How To Increase Max Level In Ark Xbox One

What Is The Lost Ark Roster Level

Lost Ark second level feature is the Roster level. The Roster level is a new name for the western audience, which was previously called expedition level. This is a massive account-wide level system that makes it easier for you to level your alts up. As you level your roster level, you can get your hands on some amazing buffs. For example, you can expect Vitality buffs to all your characters, and get primary stat increases too. It means that your alt characters will have a much better time playing the game.

If you see expedition level or account level, know its the same thing. The account level goes up whenever you do anything in-game, albeit much slower than your characters XP. As you climb higher and log in for consecutive days, you can earn more. It will eventually award your premium currency, in-game currency and other rewards for sticking around and being a loyal player. At this present moment in time, the Lost Ark roster level is capped at 250, which means theres plenty of passive roster XP to earn for the months to come.

Featured image via Smilegate.

Adding Engrams To Your Code

• You will use OverridePlayerLevelEngramPoints=#NUMBER OF POINTS# to add custom engram points to your code.
• It is suggested to place the engram code at the bottom on the line after your experience ramp override.
• You will need to account for level one. You can have OverridePlayerLevelEngramPoints=0 as a place holder.
• If you have 100 levels, you will need 100 entries if you want to gain engrams at each level.
• In this example a player can get to level 5 and can earn 60 engram points. 15 points each level:

LevelExperienceRampOverrides=OverridePlayerLevelEngramPoints=0OverridePlayerLevelEngramPoints=15OverridePlayerLevelEngramPoints=15OverridePlayerLevelEngramPoints=15OverridePlayerLevelEngramPoints=15

Allow/disallow Player To Join No Check

• admincheat AllowPlayerToJoinNoCheck < steamid> or < psn id=””> or < xbox id=””> < /xbox> < /psn> < /steamid>

• admincheat DisallowPlayerToJoinNoCheck < steamid> or < psn id=””> or < xbox id=””> < /xbox> < /psn> < /steamid>

This will either allow or remove a player from the server whitelist. Those on the whitelist do not need to enter the password upon entering the server.

Recommended Reading: How To Hack On Xbox

There Are Three Sections To The Lines Above

PerLevelStatsMultiplier_Player=1PerLevelStatsMultiplier_DinoTamed=1PerLevelStatsMultiplier_DinoWild=1

• Look near the end of each line to see what they affect: Your player characater’s stats, your tamed dinos stats, or wild dinos stats.

• Dino stats multipliers will effect the amount that taming bonuses, “wild levels”, and even mutations add. These are all just various kinds of “level ups”, so if you increase the amount they gain per level up, they gain higher stats for each increase.

• Each section has 12 lines, a line for each separate stat in the game you can change.

Difficulty Value And Difficulty Offset

Instead of fixed difficulties such as Easy, Medium, and Hard, the difficulty is expressed using a number currently between 0.5 and 4.0 . This number is known as the Difficulty Value and is controlled by the DifficultyOffset option. The Difficulty Offset is a floating point number with a value between 0.01 and 1.0, with a higher number representing a higher Difficulty Value. Note, however, that setting the Difficulty Offset to 0.0 will result in a Difficulty Value of 1.0. The default value for DifficultyOffset is 0.2.

To calculate the Difficulty Value for a specific Difficulty Offset, use the formula

Difficulty Value = DifficultyOffset *  + 0.5

and round to one decimal. To calculate the Maximum Creature Level for a given Difficulty Value, simply multiply by 30.This works because the Maximum Creature Level scales linearly with the Difficulty Value, and a Difficulty Value of 1.0 results in a Maximum Creature Level of 30.) To find a Difficulty Offset given a Maximum Creature Level, use this formula:

DifficultyOffset =  / 

Finally, the Loot Scale is simply the Difficulty Value expressed as a percentage:

Loot Scale = Difficulty Value * 100%

You May Like: Gta V Xbox Mods

Ark: Survival Evolved How To Increase Max Level

Increase Character Levels and Tamed Dinos Levels

Leveling up in Ark is the main method of unlocking engrams, learning new skills that come with varied items, and improving your stats, as well as your dinosaurs stats. That being said, its quite clear that leveling up is essential. The maximum achievable level in Ark Survival Evolved is 180. The first 104 levels can be achieved by playing in a classic way. The good news is that its possible to modify the max levels default value by accessing the servers Game.ini configuration file.

How it works:

• Use a simple word document/ text editor to write the code
• Go to Expert Mode Settings on Nitrado. It will allow you to edit the files. Dont worry. It can be disabled again from the box under Settings.
• Write the code:
• Use this sequence at the start of your code: LevelExperienceRampOverrides=
• The next step is to write lines using this model: (ExperiencePointsForLevel=10. Dont ignore the parenthesis and the coma used. Its important.
• Write as many lines as wanted level , customizing the experience points needed for each of them after your wishes.
• Insert the new code at the bottom of the Game.ini file.
• Save the changes and start your server

Auto Decay And Destruct Structures

To cleanup old structures and tamed dinos, a server can enable Auto Decay and Auto Destruction. Structures and Dinos have their own decay / destruct timers, with tamed dinos having an additional setting that allows them to be claimed after a set time. These timers will count down unless a tribe member is in close proximity and has the structure within “draw” distance. However, if a tribe member is not nearby, the timers for the structure or tamed dino will start counting down.

Auto Decay – The amount of time until a structure is available for demolishing by a player.

Auto Destruct – The amount of time, after Auto Decay has expired, until a structure will be automatically demolished.

Each structure is categorized into one of four classes, per building type, each with their own decay/destruct time variables. By default, these are the times per each building type.

Thatch – 4 days

Stone – 12 days

Metal – 16 days

Turning on Auto Decay and Auto Destruct for your server can help improve performance and clean up old buildings scattered across the server. To turn this setting on, click on the Advanced Launch Params button on your control panel and look for the setting shown in the screenshot below. Check the box and scroll down to the bottom of the pop-out window and click the button to save settings and resatrt your game server.

DisableStructureDecayPVE=false

More info on this coming shortly

You May Like: Make A Blizzard Account

Table Of Common Difficulties

ARK: Survival Evolved Mobile offers four levels of Difficulty:

• Easy Difficulty, where Creatures spawn at a level range of 1-30, excluding cave dwelling Creatures, and Experience is gained at 100% of the standard rate. Tamed Creatures can be a maximum level of 450.
• Medium Difficulty, where Creatures spawn at a level range of 5-150, excluding cave dwelling Creatures, and Experience is gained at 80% of the standard rate. Tamed Creatures can be a maximum level of 450.
• Hard Difficulty, where Creatures spawn at a level range of 10-300, excluding cave dwelling Creatures, and Experience is gained at 50% of the standard rate. Tamed Creatures can be a maximum level of 450.
• Brutal Difficulty, where Creatures spawn at a level range of 15-450, excluding cave dwelling Creatures, and Experience is gained at 5% of the standard rate . Tamed Creatures can be a maximum level of 600.

Build A 22 Base & Make Forges

Now that you have reached level 20, you can start to look at getting metal tools, the first thing you are going to need to do is to create a couple of forges, so its back to killing for hide again.

Once your forges are created, start looking for smooth gray-looking rocks around rivers, hitting these with the stone hatchet have a chance of giving you metal, keep going till you have 10 metal.

Once you have 10 metal, which will then smelt down to 5 ingots, you can create yourself a smithy, build the smithy and get back out for more metal to make yourself metal tools.

Once you have your metal tools, go back to building rafts again until you hit level 24.

You May Like: How To Jtag Xbox 360 With Usb Flash Drive

Set Crop Growth Speed To 20

Crops will grow faster and fit in with the overall pace

Allow Custom Recipes

Disabling this means you wont be able to make and savor your favorite dish!

Allow Raid Dino Feeding

This setting is to ensure that unofficial Raid Dinos do not starve to death like they usually do. However, it is hard enough taming these beasts. Treat yourself and ensure they stick around in Ark Single Player!

Example Code For Player Level To 136 And 8333 Engram Points

• You will need to place the code at the bottom of the game.ini file:

• Save Changes
• Start your server and the changes will be applied

The code below raises the maximum player level to 136. It also will grant additional Engram points as you level, allowing you to learn essentially everything.

< Spoiler>

< /spoiler>

Also Check: How To Set Xbox One As Home

Difficulty And Wild Dino Levels

Both loot and wild dino levels are calculated by two variables: Difficulty Offset and Override Official Difficulty . When adjusting the level for the dinos on your server, it’s best to stick with the Override Official Difficulty values. The formula for calculating dino levels is as follows:

Maximum wild dinosaur level = Override Official Difficulty x30

Difference in wild dinosaur levels = Override Official Difficulty

For example: An Override Official Difficulty value of 10 will result in a maximum wild dino level of 300, with levels being 10, 20, 30, etc. The only exception to this rule is when it comes to wyverns and boss monsters, as the maximum level can be “x30”, so an OOD value of 30 can result in a level 330 wyvern.

How To Increase Max Level In Ark Xbox One

ARK: Survival Evolved is still a very popular survival game that collects regular updates and expansions on top of the absolutely massive game that already exists. However, ARK is also notoriously demanding, especially on aging console hardware like the OG Xbox One or One S, which can barely play the game at a 720p resolution. Today, ARK: Survival Evolved is releasing an update for the game that enhances the title for the upcoming Xbox Series X, netting a huge number of improvements ahead of the console’s launch on November 10, 2020.

The side-by-side comparison in the above trailer shows just how impressive this update is, with ARK: Survival Evolved looking like two completely separate games from Xbox One to Xbox Series X. In some ways, ARK: Survival Evolved squeezes more out of the Xbox Series X even than gaming PC’s, which is an interesting note. Improvements included in ARK’s Xbox Series X update include:

• 4K resolution at 60 to 30fps
• Increased draw distances
• Increased level streaming distances
• Sky and atmospherics quality set to Epic
• Subsurface scattering quality set to Epic
• Infinite-range high precision screen space ambient occlusion
• Max texture resolution
• Dynamic shadow quality set to Epic
• Ground clutter distance set to Epic
• High-precision HDR output
• Postprocessing quality set to Epic
• Tetherless non-dedicated hosting
• Splitscreen multiplayer uses Epic graphics settings
• Loading speeds increased by seven times

You May Like: Can I Connect My Airpods To My Xbox

Changing Stat Points Gained Per Level On Your Ark: Survival Evolved Server

This guide will show you how to increase the amount of points that your character receives whenever you spend points you gain from going up in levels.

To change this, you will need to add some settings to the game.ini config file.

• You can normally find this config file in ShooterGame/Saved/Config/LinuxServer/ in the file manager tab of the Nodecraft control panel.

• To edit the file, click on the box to the left of the file game.ini, and then click the Edit button near the top of the file manager. This will open a file editor directly in the file manager window.

• Copy and paste the lines below into the config file.

• Edit the numbers after the equals signs to change the multiplier. Don’t change any other part of the lines. The lines shown below all end in 1, which means normal values, with no changes. The following sections tell you what lines affect what stats, and how much they increase it by.

• Saves the changes to the config file, and restart your server.

What Is Lost Arks Max Level Cap

Technically the Lost Ark level cap is level 60. The game gained an extra ten levels sometime in T2, when the devs over in Korea decided that an extra ten levels with plenty of skill points to earn. However, the actual end game begins at 50. You will just grind that final ten levels over time, earning plenty of skill points for your tripods along the way. Just be aware it is a long grind before you get there, so dont sweat too much over it.

As for the time it takes to level up, you can expect the 1-50 should see you get to max roughly around 24 hours played. But, one player in Korea has posted it took him around ten hours to speed run the adventure mode. It all comes with being able to come to funnel your gear, dodge all the unnecessary side quests, use grenades, speed options and of course have perks from your roster level.

Also Check: Xbox One Controller For Ps4 Adapter

Supply Drops And Beacon

An easy way to modify supply drops across the various ARK maps can be done with a handy application named Beacon. Beacon offers a simple user interface to help customize drops on the various maps as well as differentiating between normal/bonus supply drops.

Below is an “Editor’s Choice” of supply drop additions for The Island, Center, Ragnarok, and other maps that use the default supply drops. While this is subject to future modification, the beacon code does two major things:

Simply copy and paste the below code, removing any empty lines and any colons affixed to the “Config” word in each line, into your Game.ini file and restart your game server. You may need to shut down your server first before making edits to your config files.

What Are Ark Commands

Admin commands or “cheat” commands are used in either single-player mode or a private server . In order to enter ANY command, first, the player needs to make sure they have the correct permissions on the server they are currently playing. This can be found either in the server settings or through the use of an admin password.

On previous versions of the game, an admin command bar was present at the top of the start menu, but due to recent updates , a combination needs to be input simultaneously in the start menu to activate the admin command bar.

PS4 = L1 + R1 + Square + Triangle

Xbox One = LB + RB + X + Y

Once you have the admin command bar you can input admin commands below.

Commands which are written in < …. > are just to provide information and examples. Do not include the < or > when entering the password, only the text or value within it. Also, some codes may or may not require “admincheat” at the start so if you do not see the desired outcome try to add or remove this from the command bar.

• setcheatplayer false

When “true” is entered cheat commands are enabled and when “false” is entered cheat commands are disabled.

Recommended Reading: How To Connect Airpods To Xbox

Increasing Difficulty In The Gameusersettingsini Config File

The difficulty level settings are found in the GameUserSettings.ini config file, which is located in your server files under ShooterGame/Saved/Config/LinuxServer/GameUserSettings.ini.

The difficulty value is determined by the formula: DifficultyOffset * + 0.5

DifficultyOffset=1.0OverrideOfficialDifficulty=5.0

The Number At The Very End Is The Actual Multiplier

PerLevelStatsMultiplier_Player=1

• 1 is standard multiplier

• lower numbers decrease the amount gained.

• higher numbers increase the amount gained

Examples:PerLevelStatsMultiplier_Player=3 = Your player gains 30 lbs. of carry weight, instead of the normal 10 lbs.

Some extremely high multipliers will cause issues with Ark. To avoid crashing, the game simply deletes the whole game.ini file and replace it with a default stock one. We recommend that you make copies of the text inside your game.ini config file before you save it, in case this happens. Reduce the settings until the game stops replacing the file.

Recommended Reading: Gta 5 Mod Menu Xbox 1