Clean Your Xboxone Controller
Turn off the controller and disconnect it by holding down the Xbox button for 5-10 seconds.
Wipe the base of an analog stick with a cotton swab or a soft cloth. To cover more surfaces, move the stick around.
You can also repeat the procedure with other analog sticks. Wait for the alcohol to dry completely before moving on to the next step.
How To Replace Xbox One Controller Thumbsticks
ByRichard Devinelast updated 20 November 18
Need to put some fresh thumbsticks on your controller? It’s easier than you might think.
Xbox One controllers wear out a lot quicker than you’d like, especially if you’re a heavy gamer. But, before you go running to buy a new one, think about repairing the one you have. If it still fundamentally works as it should but something is broken or worn, you can save a bundle by doing a home repair job.
In the case of the thumbsticks, they’re prone to wearing out, or worse, since they’re only plastic. If you need to replace them, it’s not actually that difficult.
Here’s everything you need to know.
Dont Throw Your Controller Away It May Be Salvageable
- Shoreline Community College
- Saint Mary-of-the-Woods College
When an Xbox One controller starts suffering from drift, youll typically notice unwanted movement while playing games. Its called controller drift, or analog stick drift, because one or both thumbsticks will drift, or move, in an undesired direction even when you arent touching them.
To fix Xbox One controller drift, you need to take the controller apart and repair or replace one or more components related to the analog sticks.
You May Like: How To Reset Xbox 360 To Factory Settings
How To Fix Worn Out Xbox One Controller Thumbstick Springs
If you still experience drift after attempting to fix your thumbstick pads or determine that they were neither dirty nor loose, then the next easiest fix is to replace your thumbstick springs. If only one thumbstick is giving you trouble, only replace the springs on that thumbstick.
To perform this fix, youll need:
- Prying tool
- Analog stick springs
A lot of controllers, including Xbox 360 controllers, use the same analog stick component as the Xbox One controllers, so you can take springs from an old controller. You can also buy a replacement analog stick and take the springs from that.
Heres how to replace the springs in an Xbox One controller analog stick:
Disassemble your controller using a pry tool and T-8 or T-9 safety Torx.
Carefully pry off the green plastic covers on the bottom and right side of the thumbstick assembly.
If you break either plastic cap, you will have to replace the entire analog stick module, which requires soldering.
Remove the springs.
Reassemble your controller and test operation.
How To Fix An Xbox One Controller Joystick
The xbox one controller joystick is the only piece of hardware that can be replaced in your current controllers. If you are experiencing issues with this part, there are many ways to fix it. With so many options available for repair, you should have no problem fixing your broken controller.
If youve ever had an Xbox one controller that seems to be not working, the joystick is likely whats wrong. Luckily there are a few quick fixes for this issue. The first fix is to make sure your battery pack in the battery compartment isnt loose or broken off.
If it is, then tighten it with a screwdriver. Another option would be to replace your controllers joystick with another one from a different controller if available. Finally, you can also purchase a new replacement joystick and install it yourself by unscrewing the old one and screwing on the new one-just dont forget to put on some rubber gloves.
1. Turn off the Xbox One 2. Unplug the controller from the console by pressing down on the small white plug at the end of the cord, then pulling up 3. Place an object under the controller to keep it elevated while you work 4. Remove all screws that are visible using a Phillips-head screwdriver 5. Gently pull apart both halves of controller with your hands until they come completely apart 6. Look for any loose parts or pieces and remove them if necessary.
How to take apart Xbox one controller: What Screwdriver To Open Xbox One Controller
Don’t Miss: Is Among Us On Xbox
Compare With Similar Items
|This item Deal4GO 2 Pack Replacement OEM Concave Analog Thumbsticks Set for Xbox one Controller Rubber Joystick Grips|
|4.5 out of 5 stars||4.7 out of 5 stars||4.5 out of 5 stars||4.2 out of 5 stars||4.3 out of 5 stars||4.2 out of 5 stars|
|Shipping||FREE Shippingon orders over $25.00 shipped by Amazon or get Fast, Free Shipping with||FREE Shippingon orders over $25.00 shipped by Amazon or get Fast, Free Shipping with||FREE Shippingon orders over $25.00 shipped by Amazon or get Fast, Free Shipping with||FREE Shippingon orders over $25.00 shipped by Amazon or get Fast, Free Shipping with||FREE Shippingon orders over $25.00 shipped by Amazon or get Fast, Free Shipping with||FREE Shippingon orders over $25.00 shipped by Amazon or get Fast, Free Shipping with|
|0.98 x 0.79 x 0.59 inches||1.18 x 0.79 x 0.39 inches||0.9 x 0.9 x 0.4 inches||5.98 x 3.98 x 1.69 inches||3.94 x 1.97 x 1.97 inches||6 x 4 x 0.25 inches|
|Xbox One, Xbox Series X||Xbox One|
Fix And Repair Issues On Non
Are you tired of having a controller thats not working well because of the joystick? If so, youre in luck. The following tutorial will show how to replace the joystick to fix many issues. These issues include stick drift, creeping, stuttering, blind spots, dead zones, no click, non-centered, broken, and loose joysticks. Also, the type of controllers this will work on are the Standard, S, X, and Elite Series 1 Xbox One Controllers. In this video, we will show how to test the controller, take the controller apart, remove the analog joystick, install the joystick, and manually calibrate it.
Recommended Reading: What Was The First Xbox
Deal4go 2 Pack Replacement Oem Concave Analog Thumbsticks Set For Xbox One Controller Rubber Joystick Grips
- Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
- Make sure this fitsby entering your model number.
- NEW and ORIGINAL from Xbox one OEM Factory that has never been used.
- Compatible with Xbox One /Xbox One S/Xbox One X/Dualshock 4 Controllers.
- Require technical internal fitting, Controller must be opened to install.
- These thumbstick will fit for Xbox One controllers without any modification, ideal for replacing warn or damaged thumb Grips.
- Each pack comes with 2x Thumb Grips , Enough for ONE controller.
What Is Xbox One Controller Joystick Drift
As you know, an Xbox One controller comes with two joysticks that you use for interacting with games. The joysticks may do different things based on the game. For example, it could move the character or change the point of view. Under usual conditions, these joysticks work perfectly. That is, you can see the character movement when you move the joystick.
However, this movement happens without your input when there is a joystick drift. Even when the joystick is left on its own, it will trigger movement. For instance, if you play a racing game, the vehicle may drift left or right even when you want it to remain straight. As you can guess, it could be a big problem while you are playing any game.
In other words, having the joystick drift issue on an Xbox One controller is like throwing accuracy out of the window.
Don’t Miss: How Much Are Xbox Games
Clean Your Xbox One Controller
First, disconnect and turn off your controller by pressing the Xbox button for 5â10 seconds. Then apply a small amount of rubbing alcohol to a cotton swab or soft cloth and wipe the analog stick, especially at the base. Move the stick around as you clean so you can cover more area. Repeat this process for the other analog stick. Before moving to the next step, wait for the alcohol to completely dry.
To clean your Xbox controller using canned air:
Compressed air should help clear out any debris that’s causing controller drift. One important tip: Always keep the can level when spraying the joysticks as turning it sideways could send moisture into your controller and cause further damage. Here’s what else you should do to clean it safely:
Even if your controller is working properly, spraying it with compressed air about once a month will help keep it clean and prolong its life.
Don’t Let A Glitched Controller Mean Game Over
The Asurion Home+ protection plan offers peace of mind for all of your eligible home tech, including your favorite gaming systems, for less than $1 per day. From graphical glitches to faulty drives, we cover your video game console and original controller from the unexpected breakdownâno matter where or when you purchased it. Learn more at asurion.com/homeplus.
The devices we love arenât cheap. Protect them with Asurion Home+.
Weâll cover all your favorite home tech for less than $1 per day. No receipts or registration forms required.
You May Like: Is Xbox Live Included In Game Pass
What Is Xbox One Controller Drift
The most common situation involves drift in the left analog stick, which usually manifests in your character constantly looking up in first-person games. However, the right stick can also suffer from drift issues. You may also notice that when you move one of the analog sticks in any direction, it will continue registering that movement even after taking your thumb off the stick.
When Xbox One controller drift occurs, there are three main causes:
- Worn out thumbstick pad: Each thumbstick consists of a boxy sensor component with a moveable shaft on top and a rubber or plastic component that snaps onto the shaft. If the rubber or plastic piece becomes worn, replacing or repairing it will fix your drift issue. In some cases, a similar issue can be caused by dirty thumbstick pads.
- Worn out springs: Each thumbstick sensor component has two springs that help snap it back to the center whenever you remove your thumb. When one or both springs wear out, youll notice drift. Replacing the springs fixes that problem.
- Bad thumbstick unit: Each thumbstick consists of a boxy sensor component thats soldered to the controller circuit board. This component can fail internally, in which case the only possible fix is to replace it with a new part.
D Joystick For Microsoft Xbox One S Controller
If the button on your console Microsoft Xbox One S doesn’t work, this is the part you need to make your device work again and without damage.
Original and OEM spare parts
Originality: OEM – Spare part sold as OEM is manufactured to the same standards, specifications and materials as the original. This is a copy of the original, and the spare part delivered as an OEM may have minimal variations in functionality, quality or appearance.To find out more about originality, read our blog where we focus on originality in more detail.
Assembly and tips:
- special tools, which can be found in our offer, are required for assembling or disassembling
- while assembling, pay attention to the fragile parts of the connectors
- test the functionality of the part before assembling
- try to perform repairs in a dry, dust-free environment without direct sunlight
- the assembly of the part should be carried out by a qualified person
- we are not responsible for any damages caused during installation
- if you have any questions, please contact us at or +4212/22133399.
Have you seen our entire product portfolio and didn´t found a spare part suitable for your device Microsoft Xbox One S ? Or do you have any additional questions? Do not hesitate to contact us in any matter by e-mail at or by phone +4212/22133399.
- Device typeGaming Console Spare Parts
- Device modelMicrosoft Xbox One X, Microsoft Xbox One S
Read Also: Why Does Warzone Keep Crashing Xbox One
Why Does My Xbox One Controller Keep Slipping
Several possible reasons your Xbox controller might be malfunctioning and joystick drift is occurring. Low batteries are the most common cause. Dust and debris in your controller are a more common cause. This grime can accumulate over time and cause damage to electrical components.
Damage to the controller can also cause analog stick drift, such as from being dropped or overused. A potentiometer is a component connected to the joystick and responsible for sending signals to your consoles movement. It is susceptible, so a damaged or defective one could cause this problem.
How To Replace An Xbox One Controller Analog Stick
In some cases, youll find that one or both of your analog sticks are just worn out and need to be replaced. This is an even more complicated repair, and you shouldnt attempt it if you arent comfortable with desoldering and soldering.
Don’t attempt this fix if you don’t have experience desoldering components from a circuit board. Any mistakes with the desoldering tool or soldering iron could easily ruin your controller.
If you want to attempt this fix, youll need:
- Prying tool
Also Check: How To Get Online On Xbox One
How To Fix Worn Out Thumbstick Pads
If you notice that your Xbox One controller is suffering from thumbstick drift, youll want to start with the easiest fixes and continue from there. While dirty or worn out thumbstick pads dont represent the most common source of this problem, this is the best place to start since its the easiest and fastest thing to try out.
To perform this fix, youll need:
- Isopropyl alcohol
Reassemble the controller and test operation.
Xbox One Controller Stick Drift Fix
PS4 controllers are the best controller but there is one annoying issue. The left thumbstick will drift if you dont keep it centered. Xbox One controllers have this same problem, so Ive found a solution.
Have you ever noticed that sometimes your controller doesnt go where you want it to? If so, then this blog post is for you. Controller drift is a common problem with Xbox One controllers and can be fixed easily. This article will walk you through the process of fixing controller drift on an Xbox One controller using our handy guide.
Don’t Miss: How Many Gay People Play Xbox
What Causes The Joystick Drift On Xbox One Controller
Here are the potential causes why your Xbox One Controller shows the problem of joystick drift. Please keep in mind that one or two reasons could apply to a device.
- In some cases, low battery levels on your Xbox One controller could be the reason for the issue. Low battery levels can affect how the triggers work.
- Dust and debris accumulated inside the joystick are also known to cause the Xbox One joystick drift issues in some instances.
- If you have been using the Xbox One controller for an extended period, you should consider wear and tear as a potential culprit. After all, these joysticks are hardware items that can get damaged.
- Another common issue is the Potentiometer, a part of the joystick dealing with the detection of movement within the controller.
As you can guess, any of these factors may be the answer to why your Xbox One controller joystick is drifting while playing games. But, dont worry if you are wondering how to fix Xbox One controller drift, we have found several solutions that will help you.
Xbox 360 Controller Joystick Replacement Analog Stick Repair
What size are Xbox 360 controller screws?
Xbox 360 controller screws are .8 inches in diameter.
How many screws are in a Xbox 360 controller?
There are twelve screws in a Xbox 360 controller.
How do I take apart an Xbox 360 controller?
There are several ways to take apart an Xbox 360 controller. One way is to remove the four screws that hold the bottom cover in place. Once the screws are removed, the bottom cover can be pulled off. The other way is to remove the four screws that hold the top cover in place. Once these screws are removed, the top cover can be pulled off. The controller internals can then be accessed by removing the eight screws that hold the controller together.
What screwdriver Do you need to open a Xbox 360 controller?
There are several screwdrivers that you can use to open a Xbox 360 controller, but the most common one is a Phillips head screwdriver.
Can you repair Xbox 360 controller?
Xbox 360 controllers are not easily repairable. If the controller has a fault, it is likely that the controller will need to be replaced.
Are Xbox 360 and Xbox One Joysticks the same?
Xbox 360 and Xbox One controllers are not the same. The Xbox One controller has a number of features that the Xbox 360 controller does not have.
How do I connect my Xbox 360 controller to Windows 10?
There are a few ways to connect your Xbox 360 controller to Windows 10. You can use the Xbox 360 Controller for Windows 10 app, use a USB cable, or Bluetooth.
How do I change controllers on my PC?
Don’t Miss: How Much Are Xbox One X