Saturday, February 4, 2023

How To Sync Xbox One Controller Without Sync Button

Don't Miss

Controller Or Console Bug

Sync Xbox Controller Without Using the Sync Button

Just like any electronic device, both the controller and Xbox One console may encounter random bugs that may hinder a connection from working normally. If your controller was working with your Xbox One console normally previously, it may have developed a connection glitch. Such bug may or may not go away easily depending on the issue.

Posts you might like

Power Cycle Your Console

Power cycling your console means fully rebooting the console. It can fix some corruption issues in your console as well as your controller connection. To power cycle the console:

1) Press and hold the Xbox button on the console until it completely shuts down.

2) Press the Xbox button to turn on your console.

3) Check and see if your controller can connect to the console.

What To Do When Your Xbox One Sync Button Stops Working

Unlike Xbox 360 controllers, Xbox One controllers use Bluetooth. This allows them to be compatible with the ever-popular Xbox Series X. However, this also means that you may run into pairing issues. Usually, when the Xbox One controller experiences any connectivity issues, it will start flashing and disconnecting.

However, there are rare occasions when your Xbox-One controller will simply refuse to sync/pair without any indication of what is causing the issue. This may lead you to believe that there is something wrong with the Xboxs sync button.

However, just because your controller seems to be fine, doesnt mean it is. Thus, in order to ascertain the cause behind your sync problems, we first need to confirm that its not actually controller-related.

Thus, essentially, we need to figure out which point in the connection is malfunctioning. Is the issue related to your controller or the actual console sync button? So in this guide, well explore troubleshooting methods that address both issues.

Also Check: Using Xbox One Controller On Switch

How To Sync The Xbox One Controller

KommandoTech earns commission via affiliate programs, meaning we may earn a fee when you click on our linkand decide to purchase a product. However, every review we commit to is unbiased, objective, and producedbefore we ever join a company’s affiliate program.

Youve just bought a brand new Xbox console or got one as a present, and youre impatient to try it out, but theres one problem: How do you sync an Xbox controller with the console? And to add to the headache, you have no idea how to connect it to your PC either. Dont worry it isnt that difficult at all.

How To Sync Xbox One Controller Via Bluetooth

How to Sync an Xbox One Controller With Your Console

Besides the above two ways to connect Xbox One Controller, you can also choose to sync Xbox One controller via Bluetooth.

Now, here is the tutorial.

1. Hold the Guide button down on the controller to turn it on.

2. Hold the Pairing button on the controller for three seconds until the Guide button flashes.

3. Open your computer, and go to Settings > Devices> Bluetooth & other devices.

4. Then choose Add a Bluetooth device.

5. In the pop-up window, click Add Bluetooth or other device.

6. Then select Bluetooth.

7. Next, click Xbox Wireless Controller.

8. Then wait until the guide button is solid white.

After that, you have successfully synced Xbox One controller to your computer and you can play with it.

Related article: 3 Simple Ways to Connect Xbox One Controller to a Windows PC

Don’t Miss: Gta V Police Mod Xbox One

Update Your Xbox One Controller

1. Connect your Xbox One Controller using the USB cable.

2. Press the Menu button.

3. Go to Settings.

4. Select Devices & Streaming on the menu.

5. And then over to Accessories.

6. Click the three dots below Configure button.

7. Select the Firmware version on the next screen.

8. Now, hit the Update button.

Restart Your Xbox Console

This might be an obvious one but a simple reboot of the Xbox console, which often solves most of the minor problems. Simply power down your console by pressing down the Xbox button and wait about 10 seconds before you restart it again. Once it is booted up again, try to reconnect your controller with the sync button again.

Recommended Reading: How To Have A Custom Gamerpic On Xbox One

How To Connect Or Sync An Xbox One Controller

If you’re setting up a new Xbox One or just connecting a new controller, you need to make sure your controller is synced. It’s kind of hard to move forward without this process, so here’s what you need to set things up!

× 1

Howchoo is reader-supported. As an Amazon Associate, we may earn a small affiliate commission at no cost to you when you buy through our links.

Syncing With Xbox 360

How To Sync/Connect An Xbox One Controller Without Kinect – Or With Kinect – 2 Ways –
  • 1Power on the Xbox 360 gaming console.
  • 2Verify that your wireless Xbox controller contains batteries.
  • 3Press and hold down the Xbox button on your controller to power on the controller.
  • 4Press and release the connect button on your Xbox 360 console. On the 360 E and 360 S consoles, the connect button is located below and to the right of the power button. On the original Xbox console, the connect button is a small, round button located to the left of the power button.
  • 5Press and release the connect button on the controller within 20 seconds of pressing the connect button on the Xbox 360 console. Your controllers connect button is located at the top left side of the controller.
  • 6Wait for the controller to automatically connect to your Xbox 360. The lights on your controller will stop flashing after the controller has been successfully synced with your Xbox 360. Advertisement
  • Recommended Reading: Change Gamertag On Xbox App

    How To Use An Xbox One Controller On Xbox Series X Or S

    If you want to start playing games using your Gamertag profile, youll need to make sure the Xbox Series X|S knows that its you holding the controller. You’ll need to assign it to your profile, especially if youve already been using a different controller on the console.

    Heres how to set up your Xbox One controller for use on Xbox Series X or S:

  • Make sure that your controller is synced and that you can navigate the dashboard and guide.

  • Press the Xbox button on your controller to open the guide.

  • Navigate to Profile & system> Settings.

  • Navigate to Account> Sign-in, security & passkey.

  • Select This controller signs in.

  • Select LINK CONTROLLER to assign your profile.

  • The Xbox One controller is now connected to your profile.

  • Your controller is ready to use once you have successfully assigned it to your profile, and you can use it in all Xbox, Xbox One, and Xbox Series X or S games. All of the buttons will work as you expect. The only difference is that you need to press the Xbox button to open the guide if you want to take screenshots or record video, as the Xbox One controller lacks a share button.

    Xbox One Controllers Vs Series X

    Xbox One controllers and Xbox Series X|S controllers look remarkably similar, but they actually have some pretty different guts inside. Despite those differences, Microsoft made it so that you can sync an Xbox One controller with an Xbox Series X or S and use it to play next-gen games, and there arent even any hoops to jump through or adapters to buy. It just works.

    The Xbox One controller improved on the already decent Xbox 360 controller in almost every way, and the updated version that shipped with the Xbox One S was even better.

    Don’t Miss: What Is Packet Loss Xbox

    Check For Range And Interference

    Make sure that the Xbox One controller is in the range of the console. The maximum operated range in 6 meters. It is recommended to use the controller with the 5-meter range. And dont place any other Bluetooth devices in between the console and the controller. Other Bluetooth devices may interrupt the signal.

    Update The Controllers Software To The Latest Version

    How to sync Xbox One controller

    There is a high possibility that your controller may not sync and misbehave if the software is out of date for a long time. Ensure you have updated it to the latest version.

    1) Meanwhile, connect the Xbox controller with a USB cable to fix the Xbox one sync button not working issue.

    2) Launch the Xbox Live app and sign in your credentials and hover to the Menu button and select Settings.

    3) Choose Devices& Accessories next to Power and Setup tab.

    4) Tap on the controllers name you are using and give an Update.

    5) Finally, wait for the update process to complete and check whether this has fixed the issue.

    Like, How to Report a Subreddit on Reddit: 2 Working Way

    Wrapping Up

    In the Xbox gaming console, the Xbox sync button is not working and the end result is that you will lose your game for sure. Also, Sync will stop working suddenly and as the game console is nothing without the controller, you will be very much annoyed by this issue.

    You May Like: Mods Gta V Xbox One

    Can’t Connect Your Xbox One Controller

    The above steps should sync your Xbox controller and console in most cases. But if pairing doesn’t work, try these troubleshooting tips:

    • Try replacing the batteries in the controller. If you use the Xbox One Play and Charge Kit or Xbox Rechargeable Battery attachment, make sure your controller is charged. Confirm that the cable you’re using to connect and charge the controller works properly.
    • Keep the controller close to the console when you sync it. The wireless connection between your console and controller has a range of about 20-30 feet, so it may disconnect if you go further.
    • Turn off any other wireless devices that are close to the Xbox and controller to reduce interference.
    • Fully restart your console by holding the Xbox button on the front of the system for about 10 seconds. Disconnect the console’s power cable for at least 30 seconds, then reconnect it and turn on your system again.
    • Remember that you can only have eight controllers connected to the system at once. If you somehow have this many connected, disconnect a few before connecting another.
    • The Xbox Series X|S controller has a handy feature that lets you switch between using your controller with your Xbox and a connected Bluetooth device. Quickly press the Pair button on your controller twice to switch from a Bluetooth connection back to your Xbox. Hold Pair to put your controller back in pairing mode so you can reconnect it to the Bluetooth device.

    How To Sync And Xbox One Controller

    Syncing your controller means powering it up. Xbox One controllers take AA batteries, but you also can get rechargeable battery packs for them. Either way, make sure your controllers are juiced up before trying to pair them not enough power often is the cause of connectivity issues .

    Step 1: With the Bluetooth controller charged or fresh batteries installed, turn on the device by pressing the Xbox button in the center of it. It will light up to indicate its been turned on. Then hit the Power button on the Xbox console.

    Step 2: To pair your controller to your Xbox One, youll need to activate the connection on both the console and the controller. First, locate the Connection button on the console. On the original Xbox One, youll find that button on the left side of the console, near the disc tray.

    Step 3: On the Xbox One X and Xbox One S, the Connection button is on the bottom right corner of the front of the console, beneath the power button. Pressing the button should trigger the white Xbox logo to start blinking, indicating that the console is searching for a controller signal.

    Step 5: Repeat the process with any other controllers you want to sync to the Xbox, up to eight.

    Recommended Reading: How To Ddos On Xbox 2020

    Turn On The Xbox One Controller

    Turn on the Xbox One controller you want to pair. If the Xbox light is flashing, that means it’s ready to sync with a console. If it doesnt turn on, make sure its fully charged or has a fresh set of batteries.

    Push the connect button on the Xbox One.

    Newer modelsXbox One S and Xbox One Xhave a connect button under the power button on the right side. The original Xbox One connect button is on the left side near the disc slot.

    To put the controller in pairing mode, press and hold the connect button located on top of the controller. The Xbox light will stop flashing when the controller is connected.

    Once your controller has been connected, it’s time for a test! Load up your favorite game and see if you can play.

    Not every Xbox One controller wants to sync properly, here are the most common issues you’ll encounter and what to do.

    Check Your Controller Status

    How to Sync Xbox One Controller Connect and Pair Controller to Console without Kinect or USB Cable

    Before you do anything to your controller, make sure to inspect your controller status to see if it is disconnected from your console. If the controller has a white light, that indicates it is still connected to the console and you should be fine . However, if the controller lights are not up and the console is not responsive to any inputs via the controller then try the following methods to fix it.

    You May Like: How To Clean Xbox One X

    Can I Use Xbox Series X

    You might have noticed that the controller for the Xbox Series X|S is near-identical to the Xbox One controller. As it turns out, Microsoft has baked forward and backward compatibility into these controllers.

    This means that you can use Xbox One controllers on your Xbox Series X or Series S. In addition, you can use Xbox Series X|S controllers on your Xbox One system. This is a handy way to enjoy multiplayer titles on either console, even if you’re a few controllers short.

    Since the controllers are near-identical, you aren’t missing out on anything major by using the older Xbox One controller with an Xbox Series X|S. The Xbox One controller lacks the dedicated button on the new controller, but that’s not essential for gameplay. The only other improvements are better grip textures and an improved D-pad.

    See our guide to using Xbox One controllers on the Xbox Series X|S for more info.

    Causes Of Xbox One Controllers Not Connecting

    Lifewire / Derek Abella

    When an Xbox One controller won’t connect, there are a handful of root problems that may be in play. At the most basic level, your controller and your console aren’t talking to each other. This can be caused by too much distance between them, too much interference, weak batteries, sync issues, and actual hardware failures.

    You May Like: Blizzard Twitch Link

    Faqs About Sync On Xbox

    1. Can You Sync Xbox Controllers Without Button?

    Yes, you can sync your Xbox controller without the sync button with a USB cable. Just insert the end of the cable into the slot of the remote and plug the USB into the port of the console. When the Xbox button on the remote and the console lights up, unplug the controller and you are synced.

    2. How to Sync Xbox One Headset Without Sync Button?

    For Xbox One headsets with wireless adapters:

    • Open the Xbox One > Connect Adapter > Switch on Headset > It should connect automatically.

    For Xbox One headset without wireless adapters:

    • Press Sync on the Xbox One > Hold Power Button on the Headset until it syncs with the console.

    • Or Connect the headset with the console via a USB Cable.

    Test The Xbox One Controller Status

    How to Connect or Sync an Xbox One Controller

    After getting the Xbox one controller syncing problem, you should check the status of your controller to identify the exact issue.

    • At the time of testing, try to keep your wireless controller close enough to the console.
    • Next try to remove additional objects that may interfere in the connection.
    • Check the batteries of your controller and replace them with a new one. Always try to use the fresh new batteries. If the batteries are new and running out of power then charge them and recheck the controller connectivity.
    • If the solid white light is glowing on the controller that means its still connected to the console. Till now, if the controller is not responding then restart it and try to sync again.

    You May Like: Cool Xbox Profile Pics

    What You Can Do If Your Wireless Xbox One Controller Still Wont Sync

    If none of the solutions above help at all, a deeper issue with the controller or with the console may be at play. If another controller syncs fine with the console, then the controller youre having an issue with may have a hardware malfunction. Unfortunately, this means that youll need to replace the controller if you need wireless functionality when gaming.

    If only the wireless functionality of your controller is dead, you may still be able to use it with a USB cable.

    How To Sync A Wireless Xbox One Controller Using A Cable

    Xbox controllers arrive with a Micro-B USB cable, which you can also use to sync them with your console. After you plug one end of the cable into the controllers USB port and the other into the console, press and hold the Xbox button on the controller for a few seconds, and they will automatically sync. Afterward, you can unplug the cable and enjoy playing games wirelessly.

    A bonus of using a cable is that it can also serve as a source of power for the Xbox One controller. You dont even need batteries inside.

    Recommended Reading: What Does Mic Monitoring Do On Xbox One

    How To Use A Wired Xbox One Controller With Xbox Series X Or S

    In the same way that you can connect your Xbox One controller to your Xbox Series X or S wirelessly, you can also use a wired USB connection. The only real difference between the controllers in this respect is that the Xbox One controller has a micro USB port, and the Series X or S controller has a USB C port.

    To connect a wired Xbox One controller to your Xbox Series X or S:

  • Plug a micro USB cable into the Xbox One controller if it doesnt have a permanently connected cable.

  • Plug the other end of the USB cable into a USB port on the Xbox Series X or S.

  • Wait for the controller to connect.

  • More articles

    Popular Articles