How To Fix Xbox 360 Stuck Disc Tray Easiest Way Ever
How to fix Xbox 360 stuck disc tray, EASIEST WAY EVER!! If playback doesnt begin shortly, try restarting your device. Videos you watch may be added to the TVs watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.
How Do I Fix My Xbox 360 Tray From Opening And Closing
If your disc drive tray is stuck and will not open or close, then you have to manually eject the disc. Follow these instructions to remove the faceplate and manually eject the drive. Remove any obstructions, and plug the console back in. If the eject button still doesnt work, your disc drive may need to be replaced.E
What To Do If Your Xbox 360 Disc Drive Is Stuck
If the disc drive is still stuck closed, insert the paper clip into the adjacent hole and push again. If youre successful, the disc tray will pop out slightly. Plug the power cord into the back of the console. Press the eject button to open and close the disc drive. If the disc drive works properly, reattach the console faceplate.
Don’t Miss: Can You Connect A Xbox One Controller To A Ps4
How To Fix Xbox 360 Disc Tray
Disassembly Pt : The Innards
Now you’ve got that all in your growing “to be washed free of dust” pile, It’s time to remove a couple more things.
First, you need to use a paper clip or similar pointy thin thing to open the disc tray. DO NOT try to rip it open with your bare hands. Of course this will wreck your drive, dummy! There is a small hole just under the tray to stick the clip in. Feel around with it until you hit a gear, then push in to turn the gear. One or two turns will suffice to disengage the locking mechanism. This requires some finesse, don’t be disheartened if you don’t get it off the bat.
Then, pull the tray out until it is at it’s furthest forward point, and pull the small latch on the side.
If you have a different drive, there is usually a similar way to remove the tray, so be careful and try things until you figure it out.
Removing the tray should expose the gears that make the tray move. If you’ve been experiencing trouble ejecting, find the rubber drive belt connecting the motor to the gears and remove it. Save it, you’ll need it later.
Don’t Miss: How To Join A Minecraft Server On Xbox 360
How Can I Get My Xbox 360 Disc To Open
So what youll want to do is first, open the tray and put a disc in. Then close the tray and start gently knocking on the xbox right above where the disc is inside the xbox. Now keep repeating this until it works. It could take a while, but it could not. You might want to try this to for like 5 minutes.
Forcing The Tray Open
Sometimes the tray just needs a little motivation to open, which you can give it with a simple credit card. No, you dont need to spend money for this solution, but if you hear your console click when it fails to eject the disc tray, this trick may work for you.
Inserting a credit card horizontally into the top of the closed disc tray, press the eject button and when the clicking noise occurs bend the credit card back toward the console, applying leverage to force the tray open.
If youre struggling with the credit card method, you can also use your thumbs to snap the faceplate off the front of the console, then use your fingers to tug at the protruding portion of the disc tray as the console clicks after a press of the eject button.
If this isnt working for you, give the next section a try.
You May Like: How To Upload Pictures To Xbox
Why Does My Xbox 360 Say Open Tray
“Xbox 360 open tray error” could be caused by an incorrect disc tray controller calibration. If your Xbox 360 has a warranty, send it back to Microsoft for repair or temporarily fix it. Try to close the disc tray manually so the disc tray controller will recalibrate itself. Make sure your Xbox 360 has no disc.
What Should I Do If My Disc Tray Is Stuck
DO NOT try to rip it open with your bare hands. Of course this will wreck your drive, dummy! There is a small hole just under the tray to stick the clip in. Feel around with it until you hit a gear, then push in to turn the gear. One or two turns will suffice to disengage the locking mechanism.
If your disc drive tray is stuck and will not open or close, then you have to manually eject the disc. Follow these instructions to remove the faceplate and manually eject the drive. Remove any obstructions, and plug the console back in. If the eject button still doesnt work, your disc drive may need to be replaced.
The major contributing factor to a disc read error is a dirty optical lens . If there is dirt or dust on the laser lens, your system will eventually fail to read the game disc. Im sure youre gentle with all of your toys, especially the Xbox.
Also Check: How To Change Your Username On The Xbox App
What To Do If Your Xbox 360 Disc Tray Is Stuck
Open Stuck Xbox 360 Disc Tray 4 ways!!! If playback doesnt begin shortly, try restarting your device. Videos you watch may be added to the TVs watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.
Whats The Best Way To Open An Original Xbox
Part 1: Getting to Know the Case
Don’t Miss: Mods For Gta 5 On Xbox 360
How Do I Eject The Hard Drive From My Xbox 360
Locate the tab on the left side of the tray. Lift the tab with a pen or equal and pull the tray out. Step 3: power on the Xbox 360 and hit the eject button. When you here the eject ding pull the power. Now the drive is in eject mode and the cogs are aligned to take the tray. Gently place the tray back in and slight nudge to engage gears.
Solution : Open Your Console And Clean The Laser
Opening the Xbox is sure to get your off your warranty but it may be the only solution for you to get rid of the error. These types of issues are usually caused by a faulty or dusty laser and you can hope for the best that simply giving it a thorough cleaning will help you solve the issue easily.
Also Check: Why Does My Xbox Series X Keep Turning Off
Why Does Xbox 360 Keep Saying Open Tray
The Open Tray error on Xbox 360 is definitely one of the most troublesome errors you can encounter on your console as its cause is usually related to hardware, rather than software issues, meaning you sometimes really need to have someone to look at it or you need to perform some maintenance carefully.
Why Wont My Game Install On Xbox
The most common cause for installation stopped Xbox One is that your console is trying to download an update for the game while the game is installing. Another common cause is that the game files you saved locally get corrupted. Sometimes the out-of-date console also might cause the problems with Xbox One installation.
Read Also: How To Find My Home Xbox
Fix: Xbox 360 Open Tray Error
The Open Tray error on Xbox 360 is definitely one of the most troublesome errors you can encounter on your console as its cause is usually related to hardware, rather than software issues, meaning you sometimes really need to have someone to look at it or you need to perform some maintenance carefully.
There are quite a few solutions to this problem and you never know which one might be suitable for your situation. If the Xbox 360 is not able to read discs, you are not able to install any new games or even play a game if it requires the disc to be inserted. Follow the solutions presented below to get rid of the Open Tray error once and for all.
Recommended Reading: How To Change Xbox Live Gamertag On Pc
How Do I Fix My Xbox 360 Disc Tray
0:294:27Xbox 360 Stuck Disc Tray Repair Simple Easy Fix (Works YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then put it into a sink. So as long as you have a sink nearby with some running water youreMoreAnd then put it into a sink. So as long as you have a sink nearby with some running water youre gonna need that band in your Xbox youre gonna wanna grab with the tweezers.
Read Also: How To Set My Home Xbox
How Do You Clean Your Xbox 360
How to Clean an Xbox 360
How Do You Fix An Xbox One That Wont Update
Press and hold the Xbox button on the front of the console for approximately 10 seconds. After the console has shut down, unplug the power cord and wait 30 seconds. Then plug the console back in and turn it on by pressing the Xbox button . After the console restarts, try installing the system update again.
Read Also: What Does Mic Monitoring Do On Xbox One
How Can I Fix Corrupted Game On Xbox 360
First, determine whether the game is corrupted. To do this, follow the steps behind. Step 1: Select Settings-> System-> Storage. Step 2: Select the storage location, and then press the A button. Step 3: Select Games and Apps, and then press the A button. Step 4: Select the game and then press the A button.
Also Check: How To Manually Eject Disc From Xbox One
How Do You Open The Tray On A Xbox 360 E
Xbox 360 E. Move the console to a horizontal position and search the vents on the left side of the console for a yellow sticker. Straighten out a long paper clip and insert it into the hole, about an inch and a half. This should cause the tray to open a small amount. Using your hands, grab the front of the tray and open it fully.
Recommended Reading: How To Mod Your Xbox 360
Why Wont My Xbox 360 Tray Stay Closed
If your disc drive tray is stuck and will not open or close, then you have to manually eject the disc. Follow these instructions to remove the faceplate and manually eject the drive. Remove any obstructions, and plug the console back in. If the eject button still doesnt work, your disc drive may need to be replaced.”
What To Do If Your Xbox 360 Wont Start
If playback doesnt begin shortly, try restarting your device. Videos you watch may be added to the TVs watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. Helping the retro gaming community restore and repair their systems via detailed video tutorials.
Read Also: How To Mod Gta 5 Xbox One Without Computer
Solution : Adjusting The Hardware
In some cases, the hardware might get clogged due to the accumulation of certain dust particles inside the Xbox or in and around the cables. Therefore, if you havent tried it already, it is always a good choice to try to clean the Xbox Disc Tray, the Disc, and all the power cords and other cables connected to the console. Make sure to look for any clogged dust particles and remove them to allow for proper airflow and the optimal performance of the console.
The disc that is inserted into the Xbox tray consists of two parts: one on which the disc spins and the second one is the laser which is used to read the disc. Sometimes an error occurs and the laser gets dragged out of its original position towards the outer edge of the disc drive. Therefore, you just need to get the laser back into its initial position and the error would get fixed. Be cautious and do not touch the upper top of the laser because this part comes in direct contact with the disc from where it reads the data.
Why Is My Xbox 360 Controller Flashing And Not Connecting
This may mean one of the following: The Xbox 360 Wireless Controller batteries are weak, or the Xbox 360 Rechargeable Battery Pack needs recharging. Another wireless device, such as a microwave oven, a cordless phone, or a wireless router, is causing interference. Four controllers are already connected to the console.
Don’t Miss: How To Add Pc Friends On Ps4 Fortnite
Manually Eject The Tray
Start off by shutting down the console and removing all the cables plugged into it. Then, securely holding the console, use your thumbs to pull the faceplate off the front of it.
With the faceplate off, insert a paper clip into the hole underneath the disc drives right side and push until some resistance is felt. This should cause the tray to pop out a bit, and you can open it the rest of the way with your hands. If this worked for you, skip the next paragraph, otherwise theres one more thing you can try.
There are two more holes underneath the left side of of the disc tray. Insert a paper clip into the leftmost hole and push until you feel it hit something. If you pushed the internal gear correctly the disc tray should open slightly, and you can pull it out fully with your hands.
With the tray now open, make sure the disc inside isnt sticky and causing the problem. Then plug the console back in and see if the tray is back in working condition. If not, reopen the disc tray the same way and move on to the next section.
Does Turning Off Your Xbox One Make Downloads Faster
If you are playing a game or doing other things with the console that will slow down the downloading process but having your Xbox off will not increase the download speeds. The downloading speed of your Xbox can slow down if you are using the device and keeping something downloading at the same time.
Recommended Reading: Xbox Controller Keeps Disconnecting
Cleaning The Internal Mechanisms
Dont worry, you wont have to open up your console any more than you already have to try this potential solution. A video of this method is available here.
One of the main mechanisms for opening your 360s disc tray is a simple rubber band. Holding firmly onto the open disc tray,use a small pair of tweezers or something similar to reach into the tray and grab the rubber band stretched around two rotating cylinders, making note of exactly where the band is. Be very careful to ensure the disc tray does not close, as it would be difficult to reopen without the rubber band in place.
Using rubbing alcohol and a cotton swab, gently rub the alcohol over the surface of the band, getting the grime and dirt off. Using the same products, gently rub the cylinders the rubber band was on, slowly opening and closing the disc tray while doing so to rotate the cylinders. Then use another cotton swab to ensure the cylinders and rubber band are dry.
While holding the tray open, carefully rewrap the rubber band back around the cylinders they were on.
With any luck the newly cleaned opening mechanism will solve your disc tray issue.
How To Open Stuck Xbox 360 Tray
Don’t Miss: How Much Does Save The World Cost