Ways To Fix Xbox One Controller Wont Connect Error
Its the weekend, and you are about to begin one of your manic gaming session, and out of nowhere, you find that your nifty Xbox One Controller wont connect.
The Xbox logo keeps on flashing, and the connection keeps dropping intermittently. The controller might keep on randomly disconnecting. I know, its frustrating as hell.
You might have tried Microsoft Troubleshooting, and soon realized that it is all but a joke. Well, fret not. Here are a few solutions you can do to get your controller up and working. These are pretty easy to perform. Give one of these a try. If you want to remove your credit card from xbox one, .
If Your Xbox One Controller Is Blinking
If you press the Xbox button on your controller and it blinks or flashes, this usually indicates that your controller isn’t paired to a console. As mentioned above, this can happen when you pair the controller to another system. But it can also occur due to various glitches.
Follow our guide showing how to sync an Xbox One controller to your console to get yours connected again.
If your controller won’t pair using the buttons, try using a USB cable to pair it. Simply plug the cable into a USB port on your console and connect the other end to your controller, then hold the Xbox button on your controller for a few seconds.
If this fails to solve the problem, you should restart your console. Press and hold the power button on the front of your system for 10 seconds to fully power it off. Then press it again to turn it back on. After a power cycle of both your console and controller, you should be able to pair them without it flashing.
If it keeps blinking and turning off after this, your controller may have a hardware issue. Try another controller with your console and see if you have the same problem, or test your controller with a friend’s Xbox or another device like a PC.
Contact Xbox Support if you can’t get the controller to under any circumstance. In the meantime, be aware that you can press and hold the Xbox button on your controller for several seconds to turn it off. This can help conserve battery if it just keeps flashing during your troubleshooting.
How To Fix An Xbox One Controller That Won’t Turn On
Here are some troubleshooting tips and solutions for a range of Xbox One controller issues:
Check the batteries. Remove the battery compartment on the back of the controller. Remove each battery and verify it’s inserted in the correct direction. If it was installed incorrectly, put it back in the correct direction. If both batteries are installed correctly, install a pair of new batteries.
Don’t take batteries out of a different device. To be certain the problem isn’t the batteries, use a brand new pair right out of the package, or a pair of freshly charged ones.
Check the battery contacts. Instead of using springs like some electronic devices, the Xbox One controller uses metal tabs that bend in slightly when you install the batteries. These tabs can become permanently bent if too much force is applied, and can get stuck or weaken over time. Remove the battery cover and the batteries, and examine the contacts on the right side of the compartment. The contacts should extend at an angle. If either is bent in, use a small screwdriver or another prying tool to bend it back out carefully.
Don’t attempt to pry the contacts with the batteries installed. Don’t apply excessive force. If you’re uncomfortable with this, ask someone who has more experience with this type of work for help.
Don’t Miss: Does Razer Nari Work On Xbox One
Option 2 Replace The Broken Bumpers With New Parts
You can very easily fix your broken Xbox One controller bumpers by buying new ones and swapping them out.
Not only is this easier and more reliable than trying to fix your broken bumpers, but it also allows you to customize your controller with new colors and designs.
You could even paint your Xbox One controller buttons while youre at it.
What You Need to Replace Xbox One Controller Bumper
Youll need to open your Xbox One controller, as with most Xbox One controller repairs, and swap the bad bumper out with a new one.
We recommend making sure the replacement bumpers you order are the correct buttons for your Xbox One controller model, as multiple new models have become available since writing this article.
Dont Throw Your Controller Away It May Be Salvageable
Jeremy Laukkonen is automotive and tech writer for numerous major trade publications as well as the creator of a popular blog and video game startup. A fan of EVs since the early 2000s, he stays up-to-date on the myriad complex systems that power battery electric vehicles.
When an Xbox One controller starts suffering from drift, youll typically notice unwanted movement while playing games. Its called controller drift, or analog stick drift, because one or both thumbsticks will drift, or move, in an undesired direction even when you arent touching them.
To fix Xbox One controller drift, you need to take the controller apart and repair or replace one or more components related to the analog sticks.
Don’t Miss: Where To Sell Xbox 360
Pair Your Xbox One Controller To Your Console Again
To stop your Xbox One controller from blinking and pair it to your console, just press down on the pair button on your Xbox One console and then release it, and within 20 seconds, hold down the corresponding pair button on your controller.
The controller should flash more rapidly for a moment, then display a continuous light. When that happens, it’s paired.
Remove Connected Xbox Accessories
Sometimes Xbox One accessories, attached either to the controller or console, can introduce connection issues.
If you have an external hard drive, keyboard, or similar peripheral connected to your Xbox, try disconnecting it and then attempt to connect your controller again. Do the same for the Stereo Headset Adapter on your controller, if you have it.
If you’re trying to sync your controller using a USB cable, make sure you’re using a high-quality cord. Low-quality or damaged cables may not work correctly.
Read Also: How To Find Someones Ip Adress On Xbox
Try A Different Console
If all these above steps fail, and your Xbox One Controller Wont Connect, try connecting another controller to your console. Play for a couple of minutes to test the second controller.
If the second controller works fine, your original controller is probably faulty, and you perhaps need to replace it. Head over to your Microsoft account, go to Device Support and request a replacement controller.
If the connection error exists on both the controller, the fault may be with your Xbox controller, and you need to service it.
Remove Any Interfering Objects
The Xbox Controller works fine up to a distance of 6 m or 19 ft from the console. However, your Xbox One Controller Wont Connect when specific devices cause some electromagnetic interference with your console.
You should remove any such objects that might be interfering with the connection. Once you have kept these articles at bay, try connecting your controller.
Read Also: Why Is My Xbox Controller Not Working
Use Your Spare Controllers
If you have another controller available, try swapping it for your unresponsive Xbox controller. If that solves your issue, the problem lies with the original controller. If you still cannot move, you need to check your Xbox, as there may be an issue with the Network Interface Controller card.
If the issue lies with your Xbox, you can see if a hard console reset solves the problem.
If the problem persists and your console is still under warranty, you should get in touch with Xbox, your distributor, or the retailer to get it fixed or replaced.
Invisible Or Unknown Hardware Malfunction
Internal hardware faults or damage in the controllers board that you cant see can also cause a problem. This usually happens if you drop the controller or get it wet. Even though the controller may look fine externally, a broken component inside may cause an electrical short in the tiny board inside and cause other parts to fail completely.
Read Also: How To Get Gta Mods On Xbox One
How To Fix Worn Out Xbox One Controller Thumbstick Springs
If you still experience drift after attempting to fix your thumbstick pads or determine that they were neither dirty nor loose, then the next easiest fix is to replace your thumbstick springs. If only one thumbstick is giving you trouble, only replace the springs on that thumbstick.
To perform this fix, youll need:
- Prying tool
- Analog stick springs
A lot of controllers, including Xbox 360 controllers, use the same analog stick component as the Xbox One controllers, so you can take springs from an old controller. You can also buy a replacement analog stick and take the springs from that.
Heres how to replace the springs in an Xbox One controller analog stick:
Disassemble your controller using a pry tool and T-8 or T-9 safety Torx.
Carefully pry off the green plastic covers on the bottom and right side of the thumbstick assembly.
If you break either plastic cap, you will have to replace the entire analog stick module, which requires soldering.
Remove the springs.
Reassemble your controller and test operation.
What Causes Xbox One Controller Not Working On Pc
According to the reports from users, we found that there are several common situations when the Xbox One controller not working on PC issue happens. Some users received the error message USB device not recognized Xbox One controller on PC or Xbox One controller not connecting to PC and etc.
For these problems, there 4 common causes below:
- Your Xbox One controller gets outdated. You can resolve this issue by updating it.
- Your Xbox One controller driver gets corrupted or missing.
- The USB cable may not be compatible with your controller.
- Sometimes the PC not detecting Xbox One controller issue can occur because of your USB port. You can try connecting your controller to USB port on the back of your PC to resolve this problem.
Now, lets see the detailed steps about how to fix the Xbox One controller not working on PC.
You May Like: How To Set As Home Xbox
How To Fix A Broken Bumper On Xbox One Controller
Guide to fixing stuck bumpers on the xbox one elite controller.How to fix a broken bumper on your xbox one controller (lb.I also have not dropped it once, it just came randomely.I apologize for the bad photograph, but all youll need is the name of the bit anyway.
I had that happen, took the controller apart and found the bumpers were still intact.I have 3 xbox ones and 3 elite controllers and one of them has a broken right bumper as well.I have opened up many controllers but not an xbox one controller.I purchased the 3 controllers in january of this year so they are out of warranty.
I think what happened was the metal bracket that holds the button in had become bent.I tried a similar fix with mine.I tried several pieces of plastic and other materials as a replacement and none seemed to work.I was just wondering if this is a fixable provlem and if it is common.
I was playing a game of modern warfare when my left bumper started to not respond half the time.I was playing assassins creed 4 and pressed the right bumber to use my spy glass and it wouldnt work.Im at work otherwise i would provide a link, but search for xbox elite bumper replacement on amazon or ebay and it should pop up.If it does have this then its probably the internal pads that lie between the bumpers and the internal buttons, i bet that it tore.
Fix: Xbox One Controller Wont Connect To Pc
Its a well-known fact that controllers from different platforms and consoles can be used on others as long as certain steps are undertaken beforehand. For example, it would be a shame if someone had to buy additional controllers for his PC when he already has a couple of PlayStation 3 controllers lying around.
Fortunately, there is a way to make them all compatible with each other and sometimes you need to use an adapter and sometimes you dont. The most important issue users want to fix is making various controllers compatible with their PC. This process is not difficult but its outcome is not so certain.
Xbox One is a relatively new console manufactured by Microsoft and its natural to expect that its controllers are going to be compatible with Windows PCs. That is true and there are ways to connect your Xbox One controller to your computer either by using a Bluetooth connection, an Xbox one adapter or by using a micro USB cable. You should stay aware of the fact that Bluetooth connection only works if you use Windows 10 with Anniversary Update installed. If you own any other operating system, you will need to connect your controller using a micro USB cable.
You May Like: How Much Does An Xbox 360 Weigh
Xbox Controller Doesnt Turn On
If the controller doesnt turn on, the first thing you should make sure of is that the battery has not passed a better life. Remove the back cover and remove the battery to replace it with a pair of AA format batteries to rule out that the controller has been damaged if it turns on with batteries then it is ok and the problem is with the battery.
If even changing the battery or putting batteries in still does not turn on, it may be damaged. Anyway, try connecting it in this case by cable to be able to rule this problem out entirely.
Solution : Disconnect Other Connected Controllers
Everyone fancies having lots of exquisite controllers. If you have many controllers connected to your console at the same time, then you wont be able to connect any more controllers after the eighth one. In such a case, you will have to disconnect the other controllers by pressing the Xbox button and selecting Controller Off on the screen. Afterward, continue with connecting the controller you have been trying to connect.
You May Like: Connecting Bluetooth Headset To Xbox 360
How To Fix Xbox One Controller Wont Sync
Are you having an issue with your Xbox One controller that wont sync? Well, youve come to the right blog. In this article, well show you the ways to easily fix your problem.
An Xbox One controller can continue working for years because theyre built with durability in mind. However great the hardware though, some Xbox One users may experience a rather frustrating problem: a wireless controller that wont pair. If youre one of the unlucky users with this problem, learn what you can do by following the solutions in this post.
Xbox One Controller Doesnt Connect
The most common problem is that the controller refuses to connect wirelessly, either to the Xbox One console itself or to the PC if you use the wireless adapter that Microsoft sells for it. First of all you should know that if you are using it on a PC, for some reason Microsoft limits the maximum number of controls connected to the PC to 8, so if you have more, the ninth will not work.
It will seem improbable to you that nobody has 9 controls on PC, right? The problem is that when you disconnect a controller, it has been caught and when you connect it again, it detects it as if it were a separate controller. To do this, access the Windows Control Panel -> Devices and Printers and check if you have more than one controller connected.
If you have more wireless controllers or adapters in your account, obviously you should remove them.
Don’t Miss: How To Hear Game Chat On Twitch Xbox One
Update The Xbox Controller Firmware
Your Xbox One controller actually has its own firmware that receives updates at times. While it doesn’t get these updates often, corrupted or outdated firmware could cause disconnection issues.
If your controller is functional, you can update it by tapping the Xbox button to open the Guide while your system is on. Go to Profile & system > Settings > Devices & connections > Accessories.
Select your controller, then choose the three-dot button and hit Firmware version to check for updates.
Solution : Using A Usb Cable
If your issue persists even after trying the solutions given above, then in such a case you will have to give up the wireless functionality of your controller and use a USB cable to connect it to the console. If it works just fine, then there is some problem with either your controller or your console.
If you are curious, you can try connecting your controller to another console to locate the issue. In case the controller connects just fine, then this means theres some issue with your console. If it doesnt, then the problem is with your controller.
Recommended Reading: How To Connect Airpods To Xbox One Controller