Friday, December 9, 2022

How To Take Apart Xbox One To Clean

Don't Miss

How To Open The Xbox One Or Xbox Series X/s Controller

How to Open an Xbox One Console

Before proceeding, ensure your Xbox One controller is powered off. Place it on a table or similar hard surface with the tools within easy reach.

Follow these steps to open the Xbox One controller.

  • Remove the door to the battery compartment and set it aside.
  • Remove the batteries, saving them for later.
  • Using the plectrum or spudger, detach the plastic panels on the back of the controller’s “handles” where the controller sits in your hand. This can take a while, so take your time patiently wiggling the plectrum along each edge to unclip them.
  • With the controller face down, unscrew the five Torx screws. You’ll find two on the left, two on the right, and another beneath the label in the battery compartment. Put the screws aside safely for later.
  • The back panel should now simply lift off.
  • You can now lift out the main controller. Notice how this is a secondary plastic case, which houses a pair of PCBs .
  • At this stage you can now replace thumbsticks, D-pad, and the other buttons if you’re planning on some customizations.
  • Further disassembly at this stage requires some electronics knowledge so don’t proceed if you’re inexperienced with PCBs and electrical components .

    Congratulations—you’ve successfully taken apart your Xbox One controller.

    Best Value Xbox One Gamepad Disassemble Aliexpress

    2021 popular Hot Search, Ranking Keywords trends in Consumer Electronics, Cellphones & Telecommunications with xbox one gamepad disassemble and Hot Search,

    Sep 22, 2017 A size 10 Torx screwdriver is usually used when disassembling an Xbox game console and removing its screws. However, if you dont have

    Know how to disassemble xbox one controller easily on your own at your home so that you can repair its keys and other problems anytime.

    Use Antibacterial Spray And Wipes

    Before reassembling the Xbox One controller, take a moment to clean every surface, inside and out, with an antibacterial wipe. For any surface that cannot be wiped, use antibacterial spray.

    With this extra level of cleaning, you help to ensure that the Xbox One controller is thoroughly cleaned. It’s a smart step to take if you’re concerned about managing cleanliness, or if the controller is widely used. Perhaps you have a busy house, or the controller is part of a public gaming system in a shop or club.

    Whatever the case, you now have a clean Xbox One or Xbox Series controller.

    Read Also: How To Take Off Parental Controls On Xbox

    Clean Your Xbox One Controller

    Keeping your controller clean is highly recommended, whatever the circumstances. From hygiene steps to manage infection control to keeping the Xbox One controller buttons responsive, cleaning is important.

    Microsoft recommends isopropyl alcohol for cleaning dirt use cotton swabs to clean difficult to reach areas. Most cleaning will take place around the plastic components. If you have a small vacuum cleaner, suitable for electronics, use this to collect any loose dirt that falls out of reach.

    Once reassembled, use disinfectant wipes to deal with infection risks.

    Xbox One S Cleaning Guide

    How To Take Apart Xbox One S To Clean

    The Xbox One S is coming up on its one year anniversary, which means some owners may want to consider cleaning the dust out of their systems. This guide will help you keep your Xbox One S living a long and happy life!

    This guide is not for the faint of heart! You’re going to take the Xbox out of its plastic case in this guide, which can be pretty scary! Ultimately, it’s not much more difficult to get into the inside of the Xbox One S than the PS4.

    What you’ll need:

    You can also look at iFixit’s tool kit which has most everything you need for the project. There are a few different options you can consider, so shop around for what you think will work best for you.

    Recommended Reading: Connect Xbox 360 To Xfinity Wifi

    To Help Keep Your Xbox One Fan Clean:

    • Use a can of compressed air to blast dust and dirt out of the air vents.
    • Once you’ve cleaned the vents, be sure to position your Xbox somewhere with good airflow to assist with cooling.
    • Clean your Xbox One console every three to six months to make sure it works like it should.
    • Give your Xbox the high groundâplace it somewhere off the floor and in the open rather than on a rug or inside a cabinetâto prevent heavy dust buildup. And keep it away from pets and small children that can cause messes or damage.

    If cleaning out the vents doesn’t do the trick, we recommend calling in professional help to clean your Xbox One fan as it will require opening your console, which could easily lead to damage. Stop by the nearest uBreakiFix by Asurion for help with all of your Xbox repairs as soon as same day.

    Reassemble An Xbox One Controller

    When you’re satisfied the Xbox One Controller is ready to use again, simply follow the instructions above in reverse to reassemble the device.

    Whether you’ve cleaned it or made a repair, once reassembled your Xbox One controller should be working as normal once again. If not, consider buying a replacement controller, or looking at other troubleshooting steps.

    Also Check: How To Update Xbox Controller

    Repair The Xbox One Controller Thumbstick

    Various repairs can be performed once the Xbox One controller is open. Unresponsive buttons can be checked and thumbsticks repaired.

    The Xbox One controller is prone to thumbsticks coming loose. In most cases this problem can be resolved by gluing a small pole of metal—perhaps from a thumbtack—into the thumbstick itself and pushing this into the analogue controller mounted on the circuit board.

    How To Take Apart Xbox One Controller


    Xbox One controller is a controller that is compatible with PC and Xbox One. There might happen issues with its motors, buttons, and thumbstick. At this time you need to take apart Xbox One Controller, repair, or clean your controller and re-assemble it.

    Xbox One controller is full of actions. Therefore, the regular maintenance of the controller is important. In this article, we will provide you with the steps to take apart the Controller. These steps can be basically used for Microsoft Xbox One and Xbox One S Controller. Sometimes, these steps may differ for the third-party controllers.

    • Repair thumbstick
    • Clean the Controllers

    You May Like: How To Reset Family Settings On Xbox 360 Slim

    Remove All The Green Screws

    Xbox made things easy for us by coloring all of the screws that need to be removed green. You’ll need your security-bit-set for this. Five long screws extend through the entire console to secure it to the other half of the case. Removing these will allow us to separate the hardware from the case entirely.

    Tools For Taking Apart An Xbox One Controller

    Before going to take apart and disassemble an Xbox One controller, choose the clean and clear workspace at your home. It will help you to prevent screws or other parts from falling on the floor or getting lost. After that, try to arrange some tools for disassembling your Xbox one controller. Otherwise, its not possible for you.

    According to the Google search quarries, some users want to know how to how to take apart xbox one controller without screwdriver or how to open xbox one controller without torx. But believe me guys, dont go for teardown of your Xbox one controller without having the proper tools.

    • Screwdriver or T-8 safety Torx : If you are ready to tear down your Xbox One controller at your own home, use a Torx bit in a driver or use a dedicated Torx driver but it has to be a T-8 safety Torx. Its because a regular T-8 Torx will not fit into the Xbox One controller screws.
    • Prying tool : Use the professional paying tool or anything that is enough to fit inside the gap of the controller housing and the end covers. Alternatively, you can use the ATM card or visiting card or SIM card etc.

    You May Like: How To Clean Dust From Xbox One

    Remove The Back Cover

    The hardest part of the process is this first step, Xbox uses “Security Clips” to keep this back panel part in place. We found the easiest place to start is on the short side adjacent to the power input. From there, carefully work your way around the rest of the console feeling for where you can press in the security clips and pull the cover up.

    We recommend saving the extra security nub section for last, once you’ve already separated nearly all of the other security clips. Pressing in that small plastic piece will take a little extra coaxing but once you’ve pressed it in sufficiently, the back panel should free easily.

    Remove The Face Plate And Back Cover Of Controllers

    How To Take Apart Xbox One S Console
  • After unscrewing all the screws, the controller will come apart. Turn your controller, give a little shake, tap all the screws out and lift out the face plate carefully .
  • Next, flip the controller again and remove the back plate. Just be careful that you dont catch any wires.
  • You now have access to the rumble motors, triggers, and some additional screws that you can leave alone unless you need to replace specific components on the circuit board. To access most of the other components, remove the assembly from the front case and flip it around.

  • Now from the front side, you can clean the buttons, analog sticks, remove the analog sticks, remove the d-pad ring and d-pad, and more.
  • In this way we can easily take apart Xbox one controller for cleaning and repairing. Use the professional or normal screwdriver and follow the above steps very gently. To reassemble the controller, simply reverse all these steps again. Place the controller assembly back in the front case, close the rear case, tight again all screws and then cover the grip covers and battery cover back into place.

    Dissembling the Xbox One controller with Torx screwdriver may be the best option because its really easy to use. But if the Torx screwdriver is not available at your home and still you need to fix the controller ASAP, use the normal screwdriver for the same purpose.

    READ MORE : Watch Netflix On Nintendo Switch Gaming Console

    Don’t Miss: How To Connect Xbox To Hotspot

    How To Clean An Xbox One

  • Unplug your console from the outlet and remove its power cable.
  • Use the microfiber cloth to wipe down the entire surface and exterior of your Xbox. Do circular motions to buff out fingerprints, smudges, and dirt.
  • Loosen the dust in and around the console’s ports, vents, and openings with the soft-bristled brush. You can also use the can of compressed air to blow away dust in these areas, but be sure to do only short bursts.
  • Grab your vacuum and hold the handheld attachment or hose near the console to remove any remaining dust in the console’s vents and ports.
  • Use the microfiber cloth to go over the Xbox’s surface one more time in case any dust has settled on top of it.
  • Now You Know How To Clean Your Xbox One Controller

    From simple exterior cleaning to cracking it open to clean inside, your Xbox One or Series S|X controller should now be clean.

    We’ve given you everything you need to clean your Xbox One controller, except the materials. Be sure you have them on hand before you start cleaning. Keeping your game controller clean is something you can easily keep on top of with a quick wipe down. However, you should probably make a point of giving your Xbox One controller a deep clean once a month.

    Once you’re done with your game controllers, it might be time to make your workspace clean and virus free.

    Don’t Miss: Is Mk9 On Xbox One

    What You Will Need To Disassemble Your Xbox One Controller

    Opening an Xbox One controller isn’t as easy as cracking open an old radio. You can’t use standard screwdrivers to get inside an Xbox One controller. Instead, you’ll need a Torx screwdriver—and that’s not all:

    • Torx screwdriver
    • Flathead screwdriver
    • Plastic prying tools
    • Plastic spudger or disposable knife

    Don’t have all the tools needed to gain access to your Xbox One controller’s interior? Worry not—various Xbox One controller tool kits can be bought online.

    How To Take Apart Xbox One Controller Without Torx

    How to Clean Xbox One S – Complete Teardown – Photo by

    Dissembling your Xbox One controller with Torx screwdriver may be the best option since its fairly easy to use. But if by chance you have none at home and still you need to fix that irksome unruly buttons on your controller ASAP, there is an alternative way.

    Follow the tutorial below to know how to take apart Xbox One controller without using a special driver.

    1. Prepare a 2mm slotted driver, preferrably electronics grade.

    2. Get your two millimeter slotted bit , there are seven screws including the hidden bonus screw.

    3. Wedge the screwdriver and you can unscrew them easily. Note that you have to unscrew all of them, or it wont come apart.

    4. Youve successfully taken apart Xbox One controller without using the special screwdriver!

    The good news is that you dont have to modify the screws, screwdriver, or go searching for a custom screwdriver to perform this tutorial on how to take apart Xbox One controller!

    Now thats all on how to take apart Xbox One controller, hope it helps!

    Also Check: How To Unblock Someone On Xbox App

    S To Disassembling The Xbox One Controller

    Follow the steps below to take apart Xbox One controller

  • Use a tray to avoid any loss of the screws or other parts of the Xbox One Controller.
  • First of all, use a prying tool to separate the left or right grip cover.
  • After the covers start to separate, use your hands to carefully pull them off.
  • Remove both of the grips with this process.
  • Remove your battery cover and the battery.
  • Now you can unscrew the device, start with the hidden screw inside the battery place. Use the T-8 safety Torx bit, do this process carefully.
  • Now unscrew the screws at the grip with the help of a Torx bit or driver.
  • Do this for both of the grips.
  • When you unscrew the controller, it will come apart.
  • Now you can get access to the various components of the Xbox one controller. Includes rumble motors, triggers, and additional screws that should be untouched unless you need to replace any of the components from the Circuit board. To get access to more components, you can remove the assembly from the front end and take it out.
  • Here you can remove the analog sticks, d-pad ring, and d-pad, and many more. You can replace them I needed otherwise you can clean the buttons and all other components.
  • If your d-pad isnt working correctly, you can fix this. Use a pray tool or tweezer to pop off the spring steel d-pad ring.
  • Lift the d-pad arms, this will apply more pressure, and reassemble it. If the problem still persists, you need to replace it with a new d-pad ring.
  • Reasons To Take Apart Xbox One Controller

    If your Xbox Controller is not able to run there is definitely some problem. I hope you will try to fix it with the basic troubleshooting methods and have already updated the firmware.

    You can take apart Xbox One Controller to do some more fixes. Here there are some reasons that lead to this type of problem.

    • Drifting analog Sticks To solve this, you can clean the analog sticks and if necessary, you can replace them.
    • Malfunctioning D-Pad To solve this, you can solve this problem by carefully pry up the tabs which are on the spring assembly. This will push down with more force, moreover, you can replace them if required.
    • Inoperable audio jack You can check the jack is properly set up or connected, replace them if required.
    • Sticking Buttons For this problem, you will need to clean it. You can use the canned air or any other method to remove the dust stick to it. It is possible after removing the circuit board assembly from the controller housing.

    Read More: PlayStation 5: Everything You Need To Know About Sonys New console

    Read Also: Will Xbox 360 Play Blu Ray

    How To Clean Your Xbox One: A 10

    If youâre wondering how to clean an Xbox One controller and console, just follow these steps! Read on to find everything you need to know about Xbox One cleaning:

  • Always start by unplugging your Xbox One and removing the controller battery.

  • Place your console on a dry, flat surface such as a countertop or table.

  • Place a pin through the vents of your console, far enough in to prevent the fan from spinning during the cleaning process. Ensure you do not push it in to far so it cannot be retrieved. Hold in place for the next step.

  • Blow short bursts of air into the vents to remove the dust from the fan using your compressed air can. Alternatively, use a vacuum to suck out the dust.

  • Use a few bursts of compressed air to blow dusts from USB ports and the disc tray.

  • Use a clean, dry microfibre cloth to clean the surface and sides of your Xbox One.

  • Fold the cloth in half and use the clean side to wipe down the wires.

  • To achieve a clean Xbox One controller, first remove dust and dirt from the directional pad, joysticks and gap between the top and bottom of the controller using the business card to scrape it out.

  • Use a clean microfibre cloth to fully wipe down the surface of your controller. If you have stubborn marks or sticky spots slightly dampen the cloth. Ensure that no water gets into your controller or the battery area.

  • Clean your console or TV stand, wherever it is you keep your console before putting everything back in place.

  • Originally published

    More articles

    Popular Articles