If Your Xbox One Controller Keeps Disconnecting
What if your Xbox controller pairs but then keeps disconnecting? This can ruin a great gaming session and is extremely frustrating to deal with.
Do remember that it’s a normal battery-saving feature of the Xbox One controller to disconnect if you don’t use it for 15 minutes. This won’t happen when playing games, but can come into play if you primarily use your Xbox One as a media center.
You’ll need to move a stick or press a button every so often. Otherwise, you’ll have to reconnect it later by pressing the Xbox button.
However, if you’re having a problem with your Xbox controller disconnecting, it probably happens much more frequently than every 15 minutes. If that’s the case, you can try a few troubleshooting steps.
It’s important to confirm that your batteries are charged when you have this issue. Tap the Xbox button to go back to the Home menu, then look for the battery icon in the top-right corner. If they’re low, replace or charge them as necessary.
Frequent disconnects can also happen because of interference. The Xbox One controller has a wireless range of about 19-28 feet, according to Xbox Support. Try moving closer to your console if your controller won’t stay connected.
You should also remove obstructions between the controller and console, like laptops, metal shelving, and similar. If your Xbox is inside an entertainment center, try moving it outside the unit to get a better connection.
Solution : Update Your Controllers Firmware
In this solution, we are going to update the Xbox One Controller firmware as the outdated version can be causing the error. There are three ways to do this properly. Follow the respective steps to update in your preferred way: Update through Micro USB Cable:
Like To Give Your Xbox Console A Fresh Start Lets Restart
Xbox is one of a widely used gaming console developed by Microsoft. You will connect the Xbox gaming console with your TV to play any game online or offline and get a realistic gaming experience. If your Xbox console runs slowly, not working properly, Xbox wont turn on, you need to perform a restart or reboot Xbox device. Restarting Xbox will terminate any bugs and glitches on your console. Restarting your Xbox One or Xbox 360 will never delete or remove your saved data and games, so you need not worry about data loss.
Read Also: How Much Does The Original Xbox Weigh
Factory Reset Xbox One
When changes made to an Xbox One after it left the factory are reversed, and the console is returned to a state similar to that when it was first shipped, this is called a factory reset.
In other words, all your saved games on your Xbox One will be wiped, but this resetting is quite effective to restore the console to proper working order.
To factory reset Xbox One, please refer to the following steps:
Step 1: Press the home button on the Xbox One controller when the console is on. And go to System.
Step 2: Access the Xbox One Settings menu by pressing the gear-shaped icon.
Step 3: Choose System from the left panel and then choose the Console info section.
Step 4: Go to Reset console and choose Reset and remove everything for a full factory reset. Please note there are other two options as the following image shows:
- Reset and keep my games & apps: This is your primary choice when troubleshooting. This option just resets the OS and deletes all potentially corrupted data without deleting your games and apps. In other words, this choice is not the best one when you run into the problems that are caused by the corrupted game files.
- Cancel: Select this option if you dont want to restore your console to the factory state.
Now, wait for a while as the Xbox One restores itself back to its factory settings.
How Do I Recover My Information After A Factory Reset
If youve performed a factory reset and still have the console youll want to reload all of your purchases, games, and profile. Getting your data back is easy. Simply sign in using the same profile you used prior to the reset.
All of your games can be downloaded again while your game progress shouldve saved to the cloud. Just keep in mind, if your Xbox wasnt connected to the internet before you reset it, you may risk losing your game progress because there was no backup performed.
Recommended Reading: How To Connect Airpods To Xbox One Controller
Q4 How To Check Xbox Controller Driver Version
To check the driver version of your Microsoft Xbox One controller, follow the steps shared below:
- Open the Device Manager tool on your computer.
- Expand the Xbox Peripherals category.
- Double-click on Microsoft Xbox One Controller.
- On the Properties window, go to the Driver tab and view the driver version.
Restart Xbox One On The Controller
Time Needed :1 minutes
This is the easier way as you dont need to go near the console at all. You simply have to use the controller all the time. However, if for some reason, your Xbox One wont respond to this method, feel free to restart it using the first method.
Make sure that your controller is connected to the console.
On your controller, press and hold the button with the Xbox logo until the Power Center shows up on the screen.
Navigate to Restart console> Restart to restart the console.
Don’t Miss: Can I Use My Airpods With My Xbox
How To Restart An Xbox One On The Console Or A Controller Or Shut It Down
- You can restart an Xbox One if you want to fix any bugs or glitches with the console.
- There are multiple ways to run a power off and on cycle on an Xbox One, including a forced manual shutdown.
- Restarting or powering an Xbox One off will not erase games or saved data, so dont be afraid to restart the console when it isnt working properly.
- Visit Business Insiders homepage for more stories.
Even an Xbox One, one of the most advanced gaming consoles yet developed, can experience its fair share of glitches.
If your Xbox is running too slowly, having response or connectivity issues, or is experiencing any other bugs, usually the best thing to do is just turn it off and then back on again.
Running a power cycle that restarts an Xbox One will also reset the software, usually clearing out any glitches that were affecting game play.
Shutting the system down is also a good idea at the end of any gaming session even if the system is running error free, as it saves power and allows the console to rest.
What If Your Xbox One Controller Is Still Not Working
If nothing else works, head to the Xbox device support page. Sign in with your Microsoft account, register your console if you haven’t yet, and you can proceed through the steps to replace your controller. If Microsoft won’t replace it, you’ll need to look for a deal on a new controller instead.
Hopefully, one of these tips cleared up your Xbox One controller problem. Whether your controller won’t connect, keeps flashing, or won’t turn on, one of these tips should get you back in the game.
And now that you have a working controller, you can get back to enjoying the best Xbox has to offer.
Recommended Reading: Will Xbox 360 Play Blu Ray
What Controllers Does Steam Support
There are a variety of different controllers you can use on Steam. Here are the most common ones:
The Steam Controller
All Xbox controllers, new or old, wired or wireless
PS4 Controller, wired or wireless
PS5 Controller, wired or wireless
Wired Nintendo Switch Pro Controller
For a very detailed database of supported controllers, please visit this page to find out if yours is on the list. In general, almost all USB or wireless controllers would work with Steam. Its rare to find something that Steam doesnt support nowadays.
You can potentially use a GameCube Controller with an adapter and some extra software too. It might take some fiddling, but youre more than welcome to try and find some good settings.
How To Fix Your Xbox One: Learn How To Factory Reset Your Xbox One
Performing a factory reset on a device is pretty standard when selling or attempting to fix an error. The process removes all data and personal information leaving behind the operating system of a brand new machine.
Tech likes to misbehave every once in a while and, while its rare, your Xbox One may crash mid-game, an error message may surprise you when installing a game, or the universe throws up some other unexpected problem.
Most of the time a problem can be resolved by simply closing down whatever it was you were doing and opening it up again. Sometimes, though, a problem doesnt go away, and thats something only the age-old mantra of tech support can solve have you tried turning it on and off again?
Wondering just how to go about doing that? Our guide to fixing your Xbox One woes can guide you through the process.
Recommended Reading: How To Play Bedwars On Xbox
Way : Update The Xbox Controllers Firmware Using The Using Xbox Accessories App
You can also install the latest firmware updates for your Xbox One controller wirelessly through the Xbox Accessories app. Here are the step-by-step instructions for the same.
- First, you need to download the Xbox Accessories app from the Microsoft store.
- After the application is installed, launch it and click on the three horizontal dots button to access more options.
- Click on the Firmware version box available on the top-left of the screen.
Note: If this Firmware version box says no update available, then it means you already have the latest firmware update installed for your Xbox One controller.
- Next, click the Update now button to begin the process.
- After the update process is finished, click the Close button.
Remove Connected Xbox Accessories
Sometimes Xbox One accessories, attached either to the controller or console, can introduce connection issues.
If you have an external hard drive, keyboard, or similar peripheral connected to your Xbox, try disconnecting it and then attempt to connect your controller again. Do the same for the Stereo Headset Adapter on your controller, if you have it.
If you’re trying to sync your controller using a USB cable, make sure you’re using a high-quality cord. Low-quality or damaged cables may not work correctly.
You May Like: Xbox One S Support 4k
Reset Your Xbox One From The Console
How To Troubleshoot An Xbox One Controller On Pc
Posted on by Mel Hawthorne
If youre trying to game on PC with an Xbox One controller, it can be really annoying if you face issues with your controller. Any sort of issue can be annoying such as button presses not registering or the controller disconnecting. These sorts of issues can affect your performance in-game at critical moments or just prevent you from being able to reliably play. No matter the cause, or the exact issue you have, youll likely want to fix it, so you can get back in the game.
Read Also: How To Remove Disk From Xbox One
How To Factory Reset Your Xbox One
To perform a hard restart, hold the power button for 10 seconds while the system is on. The system will turn off. When you hit the button again, it will start and display the green start-up screen. All your data is preserved, but cache is cleared and some settings are reverted and log-in or game start issues are resolved.
Alternatively, you can perform a full shutdown by going to SETTINGS > POWER & STARTUP and change POWER MODE from Instant-On to Energy-saving. After changing the setting, choose “Turn Xbox off”. It can be powered back on by holding down the GUIDE button on the Xbox controller or the button on the front of the Xbox console. Once it’s back online you can go back to SETTINGS > POWER & STARTUP and re-enable Instant-on.
If the manual button/menu-initiated reboot doesn’t work, do it the old-fashioned way: power down the Xbox One, unplug it, wait for 10 seconds, plug everything back in and power it back on.
Try Connecting With A Usb Cable Permanently
If you find that your Xbox controller connection issues clear up when using a USB cable, your best bet might be to use your controller as a wired device to prevent future issues. You can buy a long cable, like the 15-foot MATEIN micro-USB cable, so you don’t have to worry about sitting far away from your system.
This isn’t ideal, but it beats spending the money on another controller.
Recommended Reading: How To Delete A Xbox 360 Account
How Do I Program And/or Reset The Advanced Gaming Buttons
Programming the advanced-gaming buttons
Note: Programmed buttons will remain in memory even after disconnected.
Resetting the advance-gaming buttons
How To Restore Xbox One To Factory Settings
The first step in resetting an Xbox One is to open the main menu. This can be accomplished in one of two ways:
Press down on the d-pad until you reach the gear icon.
Press the A button to select the gear icon.
With all settings highlighted, press the A button again to open the settings menu.
Press down on the d-pad until you reach System.
Press the A button to open the System submenu.
With console info highlighted, press the A button again.
Press down on the d-pad to select reset console.
Press the A button to select this option and move to the final step.
Press left on the d-pad to select the reset option that you want.
If you want to leave game and app data in place, then highlight Reset and keep my games & apps. Then press the A button. This is the less thorough of the two options, as it only resets the Xbox One firmware and settings without touching your games and apps. Try this first, as it allows you to avoid downloading everything all over again.
There is no confirmation screen or prompt. When you press the A button with a reset option highlighted, the system will be reset immediately.
You May Like: How To Tether Phone Internet To Xbox One
How To Calibrate Your Ps Or Xbox Controller In Windows 10
All gamers know the importance of maintaining their gear, and this includes making sure the controllers are in perfect condition. Some issues can often mess up your aim or even movement, as competitive shooters require the most precise of actions. Luckily, there are ways to reset controller axes on Windows 10.
If you want to learn how to calibrate a controller on Windows 10, this article will help you. There are plenty of options to follow. Well also answer some burning questions you may have.
How To Reset Xbox 360 Controllers
Xbox 360 controller
The same method to properly turn off the Xbox 360 controller is used to restart it. To avoid causing issues with Xbox Live profiles and system errors, a specific set of commands is necessary to properly restart the controller. This step-by-step guide will take you through that resetting process.
Locate the large “X” or “Menu” button in the center of the Xbox 360 controller. Press the “Menu” button to bring up the quick guide.
Sign out of the Xbox Live profile by pressing the blue “X” button on the right side of the controller. A new prompt window will then appear.
Select “Yes, sign out” from the new prompt window, to properly sign out of the Xbox Live profile.
Hold down the center “Menu” button until a prompt window appears. Three options will be apparent on the prompt. Select “Turn off controller” and the Xbox 360 controller will turn off.
Press the “Menu” button in the center of the Xbox 360 controller until it begins to flash lights around it. The Xbox 360 controller will now be fully restarted.
Pulling the battery out of the Xbox 360 controller will also turn it off or restart it.
When pulling the battery out of the Xbox 360 controller, it will still be signed into the profile and will often cause errors.
Recommended Reading: How To Delete Profiles Off Xbox 360