Tuesday, May 30, 2023

How To Reset Xbox 360 Controller

Don't Miss

Tip: How Do I Connect My Xbox Controller To Windows 10


Connect your Xbox One Wireless Controller to your PC using Bluetooth. Make sure you have updated your personal computers Windows to Windows 10.

  • Turn on your Xbox Wireless Controller by pressing the Xbox button.
  • Press the controller Connect button for three seconds and let go.
  • The Xbox controller will be connected to windows 10.

    How You Can Reset Xbox 360 Console Controllers

    HOW TO reset Xbox 360

    Video taken from the channel: Chris Rex

    If you enjoy the video leave a like and subscribe for more content like this in the future! Thank you all for Watching…

    Video taken from the channel: Edge

    This video will show you 4 ways to fix an xbox 360 controller that will not turn on..music: https://youtu.be/WxIVhbm7JLc.

    Video taken from the channel: Vladimir Putin

    Did you not get the ability to enable all your modes the first time you turned your chip on? Did you buy a Controller that had modes Disabled? Did you just want to enable and disable your own modes? Well now you can. Quickdrawmods has always sold master mods and never upcharged for any modes on the Octofire or the Godfather Rapid fire 53 mode chips. Others Have. It is now been 3 years into next genreation. So we are releasing the reset code so people no longer have to mail their controllers in to be reset. Those who bought DIY kets can lock and unlock modes as they see fit. Especially those who bought DIY kits and installed them wrong and locked out all the modes due to a poor install..So here it is it is pretty simple..This should not upset any other sellers . If you are still charging per mode, chances are your not selling last gen controllers anymore

    Video taken from the channel: QUICKDRAWMODS1

    Video taken from the channel: CControllerz

    Video taken from the channel: Qieri

    List of related literature:

    How To Reset An Xbox One Controller

    If you run into problems with your Xbox One controller instead of the console itself, you can turn off the controller too. Press and hold the Xbox button on the controller for several seconds to shut it down. You can turn it back on by pressing the Xbox button again.

    See our troubleshooting guide for Xbox One controllers if you still have problems after this.

    Recommended Reading: Finding Xbox One Ip Address

    Install The Latest Drivers

    Sometimes your Xbox 360 Controller might not be recognized due to outdated driver, and if thats the case, make sure that your Windows 10 is up to date with latest patches.

    In addition, you can also download the necessary drivers from this link. After youve downloaded and installed the appropriate driver, Xbox 360 Controller should start working again.

    If this method doesnt work or you do not have the necessary computer skills to update/fix the drivers manually, we strongly suggest to do it automatically by using DriverFix tool.

    After several tests, our team concluded that this is the best automatized solution.

    Most of the time, the generic drivers for your PCs hardware and peripherals are not properly updated by the system.There are key differences between a generic driver and a manufacturers driver.Searching for the right driver version for each of your hardware components can become tedious. Thats why an automated assistant can help you find and update your system with the correct drivers every time, and we strongly recommend DriverFix. Heres how to do it:

    Afterglow Wired Xbox 360 Controller Issue

    How To Reset Xbox One Controller Firmware To Factory ...

    The wired controller connects to the xbox 360 and the lights around the X on the controller blinks, but the controller doesn’t register and will only blink. I can leave it alone for as long as I want, but it wont register as Player 1 or any player. It doesn’t register if another controller is already registered either. It has been working for a few months perfectly fine, only recently has this problem arouse.

    Posted byelxtigrex91on

    • AnonymousMar 15, 2014

      afterglow head set is not connecting to xbox 360afterglow head set is not connecting to xbox 360

    • An expert who has achieved level 1.

      New Friend:

      An expert that has 1 follower.


      An expert whose answer got voted for 2 times.

    • Contributor
    • 1 Answer

    If you are running Windows 7, Go to Start> ControlPanel> Device Manager. In the Device list you should see the Afterglow controller in the list with a yellow exclamation mark next to it. Click on the selection. Then click on drivers tab. Then click update driver. When asked if you want to search for drivers online or browse PC for drivers, choose browse PC. Look for XBOX 360 Controller for Windows Version . Select that and you should successfully install the driver for the Afterglow controller.

    Posted on Jan 01, 2013

    Don’t Miss: How To Cross Play Xbox And Ps4 Fortnite

    Locate Your Xbox 360 Serial Number Before Resetting

    Before you reset your Xbox 360, locate the serial number of your console and write it down. When you attempt to format the hard drive, you’re usually unable to proceed without this number.

    You can find the serial number of your Xbox 360 on the back of the console, but if the number has been scratched off or obscured, you can also find it in the system settings menu:

  • Press the Guide button to open the Xbox Guide.

  • Navigate to the Settings tab.

  • Select System Settings.

  • With the System Settings menu open, select Console Settings.

  • Scroll down to select System Info.


  • The System Info screen has a lot of information about your Xbox 360 console, but what you need is the Console Serial Number.


  • Locate the Console Serial Number, write it down, then press the B button on your controller until you’ve returned to the main System Settings menu.

  • When you reset your Xbox 360, all of the information that’s stored on the hard drive will be removed. This includes all of the games you’ve downloaded, save data, your profile, and everything else stored on the hard drive. If you want to preserve any of this data, you need to back it up.

    Your profile will be deleted from the Xbox 360, but this will not delete your Xbox network account or cancel your Xbox Gold subscription. You will still be able to log back in on this console or any other console in the future.

    What To Do If You Get Red Ring Of Death On Xbox 360

    It always comes with an error code like E-74 on your TV. You can follow these steps to fix red rings of death on Xbox 360: Shut down your Xbox 360 completely. Unplug all cables and devices from the console. These components include power sources, controllers, USB sticks, and other accessories. Remove the external hard drive from the console.

    Also Check: How To Delete Profiles Off Xbox 360

    Fix Xbox 360 Wired Controller Not Working

    The solution is pretty simple: youll have to make sure that youre using a powered USB port.

    Sometimes wired Xbox 360 Controller might not work with Windows 10 if you connect it to the USB port on the front of your computer.

    In order to fix any potential issues with wired Xbox 360 Controller, its always better to connect it to the USB port on the back of your computer since those ports are usually powered USB ports.

    If youre using a USB hub, its also advised that you dont connect the wired Xbox 360 Controller to it since most USB hubs dont come with powered USB ports.

    Using Xbox 360 controller on Windows 10 is a great way to save money since both wireless and wired Xbox 360 Controllers are compatible with Windows 10.

    Although Xbox 360 Controller might have some issues on Windows 10, you can easily resolve most of them by following our solutions.

    Dont forget to share your problem and how you solved it in the comments section below.

  • rated Great on TrustPilot.com .
  • Click Start Scan to find Windows issues that could be causing PC problems.
  • Click Repair All to fix issues with Patented Technologies .
  • Restoro has been downloaded by 0 readers this month.

    How To Calibrate A Xbox 360 Controller For Windows

    How to reset your controller on XBox one?
    • 18 September 2019 10:16

    When you perform a calibration, you set the range of motion for the axes of the controller. You don’t have to calibrate the controller unless you want to customize the range of motion of the axes.

    To calibrate the Xbox 360 Controller for Windows, plug your controller into one of your computers USB ports and follow these steps.

  • Open the Game Controllers window:
  • In Windows 10, type joy.cpl in the Search box, and then select the joy.cpl result to bring up the Game Controllers window.
  • In Windows 8.1, swipe in from the right edge of the screen, and then select Search. Type joy.cpl, and then select Game Controllers in the search results.
  • In Windows 7, select Start. In the Search programs and files box, type joy.cpl, and then select the Game Controllers icon when it appears.
  • In the Game Controllers window, select XNA Gamepad, and then select Properties.
  • Select the Settings tab, and then select Calibrate.
  • Follow the steps in the Device Calibration Wizard.

    Important When you’re prompted to use the directional pad , use the left stick instead. If you use the D-pad, the left stick configuration may be incorrect.

  • To save the new calibration settings, select Finish, and then select Apply.
  • Recommended Reading: Why Does It Cost Money To Change Gamertag

    Removing The Parental Controls

  • 1Press the Guide button on your Xbox controller. This button is in the center and looks like the Xbox logo. This will open the Guide menu.
  • If you are trying to bypass parental controls set by your parents, you won’t be able to. Microsoft will require proof that you’re authorized to change the parental control password.
  • 2Open the Settings menu and select “Family. This will open the parental controls section.
  • 3Select “Content Controls. You’ll be prompted to enter the current passcode.
  • 4Enter the wrong passcode to force a reset. Since you don’t know the passcode to access the Family menu, enter the wrong one so that you are prompted to reset the passcode.
  • 5Select “Reset Pass Code” when prompted. This will display the security question to reset the passcode.
  • 6Answer the question if you can. If you were the one that set up the passcode, answer your security question and you’ll be able to create a new passcode. If you don’t remember the answer to the passcode or a previous owner enabled parental controls, read on.
  • 7Contact Xbox Support if you can’t answer the security question. If the previous owner had a passcode enabled and didn’t remove it before selling it, or you don’t remember the answer to your security question, you’ll need to call Xbox Support to get a master reset passcode.
  • You can contact support at support.xbox.com, via online chat or telephone. You’ll be asked some questions to verify that you are allowed to disable parental controls .XResearch source
  • How To Factory Reset Your Xbox 360

    If you want to completely erase everything on your Xbox 360, follow these steps. Make sure you’ve backed up any data that you don’t want to lose beforehand.

  • Scroll over to Settings on the home screen.
  • Select the System entry and choose Console Settings.
  • Scroll down to System Info and select it.
  • Note the Console Serial Number shown here, as you’ll need it in a moment.
  • Jump back to the System Settings menu and choose Storage.
  • Select the Hard Drive entry that’s connected to your Xbox 360.
  • Choose Format. Confirm the operation, then your Xbox will ask you to enter the serial number that you copied down a moment ago.
  • Once you enter the serial number, your Xbox will perform a factory reset.
  • Also Check: How To Manually Eject Disc From Xbox One

    What Do I Need To Do To Fix My Xbox 360

    Turn off the Xbox 360 completely. All lights should be deactivated, and you should hear the fan in the console turn off. Disconnect all cables and devices from the console. This includes power sources, controllers, USB sticks, and other accessories. Remove the external hard drive if one is attached.

    It always comes with an error code like E-74 on your TV. You can follow these steps to fix red rings of death on Xbox 360: Shut down your Xbox 360 completely. Unplug all cables and devices from the console. These components include power sources, controllers, USB sticks, and other accessories. Remove the external hard drive from the console.

    How Do I Reinstall My Xbox 360 Controller Driver

    Fastest way to controller reset! Xbox Elite controller 2 ...

    In Device Manager locate Xbox 360 Wireless Receiver for Windows and right-click it. Choose Uninstall from the menu. After the driver has been uninstalled, restart your computer. When your computer restarts, Windows 10 will automatically install the missing driver.

    You May Like: How To Take Off Parental Controls On Xbox

    Fix The Battery & Power Issues

    Dead batteries can affect the performance of the console. This affects the speed as well as the interaction with the device.

    Here are the steps to fix the issue.

    • Remove the battery packs and batteries.
    • Shove the button on the top of the battery cap and open it and bring out batteries from the battery packs.
    • Replace the batteries with new ones.
    • Recharge the controller if you have a reusable battery pack. It can easily charge through a USB cable. Plug the console with the device to charge and let it keep aside for 2,3 hours to charge.


    • Make sure that your Xbox turns on. If you are using a USB cable to charge.
    • You can play while your Xbox 360 is charging.
    • When you attach your Xbox 360 controller with the console its the light turns in red. The light will turn green when it fully charges.
    • Check out the metal contact at bottom of a battery pack. If it is decayed then you will not be able to turn on the controller.You need to clean them.

    Find out that if your battery pack is loose or trembling. Then you need to fix it. This may cause your controller to turn off. The basic and general reason for turning off the Xbox 360 as mentioned above. If the problem persists, move on to the next method.

    Why Wont My Xbox 360 Controller Connect

    This may mean one of the following: The Xbox 360 Wireless Controller batteries are weak, or the Xbox 360 Rechargeable Battery Pack needs recharging. Another wireless device, such as a microwave oven, a cordless phone, or a wireless router, is causing interference. Four controllers are already connected to the console.

    Also Check: Xbox 360 Does It Play Blu Ray

    Xbox Resets Made Easy

    As we’ve demonstrated, it isn’t difficult to reset your Xbox One or Xbox 360. Just make sure that you have everything important backed up, since you can’t undo this once you make a decision. Backing up data to Xbox Live is an easy option, but you can also move some files to an external device like a flash drive.

    Are you running out of space on your Xbox One? Then take a look at our guide to Xbox One external hard drives to find out everything you need to know.

    Image Credit: ampolsonthong/Depositphotos

    Why Is My Controller Not Turning On

    How to Fix Xbox One Controller Won’t Connect (Hard Reset Method!)

    The cable could be worn out or broken. Make sure its securely plugged in on both ends. If thats not the issue, unplug it from the Xbox One and plug it into a different USB port on the console. If the controller still wont turn on, disconnect the Play & Charge cable and try a different micro USB cable.

    You May Like: How To Make Xbox One Faster Online

    How To Hard Reset Your Xbox One

    Next, let’s look at how an Xbox One hard reset works. Like a PC, it’s a good idea to do a full shutdown every once in a while to keep everything running smoothly. This also comes in handy when your Xbox One is frozen.

    To perform a hard reset on your Xbox One, press and hold the Xbox button on the front of the console for about 10 seconds. This will fully shut the system down. To make sure it clears out all caches, you can also unplug the power cable for about 30 seconds, then plug it back in before turning your system back on.

    If your Xbox One is completely locked up and won’t respond to your touch on the front button, you can also force it to shut down by pulling the power cable. You should only do this as a last resort, however, as suddenly losing power isn’t good for any computer.

    Xbox 360 Controller Manual

    Plug the usb connector of your xbox 360 controller into any usb 2.0 or 3.0 port on your windows pc. Nov 30, 2020 · compared with keyboard and mouse, xbox 360 controller provides you with a more flexible and better game playing experience. If you are using a xbox 360 wired controller, you can follow these steps to install your xbox 360 wired controller on windows 10. Buy wired controller for xbox 360 at gamestop. Wireless controller aa batteries instruction manuals headset thanks for purchasing your xbox 360 video game and entertainment system from microsoft.

    Also Check: Do Xbox 360 Games Look Better On Xbox One

    * A Port For Your Xbox 360 Headset Is Included

    Driver easy will automatically recognize your system and find the correct drivers for it. ® please use these instructions to set up your xbox 360 system and to learn where to go for more information. The xbox 360 core was replaced by the xbox 360 arcade in october 2007 and a 60 gb version of the xbox 360 pro was released on august 1, 2008. Feb 03, 2010 · “xbox 360 controller emulator” allows your controller to function as an xbox 360 controller. Jun 22, 2018 · 4) open the downloaded file to install the driver on your computer. * the xbox guide button at the center of the controller gives you quick access to all your favorite xbox 360 system activities, such as watching movies, listening to music, contacting friends on xbox live, and customizing your gaming experiences. Buy wired controller for xbox 360 at gamestop. Update your xbox 360 controller driver automatically if you don’t have the time, patience or skills to update your driver manually, you can do it automatically with driver easy. If you are using a xbox 360 wired controller, you can follow these steps to install your xbox 360 wired controller on windows 10. Find release dates, customer reviews, previews, and more. Wireless controller aa batteries instruction manuals headset thanks for purchasing your xbox 360 video game and entertainment system from microsoft. Jan 05, 2021 · connect a wired xbox 360 controller to a windows pc. You don’t need to know

    More articles

    Popular Articles