or the Pro version of Driver Easy. But with the Pro version it takes just 2 steps :

    1) and install Driver Easy.

    2) Run Driver Easy and click the Scan Now button. Driver Easy will then scan your computer and detect any problem drivers.

    3)Click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system .

    You can do it for free if you like, but its partly manual.

    4) Restart your computer for the changes to take effect.

    5) Check to see if your controller works properly. If its still no joy, please move on to Fix 7, below.

    Don’t Miss: How Much Is Injustice 2 On Xbox

    The Bottom Line Why Does My Xbox Controller Keep Disconnecting

    Xbox controllers are no stranger to connection issues. It can be an extremely frustrating problem, for what seems like such a simple product.

    Most of the time, it is a relatively simple fix, but the difficulty is knowing what is causing the issue. Thats why its probably easiest to try all of the above methods, and see which fixes the issue. None of the solutions take very long, so you may as well keep trying until you find a fix!

    If you are having problems with your Playstation 4 Controller we have a great article How To Fix PS4 Controller Red Light Issue.

    Close Steam And Oculus Home

    Xbox Controller Keeps Disconnecting

    Steam and Oculus Home are two services that have access to system hardware and settings.

    For no apparent reason, sometimes they conflict with Xbox controllers and keep turning them off or disconnecting them.

    Try closing the Steam and Oculus Home apps and see if the issue resolves. If not, do the following:

  • Disconnect the controller and then type Task Manager in the Windows search box to run the app.
  • Head to the Process tab and locate Steam Client Bootstrapper.
  • End the process and keep ending all the Steam processes one by one.
  • Connect the controller to your computer and check if the problem has gone away.
  • Recommended Reading: How To Find My Xbox Ip Address

    Why Does My Xbox 360 Controller Keeps Disconnecting

    Why does my Xbox 360 controller keeps disconnecting?

    Dead batteries are by far the most common reason a controller turns off

    How do I resync my Xbox 360 controller?

    How do you fix a wired Xbox 360 controller that keeps disconnecting?

    Power cycling

    Why is my Xbox controller not connecting to anything?

    restart your controller

    What To Do If Xbox Keeps Disconnecting

    There are a handful of things that might be responsible for this issue. So, to overcome it, you need to first identify the cause. You can start by checking the bandwidth issues. Also, reboot the equipment providing a network to your console and controller. Ensure whether you are using updated firmware and driver.

    You May Like: Is Portal 2 On Xbox One

    Update Xbox Controller Via Xbox Accessories App

    To fix the Xbox One Controller disconnecting issue, you can install the Xbox Accessories app on your PC and use it to update the controller as explained below:

    1. Connect Xbox Controllerto Windows PC using a USB cable or use the Xbox Wireless Adapter for Windows.

    2. Launch Google Chrome app by typing in the Windows search bar and clicking on Open.

    3. Open the official Microsoft Store website for the Xbox accessories app and click on the Get in Store app button.

    Note: Click on the Open Microsoft Store button on the pop-up screen and install the Xbox accessories app from the Microsoft Store.

    4. Launch the Xbox accessories app on your PC using the search bar. The app will automatically identify the Xbox controller connected to your PC and will be displayed on the screen.

    5. Click on the three horizontal dots button on the screen to view the options for the selected controller. Here, click on the Update tab & wait till the update is completed.

    Note: If the controller is updated, the message No console update available will be displayed instead.

    How To Fix Xbox Controller Keeps Disconnecting

    Xbox Series X/S: How to Fix Controller Disconnecting Randomly Tutorial! (Easy Method) 2021

    GamingEdit is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

    Controller troubles can be some of the most frustrating issues for console gamers. If your wireless Xbox controller keeps disconnecting, its not always obvious what the reason is. In this article, well help you identify and fix the problem for good.

    You May Like: How To Turn On Xbox 360 Controller

    How Do You Fix A Broken Xbox 360 Controller

    Its happened to all of us. Youre in the middle of a heated gaming session, and your Xbox 360 controller suddenly stops working. Maybe the left joystick is no longer responding, or the buttons arent registering any input at all. What do you do? Luckily, there are a few ways to fix a broken Xbox 360 controller.

    In this blog post, well outline some of the most common fixes for a broken controller, as well as how to prevent it from happening in the first place. Lets get started.

    1. Open the Xbox 360 controller 2. Remove the broken piece from the controller and replace it with a new one 3. Put everything back together in reverse order of how you opened it up 4. Test your Xbox 360 controller to make sure it works properly before putting it away for good!

    Ways To Fix An Xbox Wireless Controller That Keeps Shutting Off Frequently Asked Questions

    One potential workaround for the connectivity issue is resetting your Xbox Series X control pad. You can achieve this without being connected to. There are a few potential reasons why your controller might be disconnecting from your PC. One possibility is that your controllers battery is low and needs to. Xbox Wireless Controller disconnects or cant connect · Solution 1: Restart your console · Solution 2: Replace the batteries or recharge the battery pack.

    Why Does My Xbox Controller Keep Disconnecting Pc? How Tos Guru Methods to Download, Install and Update Xbox 360 Controller Drivers for Windows 10, 8, 7

    Recommended Reading: Do You Need An Adapter For Xbox One Headset

    Tweak Power Management Settings Of Controller

    Once the Windows goes into Power Saving Mode, it turns off or disconnects the devices that havent been used for some time.

    That could also be the case for the Xbox controller, and you have to turn this feature off:

  • Type Device Manager in the Windows search box and run the app.
  • Find the Xbox controller in the list, most probably located in Xbox adapter windows.
  • Right-click on it and select Properties.
  • Select the Power Management tab and uncheck the box next to Allow the computer to turn off this device to save power.
  • Reboot the PC, reconnect the controller, and see if the issue disappears.
  • Xbox 360 Wireless Controller Disconnects Or Can’t Connect

    Xbox One Controller Keeps Disconnecting On PC (Fixed)

    This may mean one of the following: The Xbox 360 Wireless Controller batteries are weak, or the Xbox 360 Rechargeable Battery Pack needs recharging. Another wireless device, such as a microwave oven, a cordless phone, or a wireless router, is causing interference. Four controllers are already connected to the console.

    Recommended Reading: How Do You Connect An Xbox Controller To Your Phone

    Disconnect And Reconnect Your Controller Once Again

    You can take this method as an extension to the previous one. But, this time, you will unplug the cables as well to restore the weak connection. All you need to do is unplug the connection cable and plug it in again.

    After that, reboot the system and reconnect your controller with the console. Check whether it has solved the error or not. If not, you can further try to change the cables altogether and use the new ones.

    Nonetheless, if you are using a wireless connection, then low bandwidth could be the issue. Thus, to fix it, you need to pair both the devices again after disconnecting them. So, to reconnect your controller with the console, follow these steps:

    Steps for Xbox
    • Long press on the connectors connect button till the button on the Xbox flashes.
    • Repeat the above step with the controller.
    • Check whether your Xbox controller has established a connection once again or not.
    Steps For Windows PC
    • Open the Settings and and Devices option.
    • From the paired devices list, find your Xbox controller.
    • Now open the menu and remove it from the list.
    • The guide button of your Xbox controller will start to flash.
    • To pair the devices again, click on the Pairing button on your Xbox controller.
    • On your PC, open the Bluetooth settings and tap on the Add a Bluetooth device option.
    • The name of your controller will appear on the list. Tap on it to pair.

    Fix : Check The Batteries

    A battery issue is likely the most common reason that the controller is disconnecting. If you are using disposable batteries, try replacing them both, and see if this fixes the problem. If you have a battery pack, give it a recharge.

    Useful Tip The battery life of your controller is displayed on the home screen of your console as a percentage bar.

    You May Like: What Games Are In The Xbox Game Pass

    Is Bluetooth Better For Xbox Controllers Or Wire

    Most of the time, the disconnecting error arises in cases of wireless connection. Not to mention, you have to stay within a specific range for the smooth functioning of the controller. Thus, if you have to choose between Bluetooth and a wired connection, you must go with the wired one. Also, the wired connection provides you with a faster response.

    More articles

    Popular Articles

    How To Set As Home Xbox