Saturday, May 14, 2022

How To Take Apart Xbox One S To Clean

Don't Miss

Can I Use Putty Or Gel To Clean Sticky Buttons On My Controller

How to Clean Xbox One S – Complete Teardown

The answer is resounding sometimes. The cleaning putty and cleaning gels that are manufactured for electronics are created specifically for picking up dust and small amounts of dry debris. However, if your buttons are sticky due to the buildup of oils from your hands, it will likely not do the trick.

Moreover, it is important to regularly disinfect these types of devices. If not, bacteria can develop quickly. Considering the fact that you will likely be eating at some point while conducting this activity, it is a good practice to uphold.

How To Open An Xbox One S Console For Repair

One of the biggest benefits of consoles is their simplicity. In contrast to PC, a platform built with the goal of accomplishing any task, consoles are designed specifically for gaming. What you lose in flexibility you gain in hardware tailored for the experience and only one company making the parts.

Despite this closed ecosystem, sometimes there’s a reason to take a look inside your devices. While Microsoft strongly discourages users from opening Xbox One consoles, there are some valid reasons to whether performing minor tweaks or repairing a hardware issue outside of warranty. For those using Microsoft’s latest entry-level console, the Xbox One S, these are the steps to do so.

Warning: By opening an Xbox One, you will void your console’s warranty. This can be a risky activity for those new to opening/modifying electronics and is recommended only to those confident in doing so. Perform the following steps at your own risk, with the chance of damaging your Xbox One.

How To Open The Xbox One Or Xbox Series X/s Controller

Before proceeding, ensure your Xbox One controller is powered off. Place it on a table or similar hard surface with the tools within easy reach.

Follow these steps to open the Xbox One controller.

  • Remove the door to the battery compartment and set it aside.
  • Remove the batteries, saving them for later.
  • Using the plectrum or spudger, detach the plastic panels on the back of the controller’s “handles” where the controller sits in your hand. This can take a while, so take your time patiently wiggling the plectrum along each edge to unclip them.
  • With the controller face down, unscrew the five Torx screws. You’ll find two on the left, two on the right, and another beneath the label in the battery compartment. Put the screws aside safely for later.
  • The back panel should now simply lift off.
  • You can now lift out the main controller. Notice how this is a secondary plastic case, which houses a pair of PCBs .
  • At this stage you can now replace thumbsticks, D-pad, and the other buttons if you’re planning on some customizations.
  • Further disassembly at this stage requires some electronics knowledge so don’t proceed if you’re inexperienced with PCBs and electrical components .

    Congratulations—you’ve successfully taken apart your Xbox One controller.

    Recommended Reading: How To Take Off Parental Controls On Xbox

    How To Clean Residue Off An Xbox Disc

    Use the microfiber cloth to wipe down both sides of the disc, especially the underside. You can add a small amount of rubbing alcohol to the cloth to buff out sticky spots, but be sure to let the disc completely dry before re-inserting it into your Xbox.

    That’s it! Once you’ve cleaned your Xbox One console, controllers, and discs, you can get back to enjoying the games you love.

    Four Reasons To Take Apart An Xbox One Controller

    How To Take Apart Xbox One S To Clean

    Your Xbox One controller gets a lot of action. As a result, it needs to be regularly maintained. Beyond occasionally wiping the buttons clean, you probably don’t do this.

    However, maintenance to ensure long term performance from the controller requires you need to know how to safely take the Xbox One controller apart. This might be to:

  • Repair or replace a thumbstick
  • Repair or replace a button or trigger
  • Check battery connections
  • Clean any dirt that has accumulated around the controls
  • Keep reading to learn how to open your Xbox One controller for cleaning and repairs. Note that these steps are specifically for Microsoft-produced Xbox One and Xbox One S controllers rather than later or third party devices. If you have a third-party Xbox One controller, these typically feature eight screws than can be removed with a small Philips screwdriver.

    Having said that, you can use this guide to open a first generation Xbox Series X/S controller.

    Recommended Reading: Set Home Xbox One

    How To Take Apart A Microsoft Xbox One Controller

    The process for opening the Xbox One controller is straightforward with the right tools.

    • Remove the battery cover and any batteries
    • Remove the grip plastic
    • Unscrew the five Torx screws
    • Lift the rear cover from the controller
    • Lift the internals away from the front fascia

    Below we’ll go through the steps in more detail. Note that opening a first generation Xbox Series X/S controller follows the same procedure.

    Reassemble An Xbox One Controller

    When you’re satisfied the Xbox One Controller is ready to use again, simply follow the instructions above in reverse to reassemble the device.

    Whether you’ve cleaned it or made a repair, once reassembled your Xbox One controller should be working as normal once again. If not, consider buying a replacement controller, or looking at other troubleshooting steps.

    Recommended Reading: Do You Need Xbox Live To Play Minecraft On Pc

    Do You Need Receipt For Xbox One Warranty

    Similarly, do you need receipt for Xbox One warranty? You dont need a receipt if its still under warranty. Since the console came out in November, all consoles are still under warranty. You just register the console using the serial number on your Microsoft account and it shows you when the warranty expires.

    Check Out The Products Mentioned In This Article:

    HOW TAKE APART/DISASSEMBLE XBOX ONE S/X

    1. Unplug your Xbox One.

    2. Start by using a microfiber cloth to wipe down the entire exterior. These are often the same as the lens cloths used for eye glasses. Other versions for cleaning are called dust cloths.

    3. Use the cloth to carefully wipe down the outside of your console, including the top, bottom, front, back, and sides of the device. Routine cleaning will prevent heavy dust build up, which may require multiple cloths to fully clean your device. Use circular motions to rub off fingerprints or smudges on the plastic parts of your device, including the front and top.

    4. After cleaning the outside of your Xbox One, use a can of compressed air to carefully remove any additional dust build up inside the ports. These cans can be purchased in both cheaper or more expensive varieties. Regardless of which type you use, use short bursts to remove build up in the back ports and the vents of your console. Make sure you’ve unplugged your device before cleaning the back ports.

    5. Go back over the exterior with a cloth again to remove any of the dust that has settled atop your device.

    Read Also: How Do I Delete A Profile On Xbox 360

    How To Clean Your Xbox Controller

    Although you can go many months without noticing any grime on your controller, its probably littered with dust and hand oil after only a few weeks. In this guide on how to clean your Xbox controller, were going to show you how to get your controller looking brand new.

    In addition to cleaning the outside, were going to talk about taking apart your Xbox controller to clean the inside. This is an advanced process that could break your controller, so only attempt it if youre comfortable dealing with electronics. After youre done cleaning your Xbox controller, be sure to read our guide on cleaning your PS4 controller.

    How To Take Apart Your Xbox One Controller

    It might seem easier to just clean your Xbox One controller with an anti-bacterial wipe and move onto playing games. That’s certainly an option, but one best left until you’ve disassembled the controller and given it a deep clean.

    That’s right: you’re going to take apart your Xbox controller. Not sure how to do that?

    In fact, it is surprisingly simple. You’ll need the following:

    • Torx screwdriver
    • Flathead screwdriver
    • Plastic prying tools
    • Plastic spudger or disposable knife

    The principle is straightforward: use the prying tools and spudger to remove the plastic grip sections, then remove the screws. With the entire outer shell detached from the interior controls, the Xbox One or Series controller is ready for cleaning.

    Related: How to Take Apart an Xbox One Controller

    There are various other things you can do once an Xbox One controller is disassembled. Obviously, cleaning the controller is important, but once you’ve done that properly you might carry out repairs, replace thumbsticks, or even customize the controller.

    Keep this in mind as you gain familiarity with the process of disassembling the Xbox controller for cleaning.

    Recommended Reading: Connecting Xbox To Hotel Wifi

    How To Clean Your Xbox One Fan Without Opening

    Its pretty easy to figure your Xbox One fan needs cleaning. The fan runs noisier when its dusty. Also, your console runs slow. Usually, this happens in 3-4 years. Therefore if you dont do general cleaning of your console often, you may encounter this problem at an earlier stage.

    There are two main methods how to clean your Xbox One fan without opening it. First of all, you can use an air compressor. This is the safest method. If you wonder how to get one, you can get one shopping website like . Also, you can easily find an air compressor from your local hardware stores. They are pretty easy to use. First, you should wipe with a microfiber cloth. Its important to clean the dust as much as possible with the cloth. Then use your air compressor. The things you should consider while using the compressor are:

    • Be careful with the pressure
    • Always use the smallest head
    • Follow the guidelines of air compressor

    You can also use a compressed air can. The method is the same as the air compressor.

    The second method is to clean yourXbox One fan without opening it is to use a vacuum cleaner. Almost everybody has one and its easy to use. This method is very easy to apply but not that effective. All you need to do is to vacuum the console through the openings. You can watch this video to see both methods.

    How To Clean Your Xbox One: A 10

    How To Take Apart Xbox One S To Clean

    If youâre wondering how to clean an Xbox One controller and console, just follow these steps! Read on to find everything you need to know about Xbox One cleaning:

  • Always start by unplugging your Xbox One and removing the controller battery.

  • Place your console on a dry, flat surface such as a countertop or table.

  • Place a pin through the vents of your console, far enough in to prevent the fan from spinning during the cleaning process. Ensure you do not push it in to far so it cannot be retrieved. Hold in place for the next step.

  • Blow short bursts of air into the vents to remove the dust from the fan using your compressed air can. Alternatively, use a vacuum to suck out the dust.

  • Use a few bursts of compressed air to blow dusts from USB ports and the disc tray.

  • Use a clean, dry microfibre cloth to clean the surface and sides of your Xbox One.

  • Fold the cloth in half and use the clean side to wipe down the wires.

  • To achieve a clean Xbox One controller, first remove dust and dirt from the directional pad, joysticks and gap between the top and bottom of the controller using the business card to scrape it out.

  • Use a clean microfibre cloth to fully wipe down the surface of your controller. If you have stubborn marks or sticky spots slightly dampen the cloth. Ensure that no water gets into your controller or the battery area.

  • Clean your console or TV stand, wherever it is you keep your console before putting everything back in place.

  • Originally published

    Read Also: How To Get Gta Mods On Xbox One

    How Do I Clean Dust From An Xbox One Without Opening It

    Once you have the necessary items, it’s easy to clean your gaming system and keep it looking greatâand you don’t even need to know how to open and clean an Xbox One to do so. Neither Microsoft® nor our experts advise taking your console apart because it does not have a removable faceplate. Here’s what to do instead:

    How To Safely And Smartly Clean Your Dirty Xbox One

    After you’ve had your Xbox One console for a while, you’ll probably notice that it starts to get dusty. Dust can easily build up, and cause a problem down the line. That’s why we’ve put together this handy guide to cleaning your Xbox One. Here’s what to do and what not to do to keep your console shiny and clean!

    You May Like: Broadcast On Xbox

    Clean Inside The Xbox Controller

    The next stage is to clean the interior body of the Xbox One controller.

    This means wiping around the buttons and lifting them off if necessary. The same applies to the D-pad and thumbsticks.

    Shoulder buttons and triggers should also be cleaned. Take care here, as pushing in the wrong way can detach the mechanism. Similarly, the rumble motors should also be gently cleaned as these can pick up dirt and dust.

    Can I Use A Regular Screwdriver To Take Apart My Xbox One Controller

    How to Take Apart Xbox One S Complete Teardown (Easy Method!)

    You should always use the appropriate tools when taking apart your controller. The screws used to hold this device together have six points, not four. While you may be able to get a Phillips or flathead screwdriver to work in a pinch, you will likely strip the screws in the process.

    Thankfully, there are kits available online that include the correct Torx screwdriver as well as cleaning supplies to help you properly maintain your device. If you are an avid gamer, it is a worthwhile investment.

    Recommended Reading: Xbox Picture Size

    How To Open Your Xbox One Fan

    Also, you can open your Xbox One to clean the fan. But, this process is highly risky if you dont have experience with such a thing. If you have previous experience at opening electronic devices and youre handy, its actually not too difficult. If you will use this method, its important to have necessary tools like small screwdrivers for electronic devices in your home. Be careful that your Xbox One is unplugged. There are so many tutorials on the internet, especially on Youtube. You can watch this example and see how to do it. If you arent confident with this matter, it would be better to seek professional help.

    The Cause For Sticky Buttons

    It is not an ideal situation. Over time and with frequent use, dead skin cells, dirt, dust, oils and food debris accumulate within the crevices of most electronics, particularly with gaming controllers. This can lead to the inconvenience of sticky buttons, drifting sticks and jammed triggers. Thus, regular cleanings are imperative in order to prevent these types of malfunctions.

    Don’t Miss: Connect Airpods To Xbox One Controller

    Safely Disassemble Your Xbox One Controller For Easy Fixes

    The Xbox One controller is generally accepted as one of the best video game controllers around, but they still break down and need repairs from time to time. While you can take apart an Xbox One controller without too much trouble, there are a few potential snags to be aware of, and you’ll also need a couple specialized tools that you may not already have laying around.

    To Help Keep Your Xbox One Fan Clean:

    HOW TO TAKE APART XBOX ONE S (TO CLEAN OR FIX)
    • Use a can of compressed air to blast dust and dirt out of the air vents.
    • Once you’ve cleaned the vents, be sure to position your Xbox somewhere with good airflow to assist with cooling.
    • Clean your Xbox One console every three to six months to make sure it works like it should.
    • Give your Xbox the high groundâplace it somewhere off the floor and in the open rather than on a rug or inside a cabinetâto prevent heavy dust buildup. And keep it away from pets and small children that can cause messes or damage.

    If cleaning out the vents doesn’t do the trick, we recommend calling in professional help to clean your Xbox One fan as it will require opening your console, which could easily lead to damage. Stop by the nearest uBreakiFix by Asurion for help with all of your Xbox repairs as soon as same day.

    Recommended Reading: How To Take Off Parental Controls On Xbox

    Repair The Xbox One Controller Thumbstick

    Various repairs can be performed once the Xbox One controller is open. Unresponsive buttons can be checked and thumbsticks repaired.

    The Xbox One controller is prone to thumbsticks coming loose. In most cases this problem can be resolved by gluing a small pole of metal—perhaps from a thumbtack—into the thumbstick itself and pushing this into the analogue controller mounted on the circuit board.

    How Much Does It Cost To Repair An Xbox One S

    Average Reported Cost: $148.

    in addition, Does GameStop repair Xbox One controllers?

    We can fix it! Just bring your eligible products into any GameStop store and well take care of the rest.

    Also, How do I talk to Xbox people?

    Double-click on a friends gamertag to start a conversation, or right-click for advanced options . To connect with someone in the community, select the search box, then type a gamertag or something similar.

    in the same way How long is Xbox warranty? Xbox One S warranty information

    Your Xbox One S comes with a 24-month warranty with Microsoft. When your Xbox is on its way, well send you an email keep an eye out for the email as it will also include the warranty details. Youll also get a warranty insert with the actual Xbox itself when it arrives.

    How long do Xbox repairs take?

    After your console or sensor has been received at our service center, the average time of service is 14 to 21 days, including shipping time. To check your order status at any time: Sign in to Device services. Select the device associated with your service request.

    Table des matières

  • Select Request a call from Support.
  • You May Like: How To Change The Screen Size On Xbox One

    More articles

    Popular Articles