Thursday, September 29, 2022

How To Take Apart Xbox One Elite Controller

Don't Miss

Performing Xbox One Controller Repairs

Xbox One Elite Controller Disassembly (Full)

Once you have successfully taken apart your Xbox One controller, you can attempt to make repairs. Some problems can be fixed by simply cleaning components, while other issues require you to replace components. In some cases, advanced skills like soldering are required to remove and replace components. Depending on your experience level, some of those repairs are better left to the professionals.

Other fixes are much simpler, like repairing or replacing the d-pad ring. If your d-pad isn’t responding correctly, try this quick fix:

  • Use a prying tool or tweezers to carefully pop off the spring steel d-pad ring.

  • Carefully lift up the arms on the d-pad ring so that they apply more pressure, and reassemble. If that doesn’t fix your problem, you may need a new d-pad ring.

  • Safely Disassemble Your Xbox One Controller For Easy Fixes

    The Xbox One controller is generally accepted as one of the best video game controllers around, but they still break down and need repairs from time to time. While you can take apart an Xbox One controller without too much trouble, there are a few potential snags to be aware of, and you’ll also need a couple specialized tools that you may not already have laying around.

    How To Take Apart Xbox One Elite Controller

    bestbuy.com – Photo by bestbuy.com

    If you own the Xbox One Elite console instead, youll notice that the controller is different from the standard one. Now if you want to know how to take apart Xbox One controller of this series, then follow these steps:

    1. Prepare Soldering Iro, iFixit Opening Tools, T6 Torx Screwdriver, and T8 Torx Screwdriver along with the controller.

    2. Remove the side panels with a pry tool.

    3. Remove the 5 Torx Security Bit screws.

    4. Pop the back panel off by prying the panel next to the 3.5mm port.

    5. Carefully remove the ribbon so that you wont rip the ribbon cable. You can pop the connector up to remove the ribbon easily.

    6. Screws on controller motherboard by removing the 2 Torx screws.

    7. Desolder wires from motherboard. Do it to the 4 wires on each side, these control the vibrations and the RT LT.

    8. Remove the motherboard by pulling up from the “top” side of the controller on the sister board.

    9. Remove the Home Button Cover. Be careful not to lose the sync button. Do so by prying the middle section up from the home button side. Note that this will also remove the LB and RB which is a single part.

    10. Remove the controller daughterboard by unscrewing the 6 Torx screws.

    11. Youve successfully dissembled your Xbox One Elite Controller.

    Read Also: How To Eject A Game From Xbox One

    Repair The Xbox One Controller Thumbstick

    Various repairs can be performed once the Xbox One controller is open. Unresponsive buttons can be checked and thumbsticks repaired.

    The Xbox One controller is prone to thumbsticks coming loose. In most cases this problem can be resolved by gluing a small pole of metal—perhaps from a thumbtack—into the thumbstick itself and pushing this into the analogue controller mounted on the circuit board.

    Clean Your Xbox One Controller

    How To Take Apart Xbox One Controller

    Keeping your controller clean is highly recommended, whatever the circumstances. From hygiene steps to manage infection control to keeping the Xbox One controller buttons responsive, cleaning is important.

    Microsoft recommends isopropyl alcohol for cleaning dirt use cotton swabs to clean difficult to reach areas. Most cleaning will take place around the plastic components. If you have a small vacuum cleaner, suitable for electronics, use this to collect any loose dirt that falls out of reach.

    Once reassembled, use disinfectant wipes to deal with infection risks.

    Don’t Miss: How To Turn On An Xbox 360 Controller

    What You Will Need To Disassemble Your Xbox One Controller

    Opening an Xbox One controller isn’t as easy as cracking open an old radio. You can’t use standard screwdrivers to get inside an Xbox One controller. Instead, you’ll need a Torx screwdriver—and that’s not all:

    • Torx screwdriver
    • Flathead screwdriver
    • Plastic prying tools
    • Plastic spudger or disposable knife

    Don’t have all the tools needed to gain access to your Xbox One controller’s interior? Worry not—various Xbox One controller tool kits can be bought online.

    How To Take Apart An Xbox One Controller

    gamestop.com – Photo by gamestop.com

    To understand how to take apart Xbox One controller, we provide you with the tutorial below which is easy to follow!

    1. First, we need to prepare the necessary items: T6 T8 T10 Screwdriver Kit, and of course, Xbox One controller.

    2. You can work on a tray to prevent screws or other parts from falling on the floor or getting lost.

    3. Take the orange pry tool from your tool kit.

    4. Slide the pry tool between the plastic seam on the grips.

    5. Lever the grip away from the main controller body. Note that there is also adhesive holding it in place under the plastic, so don’t be afraid of applying some force.

    6. Repeat this for both grips.

    7. Next, we’ll remove the screws. Once the screws are removed, your Xbox controller will come apart like a sandwich. Be extremely careful because if you pull it apart too hard, you may damage the cable that connects the battery to the circuitry.

    8. Find your T8 screwdriver from your kit, and begin removing the five security screws. One of the screws is hidden behind the sticker in your battery housing.

    9. Now, you can take a look at the inner workings of your gamepad.

    Recommended Reading: How To Delete Profiles Off Xbox 360

    How To Take Apart Your Xbox One Controller

    Whether you want to customise, tear it down, or replace a thumbstick, you need to know how to open your Xbox One controller

    We put the Xbox One controller through a lot. Compatible with several devices as well as the Xbox One, this controller gets banged, dropped, and grimy. Hand grease, sweat, food, and other detritus can be found over the surface and in nooks and crannies.

    Then there’s issues with the feedback motors, buttons, and thumb sticks. In short, your Xbox One controller needs looking after. To do this, you need to know how to take apart the Xbox One controller, clean it, repair it, and reassemble it.

    How To Cancel Origin Access Account Subscription

    Xbox Elite Series 2 Controller | Take Apart & Fix

    There is a very simple and easy to follow method for you to follow in order to learn how to take apart Xbox One controllers and then put them back together again.It really does not take long at all and you will find that it is actually much safer to take this route rather than trying to take apart the pieces on your own.If you follow the simple steps below then you will be able to successfully complete the task of how to take apart Xbox One controllers.

    You May Like: How To Broadcast On Xbox One Twitch

    How To Take Apart Xbox One Controller: A Simple Tutorial

    Tripboba.com – You may often experience inconvenient things like a stuck joystick or unruly d-pad on your Xbox One controller. This is usually where you start to wonder how to take apart Xbox One controller to fix it so that you can enjoy your games like usual.

    So if you want to disassemble an Xbox One controller either to fix or clean the stick, here’s how you can go about it quickly and easily.

    Four Reasons To Take Apart An Xbox One Controller

    Your Xbox One controller gets a lot of action. As a result, it needs to be regularly maintained. Beyond occasionally wiping the buttons clean, you probably don’t do this.

    However, maintenance to ensure long term performance from the controller requires you need to know how to safely take the Xbox One controller apart. This might be to:

  • Repair or replace a thumbstick
  • Repair or replace a button or trigger
  • Check battery connections
  • Clean any dirt that has accumulated around the controls
  • Keep reading to learn how to open your Xbox One controller for cleaning and repairs. Note that these steps are specifically for Microsoft-produced Xbox One and Xbox One S controllers rather than later or third party devices. If you have a third-party Xbox One controller, these typically feature eight screws than can be removed with a small Philips screwdriver.

    Having said that, you can use this guide to open a first generation Xbox Series X/S controller.

    Recommended Reading: How To Change Xbox Name On App

    Reassemble An Xbox One Controller

    When you’re satisfied the Xbox One Controller is ready to use again, simply follow the instructions above in reverse to reassemble the device.

    Whether you’ve cleaned it or made a repair, once reassembled your Xbox One controller should be working as normal once again. If not, consider buying a replacement controller, or looking at other troubleshooting steps.

    Xbox One Controller Parts Diagram

    How to Take Apart an Xbox One Controller for Painting ...

    Xbox one wireless controller xbox one wireless controller xbox one s teardown ifixit get to know your xbox series x s

    Get To Know Your Xbox One Wireless Controller Support

    Get To Know Your Xbox One Wireless Controller Support

    Xbox One S Teardown Ifixit

    Get To Know Your Xbox Series X S Wireless Controller Support

    Get To Know Your Xbox One Wireless Controller Support

    Get To Know Your Xbox Elite Wireless Controller Series 2 Support

    How To Take Apart Xbox One Controller You

    Microsoft Rumored To Unveil Redesigned Xbox One Controller At E3 2017 Tweaktown

    Xbox One Elite Controller Model 1698 Disassembly Ifixit Repair Guide

    Scuf Infinity1 The Wait Is Over Now Available To Order Gaming

    Xbox One Controller Parts Diagram Wiring Site Resource

    Xbox One Controller Dimensions Drawings Com

    Xbox One Hardware And Software Specs Detailed Analyzed Extremetech

    Xbox One Controller Dimensions Drawings Com

    Xbox One Wireless Controller 1697 Lt Rt Magnet Adjustment Ifixit Repair Guide

    Xbox One Wireless Controller Ifixit

    Teardown Xbox 360 Usb Controller

    Xbox 360 Wired And Wireless Controllers Support

    Xbox One Wireless Controller Teardown Ifixit

    Joystick Controller Pcb And Wiring

    New Ps4 Controller Revealed With Customizable Features

    Teardown Xbox 360 Usb Controller

    Xbox 360 Controller Dimensions Drawings Com

    Inertia Microphone Cerebrum Xbox One Controller Circuit Diagram Junaily Com

    Razer Wolverine Ultimate Rz06 02250 Support

    Teardown Xbox 360 Usb Controller

    Support The Elder Scrolls Online

    Also Check: How To Change Your Real Name On Xbox App

    Fully Teardown Your Xbox One Controller

    Want to know more about how your Xbox One controller works? Consider a full teardown, stripping the device down to just the PCBs. You might even take this a step further and detach the triggers, thumbsticks, buttons, and more.

    Be aware that a further teardown will expose electrical components. As such, you will need to take precautions to deal with the risk of static electricity damaging your controller.

    Going further, four thin wires can be found on the left and right side of the controller . Two wires on each side are for the rumble motor, while the other four connect the two PCBs. These can be de-soldered with care, but this is only really necessary if you’re stripping it down for replacement components.

    Related: Best Soldering Irons for Beginners

    The PCBs, meanwhile, can be detached from the interior plastic chassis by removing four small screws.

    Take care labelling and annotating the procedure, however, or else you’ll end up with a controller you can’t play with!

    How To Take Apart Xbox One Controller Without Torx

    ifixit.com – Photo by ifixit.com

    Dissembling your Xbox One controller with Torx screwdriver may be the best option since its fairly easy to use. But if by chance you have none at home and still you need to fix that irksome unruly buttons on your controller ASAP, there is an alternative way.

    Follow the tutorial below to know how to take apart Xbox One controller without using a special driver.

    1. Prepare a 2mm slotted driver, preferrably electronics grade.

    2. Get your two millimeter slotted bit , there are seven screws including the hidden bonus screw.

    3. Wedge the screwdriver and you can unscrew them easily. Note that you have to unscrew all of them, or it wont come apart.

    4. Youve successfully taken apart Xbox One controller without using the special screwdriver!

    The good news is that you dont have to modify the screws, screwdriver, or go searching for a custom screwdriver to perform this tutorial on how to take apart Xbox One controller!

    Now thats all on how to take apart Xbox One controller, hope it helps!

    Don’t Miss: How To Connect Xbox To Hotspot

    Why Take Apart An Xbox One Controller

    If your Xbox One controller isn’t working right, and you’ve already and gone through some basic troubleshooting like checking the batteries, the next step is usually going to be taking the controller apart.

    Here are some fixes that require taking apart your Xbox One controller, including advice on what to do after you’ve opened the controller up:

    • Malfunctioning d-pad: Carefully pry up the tabs on the spring assembly so it pushes down with more force. Replace if necessary.
    • Drifting analog sticks: Clean or replace the analog stick units as necessary.
    • Inoperable audio jack: Verify that the jack is properly seated and making contact, and replace if necessary.
    • Sticking buttons: Use canned air and other methods to remove gunk and other buildup after removing the circuit board assembly from the controller housing.

    How To Take Apart A Microsoft Xbox One Controller

    Xbox One Elite Controller Disassembly

    The process for opening the Xbox One controller is straightforward with the right tools.

    • Remove the battery cover and any batteries
    • Remove the grip plastic
    • Unscrew the five Torx screws
    • Lift the rear cover from the controller
    • Lift the internals away from the front fascia

    Below we’ll go through the steps in more detail. Note that opening a first generation Xbox Series X/S controller follows the same procedure.

    Also Check: Remove Parental Control Xbox 360

    How To Take Apart Xbox One Controller Complete Guide

    How to take apart the Xbox One controller can be a very confusing task for people who do not know exactly what they are doing. With so many different kinds of Xbox Ones that you can choose from, you really need to know how to remove them before you can start using them again.

    The Xbox One controller is made up of two main pieces. The first piece is called the transmitter and the second is called the receiver. Both of these parts need to be taken apart properly before you are going to be able to put them back together again.If you do not take these two pieces apart properly then there are a lot of problems that you will encounter when you try to put them back together. If you make the mistake of trying to remove the transmitter by yourself then you will find that it will be difficult for you to do it correctly. You will also find that it will be quite dangerous if you take this route as well because you could possibly break a bone when you try to take the pieces apart.

    How To Open The Xbox One Or Xbox Series X/s Controller

    Before proceeding, ensure your Xbox One controller is powered off. Place it on a table or similar hard surface with the tools within easy reach.

    Follow these steps to open the Xbox One controller.

  • Remove the door to the battery compartment and set it aside.
  • Remove the batteries, saving them for later.
  • Using the plectrum or spudger, detach the plastic panels on the back of the controller’s “handles” where the controller sits in your hand. This can take a while, so take your time patiently wiggling the plectrum along each edge to unclip them.
  • With the controller face down, unscrew the five Torx screws. You’ll find two on the left, two on the right, and another beneath the label in the battery compartment. Put the screws aside safely for later.
  • The back panel should now simply lift off.
  • You can now lift out the main controller. Notice how this is a secondary plastic case, which houses a pair of PCBs .
  • At this stage you can now replace thumbsticks, D-pad, and the other buttons if you’re planning on some customizations.
  • Further disassembly at this stage requires some electronics knowledge so don’t proceed if you’re inexperienced with PCBs and electrical components .

    Congratulations—you’ve successfully taken apart your Xbox One controller.

    Read Also: How To Set As Home Xbox

    More articles

    Popular Articles

    How To Stream Xbox To Discord

    How To Hack Xbox 360