Connect Your Xbox Controller To Pc With A Usb Adapter
If you have an older Xbox One controller, or you just want to use your newer one with Microsoft’s proprietary wireless connection instead of Bluetooth , you need to get the;Xbox Wireless Adapter for Windows 10. It’s a USB dongle designed to connect directly to your Xbox gamepad without any Bluetooth setup or pairing. All you need to do is plug in the dongle and pair it to your controller just as if you were pairing your Xbox, pressing the Pairing button on each device.
How Can I Make Sure My Xbox Controller Has Bluetooth Capability
For those looking to use their existing controllers, the easiest way to check is to look at the controller. If the area around the Xbox button is part of the same piece of plastic as the rest of the controller, it has Bluetooth. On the other hand, if your Xbox button is recessed within a separate piece of plastic, it doesn’t have Bluetooth. Reference the image below if you need help. If your controller has Bluetooth support, it should look like the bottom photo.
The best thing to do for those who already own the controller is to try it out. If you don’t own one, be sure to search around for your specific phone to see if others have had success, as you don’t want to be dropping cash for something that doesn’t work.
How To Use Xbox Controllers On Pc
On a Windows 10 PC, you can plug in Xbox 360, Xbox One, or Xbox Series X|S controllers to play certain games.
Some PC games require a controller, and few controllers beat Xbox when it comes to PC gaming. Xbox 360, Xbox One, and Xbox Series X|S controllers can all be used to play games on Windows 10 PCs–for the latter two, you can even connect them to your machine wirelessly.
There are actually a few ways to connect an Xbox controller to your PC. A wired connection is the easiest to do, though the two wireless options aren’t that difficult to pull off either. It really just comes down to your personal preference.
How To Connect With The Xbox Wireless Adapter For Windows
This process is nearly as simple as connecting with a USB cable, and is basically identical to connecting the controller to an Xbox console.;
1. Plug the Xbox Wireless adapter into a USB port.
2. Turn on your Xbox One controller by holding the Guide button in the center. Now press the the small sync button on the top of the controller until the Guide button begins flashing.
3. Press the small sync button located on the side of the Xbox Wireless adapter for a couple seconds. Watch the flashing Guide button on the controller. When it goes solid, you’re connected!
How To Update And Configure The Xbox One Controller
It’s not just games that have updates these days. So do controllers! While it’s not necessary to update your Xbox controller, if you want to, the process is pretty simple.
1. Open the Windows Store and search for Xbox Accessories. Install the app and open it.
Windows version note: The app only works with Windows 10 with the Anniversary update applied.
2. Plug your Xbox One controller in with a micro-USB cable.;
3. Click the “More options” button to check if there’s a firmware update for your controller.
Instead of configuring controller options on a game-by-game basis, you can also use the Accessories app to change button mapping, swap and invert sticks and triggers, and enable or disable rumble.
If you have an Xbox One Elite controller, you can also use the Accessories app to configure options like trigger and analog stick sensitivity. You can save different configurations to the two profiles the controller supports.
Also Check: Razer Nari Essential Xbox
How To Tell If An Xbox Controller Is Bluetooth
- How to Tell If an Xbox Controller Is Bluetooth
With the advances in technology, you are no longer stuck being wired into the console when you play on Xbox. You can use Bluetooth wireless controllers and these controllers are compatible with programs that run on Windows 10 as well. You just need to know whether your controller is Bluetooth or not. Read on to learn how to find out.
Ask A Tech Professional
If you still have questions after you try the methods above, you can ask a tech professional. There are experts who know all about electronics and they will be able to tell you if your controller is Bluetooth. You can also look for a button that flashes when you try to pair the controller with the Xbox console or the PC. If it isnt Bluetooth, you will not have this option.
If you do have a Bluetooth Xbox One Controller, it is easy to pair. You can turn the controller on by holding down the Guide button. There is also a pairing button on top of the controller and you can hold it for three seconds. The Guide button will flash when it is in pairing mode. Once it flashes, you can hold down the pairing button on the console.
You should go in your system tray and click on Add Bluetooth or other device. You will select Bluetooth, and then Xbox Wireless Controller. Once the Guide button is white and the menu tells you that the controller is connected, you can begin play.
In spite of the differences between the Bluetooth controller and the standard controller, both work on all of the consoles. New consoles are all sold with Bluetooth controllers so the question of whether a controller is Bluetooth or not most often refers to used controllers and consoles. People want to know how to tell the difference when they are looking at a used console and controller.
Also Check: How To Connect Xbox One To Hotel Wifi
How To Connect Xbox Controller To Pc Using Bluetooth
Bluetooth is a convenient way of connecting your Xbox One controller and PC. However, to use it with an Xbox One controller, you must have the newer model, as shown in the image below. All Xbox Series S|X controllers support Bluetooth.
If your Xbox One controller has the plastic casing around the Xbox button, as shown in the top illustration, then it is not Bluetooth-compatible. You’ll need to use the Xbox Wireless Adapter if you want to connect your Xbox controller to your PC without Bluetooth. The bottom model, where none of the plastic surrounds the Xbox button, supports Bluetooth.
Read more: Does Your Computer Have Bluetooth Built In?
To use Bluetooth, head to Settings > Devices > Bluetooth & other devices in Windows 10. Enable the Bluetooth slider , then choose Add Bluetooth or other device. Select Bluetooth from the list.
Next, press the Xbox button on your controller to turn it on. Then press and hold the Pair button on top of the controller for a few seconds, and the Xbox button will start flashing rapidly.
From here, your Xbox controller should show up in the Bluetooth pairing menu on your PC. Select it and complete the steps to pair them. If you have trouble, refer to our guide on setting up Bluetooth in Windows 10.
How To Connect Xbox Controller To Pc: Connect Via Bluetooth
Before attempting to connect your Xbox wireless controller via Bluetooth, its important to check your controller actually supports the feature.;
If youre using an Xbox Series X controller, then youre good to go. If youre using an older Xbox One controller, things are a little trickier.;
The refreshed controller that launched with the Xbox Series S does offer Bluetooth, while the original Xbox One controller doesnt. If youre unsure which you have, the easiest way to tell the two apart is by the plastic moulding at the top or by the fact that the newer controllers have a 3.5mm headphone jack on the bottom.;
If youre missing that port, then unfortunately you have an Xbox One pad that doesnt include Bluetooth.;
1. Open the Bluetooth & other devices menu on your PC. Just type Bluetooth into the Windows search bar located in the left-hand corner of your screen and youll get the option to go to the Bluetooth & other devices menu. Ensure that Bluetooth is turned on here.2.Turn on your Xbox controller by pressing the Xbox button. Once your controller is switched on, hold the sync button on top of the controller until the Xbox logo begins to flash rapidly.;
3. In the Bluetooth settings menu click Add Bluetooth or other device and then select Bluetooth from the popup menu. After a few seconds of searching your Xbox controller should appear on the device list. to pair it with your PC. ;
Don’t Miss: Original Xbox Manual Eject
Lets Make A Connection
Prior to attempting to connect the Xbox One S controller to your PC via Bluetooth, make sure you put your batteries in and its able to power up. We cant tell you how many times weve heard reports of people complaining they cant connect their Xbox One to their console, or PC, to only it didnt have batteries.
OK – now that your controller is powered up, hold the Xbox Ones Wireless Enrollment button, which is located towards its top above the Xbox button, but over a bit to the left. Hold the Wireless Enrollment button for about three seconds, which will result in the Xbox button to begin pulsating. This means the controller is searching for a console or PC to connect to.
While the controllers light is pulsating, go to your computer and click on Start > Settings > Devices > Bluetooth. Once there, your PC will search for a new Bluetooth device. Your Xbox One S controller wont pop up immediately as it will first be searching for an Xbox One or PC with a wireless adapter to connect to. Once it doesnt sense either of those, its Bluetooth will kick in, which will allow it to become visible to your computer. Click on the Xbox One S controller that pops up, click on the Pair button, and then wait a few moments for it to connect to your PC.
Which Bluetooth Headphones Work With Xbox One
Technically, the answer to that question is “none.” Whether it’s PlayStation, Xbox, or Nintendo, none of the current generation consoles natively support Bluetooth audio. They have Bluetooth capabilities, but they’re basically just there for wireless controller connectivity. That said, the word “technically” always leaves some space for exceptions, and that’s the case here, even if said exceptions aren’t ideal.
If you already have a pair of Bluetooth headphones that you really like, there’s no need to sink into despair just yet. There is a workaround that we’ll get to shortly. The good news is there are a bunch of wireless gaming headsets built with Microsoft’s special “Xbox Wireless” technology in mind. Microsoft has a special page on its online storefront just for Xbox-compatible headsets. Some of the most noteworthy models include:
I’ll also take a second to shout out Microsoft’s official solution, the aptly named Xbox Wireless Headset. It costs $100 and works with the Xbox One and the newer Xbox Series consoles. The only real issue is that, like anything else that’s related to the next-gen consoles, it can be hard to find in stores.
Most of the other options listed above cost more, but you may find them easier to snag. Of course, these things change over time, so the Xbox Wireless Headset probably won’t be rare forever.
Recommended Reading: How To Manually Eject Disc From Xbox One
How To Pair Bluetooth Headphones To An Xbox Controller With No Audio Jack
If you have the original Xbox One controller, to connect your headset to the console youll need two things:
- Bluetooth transmitter
- Xbox One Stereo Headset Adapter
The first round of Xbox One controllers didnt even have a 3.5mm audio jack. Whether youre connecting wireless or wired headphones, you need the Xbox One Stereo Headset Adapter .
This bit of kit was originally intended to connect wired headphones to the console by providing the missing 3.5mm female audio port.
It can still be used for your Bluetooth headphones.
- First, pop the headset adapter into the port at the bottom of the controller.
- Grab your Bluetooth transmitter and attach it to the 3.5mm wire dangling from the end of the headset adapter.
- Pair your headphones to the device.
How To Connect An Xbox Controller To A Pc: Use A Cable
Before we get into the steps, its important to note that this method of connecting an Xbox wireless controller to a PC is slightly different depending on what Xbox controller you are using. Xbox Series X, Xbox Elite Series 2 and Xbox Adaptive controllers require a USB-C cable, whereas the older Xbox One pad uses a Micro-USB cable.;
1. Plug a cable into your Xbox controller and PC. Whether youre using a USB-C or Micro-USB cable plug one end into your controller and the other into your PC.
2. With your controller and PC now tethered, press the Xbox button on the controller to switch the pad on.;
3. Now that your controller is connected and switched on, allow Windows to install the necessary drivers. This shouldnt take very long and is a one-and-done process. Next time you connect your controller to your PC you wont need to go through this step. Your controller is now connected. ;;
Read Also: How To Change Xbox Name On App
How To Connect Your Xbox One Controller With A Wireless Adapter
- Step 1: Purchase the Xbox Wireless Adapter .
- Step 2:;Connect Xbox Wireless Adapter to an open USB port on your PC. Complete the setup process for the adapter as outlined here.
- Step 3:;Press the Guide button on your controller to turn it on.
- Step 4:;Press and hold the sync button on top of the controller until the Xbox logo begins flashing .
- Step 5:;Press and hold the small sync button on the adapter. The Guide button will flash faster while searching for the pair. Once the Xbox logo on the controller stops flashing and turns solid, youre good to go.
How Can You Visually Tell The Difference Between The Original And The S Controller
As the One S controller has largely replaced the original One controller, its normal to worry that if you see a particularly good offer on an Xbox controller, you might accidentally be looking at an original rather than an updated S gamepad.
Thankfully, theres one quick, clear way to help identify the difference between the two generations of controller.
At the top of the centre of the controller sits the Xbox logo button which calls up your home screen when in game. On the original One controller, the plastic surrounding this button is noticeably glossy, unlike the matte finish used elsewhere on the controllers body, whereas on the S update, its more consistent with the rest of the controller. On white original controllers, this plastic will also be black, where on the S controller its white.
Another method of telling the white controllers apart is the D pad. The popular Lunar White controller option featured a gold D pad and triggers, whereas the S controller features the standard black.
Don’t Miss: How To Change Xbox Name On App
What Xbox One Controllers Have Bluetooth
Xbox One controllers have Bluetooth-enabled technology that allows the controller to a computer or laptop. Only certain controllers have this Bluetooth technology-enabled. ;
Xbox One controllers with Bluetooth are labeled by the color in the Xbox One logo on the top of the controller. These controllers are wrapped and packaged differently than other Xbox One controllers.
Not all controllers can connect to Bluetooth. There are a few things that the controller must have to connect it to Bluetooth.
Which Xbox Console Do You Have
The Xbox One wireless gamepad that is included in the Xbox One S package and others made after its release are all Bluetooth. The original Xbox One controllers are not, although you can still use them wirelessly with your PC. For the controller that is not Bluetooth, you will need a separate wireless dongle to connect them to the PC. Bluetooth controllers have been made since the advent of the Xbox One S so if yours was made after the first one of these machines, then it is probably Bluetooth.
Read Also: What Is Packet Loss On Xbox
The Open Source Solution From Github
This solution is hosted on GitHub as an open source project. If you want you can read everything it can do and also you can contribute to it if you feel so.
It is a really discrete app, that shows a little icon in your start menu as a status indicator for your Xbox One Controller battery. Can you spot it?
When you hover over, it displays a more detailed status.
It also claims that it works with multiple Xbox One Controllers as well that I couldnt test and confirm yet. Let me know in the comments if it really does.
How To Connect Bluetooth Headsets To Xbox One Using Optical
There is a third way to get Bluetooth on your Xbox: using a Bluetooth adapter that supports digital optical connections. This connection is typically for hooking up sound bars, but you can also use it to bring Bluetooth to your Xbox.
This wont apply to every transmitter but, alongside a 3.5mm port, some also have a digital optical cable. And at the back of your Xbox One, youll find a S/PDIF optical audio out port.
- Connect your Bluetooth transmitters digital optical to the S/PDIF port to the rear of the Xbox.
- Switch transmitter mode from 3.5mm to S/PDIF if your device supports it.
- Connect your headphones to the transmitter via Bluetooth.
Using digital optical out isnt perfect, though. Because its output-only, you wont be able to chat to your friends on Xbox One.
If youre gaming on the Xbox Series X|S, unfortunately the digital output connection is missing from the console, with Xbox head Phil Spencer all but saying not enough people used the port to warrant spending money on it.
However, most modern TVs also have an optical port, so you can always connect the transmitter that way.
Don’t Miss: How To Hook Up Bluetooth Headphones To Xbox One