Thursday, September 22, 2022

How To Take Apart Xbox One X

Don't Miss

How To Clean An Xbox One

Taking Apart The Xbox One X – Tech Wave!
  • Unplug your console from the outlet and remove its power cable.
  • Use the microfiber cloth to wipe down the entire surface and exterior of your Xbox. Do circular motions to buff out fingerprints, smudges, and dirt.
  • Loosen the dust in and around the consoles ports, vents, and openings with the soft-bristled brush. You can also use the can of compressed air to blow away dust in these areas, but be sure to do only short bursts.
  • Grab your vacuum and hold the handheld attachment or hose near the console to remove any remaining dust in the consoles vents and ports.
  • Use the microfiber cloth to go over the Xboxs surface one more time in case any dust has settled on top of it.
  • Remove The Face Plate And Back Cover Of Controllers

  • After unscrewing all the screws, the controller will come apart. Turn your controller, give a little shake, tap all the screws out and lift out the face plate carefully .
  • Next, flip the controller again and remove the back plate. Just be careful that you dont catch any wires.
  • You now have access to the rumble motors, triggers, and some additional screws that you can leave alone unless you need to replace specific components on the circuit board. To access most of the other components, remove the assembly from the front case and flip it around.

  • Now from the front side, you can clean the buttons, analog sticks, remove the analog sticks, remove the d-pad ring and d-pad, and more.
  • In this way we can easily take apart Xbox one controller for cleaning and repairing. Use the professional or normal screwdriver and follow the above steps very gently. To reassemble the controller, simply reverse all these steps again. Place the controller assembly back in the front case, close the rear case, tight again all screws and then cover the grip covers and battery cover back into place.

    Dissembling the Xbox One controller with Torx screwdriver may be the best option because its really easy to use. But if the Torx screwdriver is not available at your home and still you need to fix the controller ASAP, use the normal screwdriver for the same purpose.

    Best Value Xbox One Gamepad Disassemble Aliexpress

    2021 popular Hot Search, Ranking Keywords trends in Consumer Electronics, Cellphones & Telecommunications with xbox one gamepad disassemble and Hot Search,

    Sep 22, 2017 A size 10 Torx screwdriver is usually used when disassembling an Xbox game console and removing its screws. However, if you dont have

    Know how to disassemble xbox one controller easily on your own at your home so that you can repair its keys and other problems anytime.

    Also Check: How To Get Director Mode Gta 5 Xbox One Offline

    Reasons To Take Apart Your Xbox One Controller

    There are various reasons which require you to take apart your controller, ranging from simple cleaning to fixing issues with buttons or joysticks. Below are four possible reasons that warrant disassembling your Xbox One controller:

  • Drifting thumbsticks
  • Inoperable Audio Jack
  • Sticking buttons
  • Once youve successfully taken apart the controller, you will have access to each of these components and more, and you can attempt repairs without getting into advanced techniques like de-soldering wires.

    S To Disassembling The Xbox One Controller

    How To Take Apart Xbox One Slim

    Follow the steps below to take apart Xbox One controller

  • Use a tray to avoid any loss of the screws or other parts of the Xbox One Controller.
  • First of all, use a prying tool to separate the left or right grip cover.
  • After the covers start to separate, use your hands to carefully pull them off.
  • Remove both of the grips with this process.
  • Remove your battery cover and the battery.
  • Now you can unscrew the device, start with the hidden screw inside the battery place. Use the T-8 safety Torx bit, do this process carefully.
  • Now unscrew the screws at the grip with the help of a Torx bit or driver.
  • Do this for both of the grips.
  • When you unscrew the controller, it will come apart.
  • Now you can get access to the various components of the Xbox one controller. Includes rumble motors, triggers, and additional screws that should be untouched unless you need to replace any of the components from the Circuit board. To get access to more components, you can remove the assembly from the front end and take it out.
  • Here you can remove the analog sticks, d-pad ring, and d-pad, and many more. You can replace them I needed otherwise you can clean the buttons and all other components.
  • If your d-pad isnt working correctly, you can fix this. Use a pray tool or tweezer to pop off the spring steel d-pad ring.
  • Lift the d-pad arms, this will apply more pressure, and reassemble it. If the problem still persists, you need to replace it with a new d-pad ring.
  • Don’t Miss: How To Make Games Install Faster On Xbox One

    What You Need To Disassemble Your Xbox One Controller

    While its fairly straightforward to take apart an Xbox One controller, you still need tools that you might not readily have at your disposal. Below is the list of equipment you need to take your controller apart:

  • T-8 Safety Torx screwdriver
  • Flathead screwdriver
  • Plastic spudger or guitar pick
  • You even have the option to purchase an Xbox One controller tool kit online, if you dont want to gather each of the tools yourself.

    Remove All The Green Screws

    Xbox made things easy for us by coloring all of the screws that need to be removed green. Youll need your security-bit-set for this. Five long screws extend through the entire console to secure it to the other half of the case. Removing these will allow us to separate the hardware from the case entirely.

    Recommended Reading: How Does Xbox Live Work

    Repair Guide : Fan / Motherboard Xbox One S Sosav

    27 steps · 45 min · Materials: Cooling System Xbox One S, Fan Xbox One S, 29 1.Before disassembling your Xbox One S fan or motherboard, please turn off the console and unplug it, for obvious safety reasons.2.At the rear of the console, insert the spatula from the 6-in-1 opening kit between the black lower cover and the upper cover.Gently pry to release it 3.Do the same on one side of the Xbox One S.Gently slide the spatula all the way down to continue unclipping the hood.

    Nov 7, 2017 We pulled apart the new Xbox One X in our disassembly process, walking through the VRM, APU, cooling solution, and overall construction of

    Sep 18, 2019 One Teardown. This guide goes through each step required to disassemble an Afterglow Prismatic Wired. Controller for the Xbox One.

    How To Take Apart An Xbox One Controller For Painting Reddit

    Xbox One X Disassembly and Repairabilty!

    72 votes, 12 comments. 3.2m members in the xboxone community. Your one source for all things Xbox on Reddit!

    Oct 27, 2017 Before we go anywhere, take heed: tearing down your Xbox One X is not a good idea. Doing so will void your hardware warranty and likely any

    Jun 17, 2020 With How to Take Apart Xbox One Controller guidelines, you will get a better idea of disassembling the Microsoft gamepad in the easiest way

    Dec 15, 2020 Learn how to disassemble Xbox One controller without the help of any professional at your own home and clean or repair joystick.

    Nov 10, 2020 Here is how you take apart an Xbox Series X controller. Image via Microsoft. First, you are going to need to remove the textured grips from

    Don’t Miss: When Is The Xbox One X Coming Out

    How To Take Apart An Xbox One Controller

    Before you can take apart your Xbox One controller, find a clean and clear workspace that’s well lit. You will also need to obtain the following tools if you don’t already have them:

    • T-8 safety Torx
    • Prying tool

    You can use a Torx bit in a driver or with a socket wrench, or use a dedicated Torx driver, but it has to be a T-8 safety Torx. You can tell the difference between a regular Torx and a safety Torx by the small hole found in the tip of a safety Torx. Without this small hole, a regular T-8 Torx will not fit into the Xbox One controller screws.

    For the prying tool, you can use anything that’s thin enough to fit inside the gap between the controller housing and the end covers. Try to use a plastic tool if possible to avoid damaging the housing of your controller.

    Here’s how to take apart your Xbox One controller:

  • Use a prying tool to gently separate the right or left grip cover.

  • Once the covers have started to separate, you can finish carefully pulling them off by hand.

  • Repeat the process with the other grip cover.

  • Remove the battery cover.

    If your controller has never been taken apart, the sticker inside the battery compartment will be intact. You will need to push through the sticker with your Torx bit or cut it away to access the hidden screw.

  • You are now ready to remove the screws, starting with the hidden screw inside the battery compartment. Use a T-8 safety Torx bit, and be careful to properly seat it and apply even pressure to avoid stripping the screw.

  • How To Take Apart Xbox One Controller Without Torx

    ifixit.com Photo by ifixit.com

    Dissembling your Xbox One controller with Torx screwdriver may be the best option since its fairly easy to use. But if by chance you have none at home and still you need to fix that irksome unruly buttons on your controller ASAP, there is an alternative way.

    Follow the tutorial below to know how to take apart Xbox One controller without using a special driver.

    1. Prepare a 2mm slotted driver, preferrably electronics grade.

    2. Get your two millimeter slotted bit , there are seven screws including the hidden bonus screw.

    3. Wedge the screwdriver and you can unscrew them easily. Note that you have to unscrew all of them, or it wont come apart.

    4. Youve successfully taken apart Xbox One controller without using the special screwdriver!

    The good news is that you dont have to modify the screws, screwdriver, or go searching for a custom screwdriver to perform this tutorial on how to take apart Xbox One controller!

    Now thats all on how to take apart Xbox One controller, hope it helps!

    Also Check: Is Rocket League On Xbox 360

    How To Open Xbox One Controller Without Torx

    When it comes to Xbox controllers, 7 out of 10 of them will shatter if dropped. What if the controller falls and something goes wrong inside, and you realize that you dont have any Torx screwdrivers to open the dang thing? Then How to Open Xbox One Controller Without Torx?

    In any case, dont worry about it, my friend, because Ive laid out a series of instructions on how you should proceed. Find out by continuing to read.

    How To Clean An Xbox One Console Without Damaging It

    How To Take Apart Xbox One S To Clean

    Jan 14, 2020 You can clean your Xbox One properly by using a dry microfiber cloth you can use to clean your Xbox One, without opening up the console.

    Jun 13, 2021 Xbox One X Teardown, Repaste, & Reassembly Guide once I got it all down I decided to put my own spin on a teardown/disassembly video!

    May 17, 2017 Introduction This guide goes through each step required to disassemble an Afterglow Prismatic Wired Controller for the Xbox One.

    To disassemble your Xbox One, you will need the following items: Flathead screwdriver

    While you can take apart an Xbox One controller without too much trouble, there are a few potential snags to be aware of, and youll also need a couple

    Xbox One Skins Are a Bad Idea. Recent News. Replacement parts are here! You saw it right! I am finally offering replacement and repair parts again!

    Jun 14, 2021 What tool do you need to take apart an Xbox One controller?How do you take apart

    Compre Disassemble Screwdriver Repair Tool Parts For Xbox One / Xbox 360 Controller na Shopee Brasil! Description: This tool is specially R$7.30 · In stock

    Here I will show you how to take apart your Xbox 360 and clean it up! has a hard drive attached, however this one did not when it arrived for cleaning.

    Also Check: How To Use Xbox One Controller On Xbox 360

    How To Do A Power Reset On Your Xbox One

    Once it becomes clear the Xbox One itself is the problem, its time to try a power reset the systems internal power supply might be at issue, and note that we are here discussing the Xbox One X and S consoles well cover the original Xbox One in a moment.

    1. To do a power reset, disconnect the power cable from the rear of the console and wait a full ten seconds. Now, reconnect the cable, then press the Xbox button on the front of the system.

    2. If it turns on, youre all set.

    To reset the external power supply for the original Xbox One, do the following:

    1. Disconnect all cables from the console, the power supply itself, and the wall outlet.

    2. Wait 10 seconds, then reconnect the power supply to the wall, then the console to the power supply.

    What To Do When Your Xbox Gets Wet: 9 Steps

    Ok, so your Xbox has taken water damage or maybe lets just say that your Xbox has taken on some water. There could be a few possible reasons for this. Not that it matters much, but just in case you are wondering, lets run through them.

    It could have been out of your hands, and something happened, such as your roof started leaking or something like that. Maybe your sibling or your partner by accident spilled water or some form of liquid on your console. Or perhaps you did it yourself.

    Whatever happened, the best scenario would be that when it did happen, your Xbox was off. Why? Well, I am going to explain why in my 9 steps on what to do if your Xbox gets water in it. Be sure to bookmark this page and use it as a reference while going through these steps. Remember that opening your console could void your warranty if the water damage hasnt already done that.

    Read Also: Is Xbox Game Pass Worth It

    Unplug The Xbox Immediately

    As we discussed before, the reason why water is so bad for our electronics is that it amplifies the electricity passing through, and this blows the components of the console.

    So, the first thing that you want to do is unplug the console. Do not plug it back in until you have completed all these steps, and you have determined, with 100% certainty, that there is no more water in the console. If there is still water on the components and you plug it back in, you could be the reason it stops working.

    You first want to make sure that the plug at the wall is off and then unplug the Xbox. You also want to make sure that no components are plugged into your Xbox, such as your controller, cameras, headsets, or even a keyboard and mouse.

    Unplug everything and put your Xbox down.

    ifixit.com Photo by ifixit.com

    Dissembling your Xbox One controller with Torx screwdriver may be the best option since its fairly easy to use. But if by chance you have none at home and still you need to fix that irksome unruly buttons on your controller ASAP, there is an alternative way.

    Follow the tutorial below to know how to take apart Xbox One controller without using a special driver.

    1. Prepare a 2mm slotted driver, preferrably electronics grade.

    2. Get your two millimeter slotted bit , there are seven screws including the hidden bonus screw.

    3. Wedge the screwdriver and you can unscrew them easily. Note that you have to unscrew all of them, or it wont come apart.

    Xbox One X No Signal Issues

    How to Disassemble & Reassemble the Xbox Series X/S Controller

    The Xbox One X Black Screen of Death or No Signal issue can appear in a couple of different ways:

    • When the console is connected to the display the screen will show as black with no picture or possibly black that fades to blue and then back to black.
    • When the console is connected to the display the screen will show a message saying Game console or something similar.

    This problem is most commonly caused by a faulty hard drive or by an HDMI issue with either the HDMI port being damaged or one of the related chips on the motherboard not working correctly. However, the problem can also be caused by a damaged or dirty HDMI cord so you’ll want to follow the steps below first before trying to repair the console itself.

    If your console has no signal you should try the following steps first:

  • Check that your HDMI cord is fully plugged into both the tv and console.
  • Inspect the HDMI cord at both ends for damage or dirt and clean it carefully if needed.
  • Try another using an HDMI cord you know works OR, if you only have one cord, try plugging in a different console to see if it works.
  • Inspect the HDMI port to see if it is dirty or has anything stuck in it and clean out the port gently as needed.
  • Check that the HDMI port is not loose.
  • If you’ve followed the steps above and your console still has no signal it will likely need to have the hard drive replaced OR one of the HDMI components.

    Don’t Miss: How To Hardwire Xbox One

    Power Supply Fan Airflow

    This machine has an internal power supply, meaning you’re not using the same HUNK power cord provided with the original Xbox One X. This power supply is 240w strong and takes up a little less than 1/4 of the inside of the case. This power supply connects with the fan through a system of plastic which also runs over the heatsink mentioned below much air, so cool, such flow.

    A 120mm fan takes up a large portion of the inside of the case of the Xbox One X. This amalgamation of plastic and metal covers part of the heatsink . Another 1/4th of the internal space here is taken up by the Blu-ray disk drive super simple, held in place by more T9 screws.

    OF NOTE: You’ll need to be extra careful in removing these parts, as their exact arrangement is vital to the cooling in the console. Don’t go fooling around in the following open area in the power supply, for example:

    Like the Xbox One and the Xbox One S, the Xbox One X has a system that detects rising heat within the console. When it detects the heat rising too quick, it shuts down to prevent permanent damage. If the cooling system is taken apart and put together wrong, this detection system will start turning off the Xbox One X after only a few minutes of use.

    More articles

    Popular Articles