Tuesday, August 9, 2022

How To Take Apart Xbox One Controller Without Torx

Don't Miss

How To Disassemble Xbox One Controller Easily

How to Take Apart Xbox One Controller & Assemble (No Torx Needed)

The Xbox has been in high demand for the past decade. Microsoft had introduced this game back in 2001, and since then, it has become the dream of every child to own the Xbox. After the lockdown, especially, it has been one of the highly purchased online gaming platforms. In this article, we will discuss how to disassemble the xbox one controller

There are five versions of Xbox. Each has unique features that make it stand out.

You might sometimes face some issues when it comes to taking care of your Xbox. If you use it excessively, there is a chance that it will get spoilt. Apart from that, there is a shell-life of electronics, so if you are facing issues even when you use the controller properly, you do not have to worry.

This issue is always solvable, provided you follow the procedure. This article will help you to comprehend how to disassemble the xbox one controller straightforwardly. Make sure that you spend enough time understanding the technique. This will help you to perform it in a better way.

How To Take Apart An Xbox One Controller Without A Torx

Jan 23, 2020 The truth is, like 7 seven out 10 Xbox controllers will break when dropped as they are pretty weak. But what is the controller fell

Mar 19, 2021 How to take apart Xbox one controller now to know just how exactly to take-apart x-box One control, we offer you all the tutorials that can

How to take apart a xbox controller without a security screwdriver. Saved by jason maxwell. 4. Xbox One ControllerTake Apart. More information.

Fosmon Game Controller Console 7 Pieces Tool Repair Kit

Free 2-day shipping. Buy Fosmon Game Controller Console 7 Pieces Tool Repair Kit, Magnetic T6 T8 T10 Screwdriver Set for Xbox 360 Xbox One Controller and Rating: 4.7 · 3 reviews · $9.99 · In stock

Dec 15, 2020 Learn how to disassemble Xbox One controller without the help of any professional at your own home and clean or repair joystick.

Recommended Reading: Connect Xbox One Controller To Nintendo Switch

Performing Xbox One Controller Repairs

Once you have successfully taken apart your Xbox One controller, you can attempt to make repairs. Some problems can be fixed by simply cleaning components, while other issues require you to replace components. In some cases, advanced skills like soldering are required to remove and replace components. Depending on your experience level, some of those repairs are better left to the professionals.

Other fixes are much simpler, like repairing or replacing the d-pad ring. If your d-pad isn’t responding correctly, try this quick fix:

  • Use a prying tool or tweezers to carefully pop off the spring steel d-pad ring.

  • Carefully lift up the arms on the d-pad ring so that they apply more pressure, and reassemble. If that doesn’t fix your problem, you may need a new d-pad ring.

  • How Do I Open An Xbox One Controller Without Torx Quora

    How To Take Xbox One Controller Apart Without Torx

    2 answersI have taken apart quite a few Xbox controllers without any Torx bits so I feel qualified to answer. The Xbox controller uses what are called #6

    Mar 28, 2021 Youll need to remove the handle covers. Depress one of the triggers and use the opening to wedge your plastic pry tool into the controller. Don

    Nov 10, 2020 Here is how you take apart an Xbox Series X controller. Image via Microsoft. First, you are going to need to remove the textured grips from

    Recommended Reading: How To Take Off Parental Controls On Xbox

    How To Disassemble Xbox One Controller

    Xbox is the most widley used platform to play games online. The Wireless Xbox Controller is the most common game controller for the Xbox One and Xbox Series X/S domestic video game consoles. Its also sold for use in Windows-based total computers and is compatible with various operating systems, including macOS, Linux, iOS, and Android. As a result, it is widely recognized as one of the best online gaming controllers available. It does, however, degrade and require repair from time to time. So one needs to learn how to disassemble Xbox One controller.

    This article will help you to learn how to disassemble Xbox Controller easily with two different methods.

    Contents

  • 4 Conclusion
  • How To Take Apart Xbox One Elite Controller

    bestbuy.com – Photo by bestbuy.com

    If you own the Xbox One Elite console instead, youll notice that the controller is different from the standard one. Now if you want to know how to take apart Xbox One controller of this series, then follow these steps:

    1. Prepare Soldering Iro, iFixit Opening Tools, T6 Torx Screwdriver, and T8 Torx Screwdriver along with the controller.

    2. Remove the side panels with a pry tool.

    3. Remove the 5 Torx Security Bit screws.

    4. Pop the back panel off by prying the panel next to the 3.5mm port.

    5. Carefully remove the ribbon so that you wont rip the ribbon cable. You can pop the connector up to remove the ribbon easily.

    6. Screws on controller motherboard by removing the 2 Torx screws.

    7. Desolder wires from motherboard. Do it to the 4 wires on each side, these control the vibrations and the RT LT.

    8. Remove the motherboard by pulling up from the “top” side of the controller on the sister board.

    9. Remove the Home Button Cover. Be careful not to lose the sync button. Do so by prying the middle section up from the home button side. Note that this will also remove the LB and RB which is a single part.

    10. Remove the controller daughterboard by unscrewing the 6 Torx screws.

    11. Youve successfully dissembled your Xbox One Elite Controller.

    You May Like: How To Get Mods On Gta Xbox One

    How To Open/disassemble An Xbox One Controller

    What screwdriver Do you need to open a Xbox controller?

    To open an Xbox controller, you need a Torx T8 screwdriver.

    How do I get a stripped screw out of my Xbox controller?

    There are a few ways to get a stripped screw out of your Xbox controller. One way is to use a drill bit to drill into the screw. Once the drill bit has made a hole in the screw, use a screwdriver to remove it. Another way is to use a hacksaw to cut into the screw. If you have a vise grip, you can also use that to remove the screw.

    How do you unscrew Xbox One screws?

    There are special screws that come with the Xbox One that are designed to be unscrewed using a specific tool. If you dont have the tool, you can try using a thin metal object like a butter knife or a small screwdriver, but its likely that youll damage the screws in the process.

    What is a T10 screwdriver?

    A T10 screwdriver is a type of screwdriver with a 10 mm blade. It is used to tighten or loosen screws with a T10 head, which are common in many electronic devices.

    What can I use if I dont have a Torx screwdriver?

    You can use a regular screwdriver if you have the right size bit. You can also try using a drill or a power drill with a bit that is the same size as the Torx screw.

    How do you pop an Xbox One controller open?

    To pop an Xbox One controller open, youll need a small flathead screwdriver. With the controller facing down, insert the screwdriver into the hole on the back of the controller and twist to pop the cover off.

    What You Need To Disassemble Your Xbox One Controller

    How to Open an Xbox One Controller WITHOUT Torx Screwdrivers

    While its fairly straightforward to take apart an Xbox One controller, you still need tools that you might not readily have at your disposal. Below is the list of equipment you need to take your controller apart:

  • T-8 Safety Torx screwdriver
  • Flathead screwdriver
  • Plastic spudger or guitar pick
  • You even have the option to purchase an Xbox One controller tool kit online, if you dont want to gather each of the tools yourself.

    Also Check: Gta Online Mod Menu Xbox One

    Why Take Apart An Xbox One Controller

    If your Xbox One controller isn’t working right, and you’ve already and gone through some basic troubleshooting like checking the batteries, the next step is usually going to be taking the controller apart.

    Here are some fixes that require taking apart your Xbox One controller, including advice on what to do after you’ve opened the controller up:

    • Malfunctioning d-pad: Carefully pry up the tabs on the spring assembly so it pushes down with more force. Replace if necessary.
    • Drifting analog sticks: Clean or replace the analog stick units as necessary.
    • Inoperable audio jack: Verify that the jack is properly seated and making contact, and replace if necessary.
    • Sticking buttons: Use canned air and other methods to remove gunk and other buildup after removing the circuit board assembly from the controller housing.

    Remove The Face Plate And Back Cover Of Controllers

  • After unscrewing all the screws, the controller will come apart. Turn your controller, give a little shake, tap all the screws out and lift out the face plate carefully .
  • Next, flip the controller again and remove the back plate. Just be careful that you dont catch any wires.
  • You now have access to the rumble motors, triggers, and some additional screws that you can leave alone unless you need to replace specific components on the circuit board. To access most of the other components, remove the assembly from the front case and flip it around.

  • Now from the front side, you can clean the buttons, analog sticks, remove the analog sticks, remove the d-pad ring and d-pad, and more.
  • In this way we can easily take apart Xbox one controller for cleaning and repairing. Use the professional or normal screwdriver and follow the above steps very gently. To reassemble the controller, simply reverse all these steps again. Place the controller assembly back in the front case, close the rear case, tight again all screws and then cover the grip covers and battery cover back into place.

    Dissembling the Xbox One controller with Torx screwdriver may be the best option because its really easy to use. But if the Torx screwdriver is not available at your home and still you need to fix the controller ASAP, use the normal screwdriver for the same purpose.

    READ MORE : Watch Netflix On Nintendo Switch Gaming Console

    Don’t Miss: Do Xbox 360 Play Blu Ray

    Is Teardown Free On Xbox

    No, Teardown isnt coming to Xbox One. Theres no Teardown Xbox One release date to look forward to, though the game may make its way to Xbox Series X in the future. Developer Tuxedo Lads stated on Twitter that Teardown would most likely run fine on Xbox Series X.30-Oct-2020

    I went to Teardown Mobile, which is currently the leading seller on steams list.

    S To Take Apart Your Xbox One Controller

    How To Take Apart Xbox One S Controller Without Torx

    Before you begin the process, ensure youve disconnected all cables from the controller and taken out the batteries from the battery compartment. Place your Xbox One controller on a flat surface with ample space, ideally a decently sized table.

    You can now follow the steps below to take apart your Xbox One controller:

  • Use a plastic spudger to pry open the right and left grip covers. These are the panels covering the handles of the controller. Use the spudger to patiently wiggle the panels loose so they can come apart.
  • Next, remove the cover from the battery compartment. If youre trying to open your controller for the first time, the battery compartment will have a sticker inside. Use your Torx bit to cut away at the center of the sticker to reveal the screen beneath it.
  • Now, remove the five screws, including the battery compartment screw as shown in the image, with your T8 security Torx screwdriver.
  • Your backplate should now come apart easily. Remove the backplate and place it carefully along with the removed screws.
  • You can now see the triggers, rumble motors, and other components on the PCB that you can leave untouched for now.
  • 6. Similarly, lift and remove the faceplate and place it carefully aside. You now have access to the D-pad, analog sticks, and all the buttons.

  • You can follow the steps above in reverse order to put everything back together when youre finished.
  • Congratulations, you have now learned how to take apart and reassemble your Xbox One controller.

    Don’t Miss: How To Get Gta 5 Mods On Xbox One

    How To Take Apart Xbox One Controller

    This article discloses how to dismantle a Take Apart Xbox One Controller assuming it needs fixes, remembering expected tangles and concentrated devices youll require. Xbox One are by and large acknowledged as one of the best computer game controllers around, yet they actually separate every once in a while.

    We put the Xbox One controller through a ton. Viable with a few gadgets just as the Xbox One, this controller gets banged, dropped, and dirty. Hours Played on PS4, sweat, food, and other waste can be found over the surface and in little hiding spots.

    Then, at that point, theres issues with the input engines, fastens, and thumb sticks. To put it plainly, your Xbox One controller needs taking care of. To do this, you really want to know how to dismantle the controller, clean it, fix it, and reassemble it.

    You may frequently encounter badly arranged things like a stuck joystick or uncontrollable d-cushion on your Xbox One controller. This is generally where you begin to consider how to to fix it with the goal that you can partake in your games like regular. So to dismantle a Xbox One either to fix or clean the stick, this is the way you can go with regards to it rapidly and without any problem.

    It is exceptionally regular and disturbing that one of your controls stalled out or quits working. More often than not, it is the D-Pad causing the issue. Also sending the Xbox One back to the Customer support for fixing/substitution will set aside time.

    What You Will Need To Disassemble Your Xbox One

    Opening a Xbox One controller isnt quite so natural as airing out an old radio. You cant utilize standard screwdrivers to get inside a controller. All things considered, youll need a Torx screwdriver- and that is not all:

    • Torx screwdriver
    • Flathead screwdriver
    • Plastic prying apparatuses
    • Plastic spudger or expendable blade

    Try not to have every one of the instruments expected to get sufficiently close to your Xbox One inside? Stress not- different Xbox One controller toolboxs can be purchased on the web.

    You May Like: Set Home Xbox

    S To Take Apart Xbox One Controller:

    First, you must arrange for the necessary tools like the T6T8T10 Screwdriver kit and Xbox One Controller. Having a tray while working is good as you can avoid screws or other smaller tools dropping on the floor, which sometimes can miss. Follow the below-given steps to take apart the Xbox One Controller.

    1- Remove the orange pry tool from the tool kit, which helps to discard the handle covers of the controller.

    2- You should slide the pry tool connecting the plastic seam on the grips.

    3- Hold the grip properly away from the central controller body. You can get only sticky holding beneath the plastic, giving a light force on it without destroying the internal parts.

    4- Repeat the same thing for both the grips.

    5- Now, you can remove the screws to take apart your Xbox Controller. Be cautious while removing it without destroying the wires as connected between battery and circuit.

    6- With the help of a T8 screwdriver, take out the five security screws. Also, check whether you have an unscrewed screw beyond the sticker in the battery housing.

    Method-2

    How To Take Apart Xbox One Controller: A Simple Tutorial

    How To Open/Disassemble an Xbox One Controller (Without Torx Screwdriver) (Part 1)

    Tripboba.com – You may often experience inconvenient things like a stuck joystick or unruly d-pad on your Xbox One controller. This is usually where you start to wonder how to take apart Xbox One controller to fix it so that you can enjoy your games like usual.

    So if you want to disassemble an Xbox One controller either to fix or clean the stick, here’s how you can go about it quickly and easily.

    Also Check: Gta 5 Mod Menu Xbox One Download

    S To Take Apart Xbox One Controller Without Torx:

    Removing your Xbox One Controller using a Torx screwdriver is a fantastic choice, but if you dont have that when you need it, you are supposed to follow the other alternative ways, which are given in the following steps.

    1- First, arrange for the necessary tools like a 2mm turnscrew with an electronics level with seven screws and one hidden screw.

    2- Now, insert the screwdriver to take out the screw easily. Remove all the screws. Only then can you take apart the Xbox One Controller.

    Reassemble An Xbox One Controller

    At the point when youre fulfilled the Take Apart Xbox One Controller is prepared to utilize once more, essentially adhere to the directions above in converse to reassemble the gadget.

    Regardless of whether youve cleaned it or made a maintenance, once reassembled your ought to be functioning as would be expected by and by. If not, think about purchasing a substitution controller, or taking a gander at other investigating steps.

    See More Related

    You May Like: How To Boot Offline Xbox

    Tools For Taking Apart An Xbox One Controller

    Before going to take apart and disassemble an Xbox One controller, choose the clean and clear workspace at your home. It will help you to prevent screws or other parts from falling on the floor or getting lost. After that, try to arrange some tools for disassembling your Xbox one controller. Otherwise, its not possible for you.

    According to the Google search quarries, some users want to know how to how to take apart xbox one controller without screwdriver or how to open xbox one controller without torx. But believe me guys, dont go for teardown of your Xbox one controller without having the proper tools.

    • Screwdriver or T-8 safety Torx : If you are ready to tear down your Xbox One controller at your own home, use a Torx bit in a driver or use a dedicated Torx driver but it has to be a T-8 safety Torx. Its because a regular T-8 Torx will not fit into the Xbox One controller screws.
    • Prying tool : Use the professional paying tool or anything that is enough to fit inside the gap of the controller housing and the end covers. Alternatively, you can use the ATM card or visiting card or SIM card etc.

    More articles

    Popular Articles