Turn On Your Xbox One
Turn your Xbox One on by pressing the Xbox button on the front. The button is located on the right side of the front of the console regardless of whether you have an Xbox One, Xbox One S or Xbox One X.
When the console has turned on, the button will illuminate. You can let go of the button and go to the next step.
Simple Tips To Connect A Controller To A Pc
If you have an Xbox One console and love to use the controller while gaming then definitely you want to use it on your PC also. Gaming on PC is through default keyboard and mouse which gives you a lot of options but still if you are finding it hard and looking for a solution on how to pair the Xbox controller to a Windows 10 PC then here is a guide for you. Xbox One controller connects through Bluetooth to the console, the same method can be used to connect it to a PC. It is simple and will allow you to enjoy games on PC using an Xbox Controler. There are two ways to connect an Xbox One controller to a PC.
Connect Xbox One Controller To Pc Via Usb
Using a USB cable is by far the simplest way to connect Xbox One controller to PC. Since all versions of the Xbox One controller have a Micro USB connector on them, you can directly connect the controller to a PC via a Micro USB cable.
So if you don’t mind the wired connection, you can follow the steps below to connect Xbox One controller to PC via USB cable.
Step 1. Connect your Micro USB cable to your Windows PC.
Step 2. Connect the Micro USB end to your Xbox One controller.
Step 3. Press the Xbox logo key on your controller to turn it on.
After the Xbox One controller is connected, you can enjoy the Xbox games on Windows PC.
Also Check: Ps3 Usb Mod Menu Download
Why Is My Xbox One Controller Connected But Not Working Pc
It is possible that your Xbox One controller driver has been corrupted. It is possible that your controller does not accept the USB cable. There are times when your PC does not detect the Xbox One controller, which can be caused by your USB port. You can connect your controller to the USB port on the back of your PC to resolve this issue.
Pairing Your Controller With A Pc Mac And More
You can also pair your controller with other devices such as a Windows PC, Mac, and more via a standard Bluetooth connection. The process is similar to pairing with an Xbox, but youll likely have to adapt some steps depending on the device.
In general, though, to pair your controller with another device, press and hold the pairing button along the top edge near the battery compartment. Youll know your controller is in pairing mode when the Xbox logo flashes rapidly.
You now have 20 seconds to pair your controller with the device you want to use. Open the Bluetooth pairing interface on the device, and then select the controller. It should immediately pair if its compatible.
Youll have to do this if you want to play Xbox games remotely on your smartphone. Note that the Xbox Series X and S controller currently isnt compatible with the iPhone or iPad natively, so they will refuse to pair.
Microsoft has promised a future update will add support for Apple devices, but youll have to connect your controller to an Xbox to apply the update.
Don’t Miss: How To Install Mods On Xbox 360
How Do I Connect My Xbox One Controller To My Pc Via Bluetooth
How To Connect Xbox Controller To Pc: Connect Via Xbox Wireless Adapter
While you will need to purchase an Xbox Wireless adapter separately, connecting your Xbox wireless controller to your PC is extremely simple using this accessory. Its the easiest way to set up your pad on a PC with a wireless connection. 1. Plug the Xbox Wireless adapter into a USB port. The adapter comes with a standard USB-A connector, so youll need a laptop that has one of these ports.2. Turn on your Xbox controller by holding the Xbox button. Once your controller is switched on, hold the sync button. This is located on top of the controller until the Xbox logo begins flashing.
3. Hold the sync button on the Xbox Wireless adapter for a few seconds. This button is located on either the side of the adapter or the base depending on which model you have. When the Xbox logo on your controller stops flashing and is lit up solid, then your controller is connected.
Recommended Reading: How To Adjust Xbox One Screen Size
How To Connect An Xbox One Controller To Pc Via Bluetooth
You have an Xbox One controller, but no wireless dongle. Don’t worry. You can now connect your controller to your PC via Bluetooth. Here’s how!
Shortly after the reveal of the Xbox One S, we learned the new Xbox One controller that ships with the console is capable of connecting to a PC without having to own an adapter. Thats because the Xbox One S controller features Bluetooth support, in addition to an improved wireless transmitter. But how can you connect your Xbox One S controller to your PC via Bluetooth?
Its actually much easier than you would think.
How To Use An Xbox One Controller With Your Pc
Once upon a time, Microsoft didn’t support its own controllers on its own PC platform. You needed hacked drivers and workarounds to use the excellent Xbox One controller with PC games. That’s no longer the case, with official drivers built right into Windows 10. So, while it’s easy to do, there’s more to it than just plugging it in. Here’s a complete guide.
Before You Begin Identify Your Controller
The exact steps you have to go through to connect your Xbox One controller to a PC vary depending on the version of controller you have.
First of all, do you actually have an Xbox One controller? The Xbox 360 controller is compatible with all the same PC games, since they use the same xinput software interface. The buttons and controls are identical.
However, Xbox 360 controllers require a special USB receiver to work with a PC. So if your controller looks like this:
Then you need to buy one of these:
Then just follow the instructions in the box, which essentially says to plug in the receiver and then press the two connection buttons on the controller and receiver respectively.
Were not here to talk about the old Xbox 360 controller however. This is about getting your game on with the shiny new controller that was released alongside the Xbox One.
There are two versions of this controller. The older versions, which shipped with original Xbox One models, uses a non-standard Microsoft wireless signal system. Which means you cant connect it directly to a PC. Instead, you have to buy one of these dongles for Windows.
The newer version of the controller that ships with modern Xbox One consoles uses plain old Bluetooth. You can connect these Xbox One controllers to your PC with no extra expenditure required.
Connect Your Xbox Controller To Pc With A Usb Adapter
If you have an older Xbox One controller, or you just want to use your newer one with Microsoft’s proprietary wireless connection instead of Bluetooth , you need to get the Xbox Wireless Adapter for Windows 10. It’s a USB dongle designed to connect directly to your Xbox gamepad without any Bluetooth setup or pairing. All you need to do is plug in the dongle and pair it to your controller just as if you were pairing your Xbox, pressing the Pairing button on each device.
If You Have An Older Xbox One Wireless Controller
If you are one of the people without one of the Bluetooth equipped Xbox controllers, or you have a PC without Bluetooth, you’re going to need the Xbox wireless adapter. It’s a proprietary dongle Microsoft makes that pairs to the controller using a dedicated wireless connection.
Once you have one of those adapters, you simply plug it in to a spare USB port on your Windows laptop or desktop, and then press and hold the pairing button on the side until the light starts blinking.
Now you switch on your Xbox controller by pressing the central home button, and then press and hold the pairing button on the top edge until that big ‘X’ starts flashing.
At this point the wireless adapter and your control pad should find each other automatically, and then after a few seconds they’ll connect and the lights will become constant and stop blinking on both devices.
How To Pair Your Xbox One Controller Using A Cable
If you’d rather, you can instead use a micro-USB cable to pair your Xbox One controller to your Xbox console. For the Xbox Series X|S controller, you’ll need to use a USB-C cable instead.
Simply plug the cable into a USB port on the Xbox, then connect the other end to your controller. Once they’re connected, press and hold the Xbox button on the controller to sync them. You can disconnect the cable to use the controller wirelessly after the syncing completes.
Don’t Miss: How To Adjust Aspect Ratio On Xbox One
How To Connect Xbox Controller To Pc Using Bluetooth
Bluetooth is a convenient way of connecting your Xbox One controller and PC. However, to use it with an Xbox One controller, you must have the newer model, as shown in the image below. All Xbox Series S|X controllers support Bluetooth.
If your Xbox One controller has the plastic casing around the Xbox button, as shown in the top illustration, then it is not Bluetooth-compatible. You’ll need to use the Xbox Wireless Adapter if you want to connect your Xbox controller to your PC without Bluetooth. The bottom model, where none of the plastic surrounds the Xbox button, supports Bluetooth.
Read more: Does Your Computer Have Bluetooth Built In?
To use Bluetooth, head to Settings > Devices > Bluetooth & other devices in Windows 10. Enable the Bluetooth slider , then choose Add Bluetooth or other device. Select Bluetooth from the list.
Next, press the Xbox button on your controller to turn it on. Then press and hold the Pair button on top of the controller for a few seconds, and the Xbox button will start flashing rapidly.
From here, your Xbox controller should show up in the Bluetooth pairing menu on your PC. Select it and complete the steps to pair them. If you have trouble, refer to our guide on setting up Bluetooth in Windows 10.
Taking Advantage Of The Xbox Accessories App
This is particularly handy if you’re using an Xbox Elite Controller, as the Xbox Accessories app allows you to customize the buttons and paddles to a layout of your choice.
It’s in the Windows Store to download to your PC, all you need to do is connect the controller to the PC to get started. There’s a bunch of things you can do to customize your controller for your favorite games, and you can save two profiles to the Elite Controller at any one time.
You May Like: Setting Up A Xbox Live Account
Use The Xbox Wireless Adapter To Pair Xbox One Controller To Pc
Microsoft has a standard called Xbox Wireless that’s built into a few computers, but there’s a good chance it’s not part of yours. So to sync your Xbox One controller and PC wirelessly without Bluetooth, you’ll need to buy the Xbox Wireless Adapter. This adapter lets you connect your Xbox controller to your PC wirelessly, through the same proprietary connection used by your Xbox console.
Plug it into a USB port on your PC and let Windows install drivers. Once it’s done, press and hold the button on the adapter and you’ll see a light flash.
Next, hold the Xbox button on your controller to turn it on, then press and hold the Pair button on top of the controller. After a few seconds, the controller and adapter should see each other and connect.
From here, you can enjoy your Xbox One controller on your PC wirelessly, just like using Bluetooth. We only recommend this method if you have an Xbox One controller that’s not Bluetooth-enabled. Otherwise, you could add Bluetooth to your computer with an adapter that’s cheaper than the Xbox Wireless Adapter.
Press The Connect Button On Your Xbox One Controller
The connect button on your Xbox One controller lets the Xbox One know that it is ready to connect. It is located on the top of the controller, on the same side as the triggers and USB port.
Once you have located the connect button on your controller, press and hold it. The Xboxbutton on your controller will flash, which means it’s looking for a console to connect to.
If your Xbox One controller successfully connects to your console, the Xboxbutton will stop flashing and remain lit. You can let go of the connect button and then go back to step three and repeat the process for any additional controllers that you want to connect.
You must press the connect button on the Xbox One controller within 20 seconds of pressing the connect button on the Xbox One console. If you don’t, you will have to start the process over again.
You May Like: How To Set My Home Xbox 2020
Solution : Uncheck Power Management
Probably, the power management of the controller device leads to the Xbox One Wireless Controller failing to connect to your computer. So you need to uncheck it in Device Manager.
1. Right click the Start Menu and choose Device Manager.
2. Expand Xbox Peripherals. Right click Microsoft Xbox One Controller and select Properties.
3. Select Power Management tab, and uncheck Allow the computer to turn off this device to save power. Then click OK.
After that, check if this way helps.
To conclude, this article is aimed at telling you how to connect your Xbox One Wireless Controller to your PC and how to fix the connection problem when you cannot connect the controller to PC.
Way : Using Bluetooth To Connect Your Xbox One Controller To Pc
If youre using a Bluetooth supported Xbox One controller and a Bluetooth supported PC, you can connected them via Bluetooth then.
Note: On a Bluetooth-supported controller, the plastic around the Xbox button is part of the face of the controller, like this:
To connect your controller and PC via Bluetooth:
Also Check: Can Xbox Controller Connect To Ps4
The Xbox Wireless Adapter
Microsoft also has an official wireless dongle for Windows PCs that allows you to go wire-free. The first-generation controller and the original Xbox Elite controller don’t support Bluetooth, so to go wireless on your PC, you’ll need the dongle.
It isn’t expensive, and the redesigned model is much smaller than the original. Simply plug it into your PC and connect your controller to is as you would the Xbox One, by holding down the pairing button on the top.
Press The Connect Button On Your Xbox One
The connect button is what tells your Xbox One that you are trying to connect a controller. The specific location and appearance will depend on the type of Xbox One that you have.
Xbox One: The connect button is located around the corner from the slot where you insert games.
Xbox One S: The connect button is located on the front of the console, on the right side, below the power button.
Xbox One X: The connect button is located on the front of the console, on the right side, right next to the USB port.
Once you have located the connect button, press and release it.
Make sure you have your Xbox One controller handy. After pressing the connect button on the Xbox One, you need to immediately proceed to the next step and complete it within 20 seconds.
Also Check: How To Play Bedwars On Xbox
How To Connect Your Xbox One Controller With A Wireless Adapter
You also have the option to connect your Xbox One controller using a wireless adapter. Here’s how:
Step 1: Purchase the Xbox Wireless Adapter.
Step 2: Connect Xbox Wireless Adapter to an open USB port on your PC. Complete the setup process for the adapter as outlined here.
Step 3: Press the Guide button on your controller to turn it on.
Step 4: Press and hold the Sync button on top of the controller until the Xbox logo begins flashing .
Step 5: Press and hold the small sync button on the adapter. The Guide button will flash faster while searching for the pair. Once the Xbox logo on the controller stops flashing and turns solid, youre good to go.