Thursday, May 12, 2022

How To Fix Lb Button On Xbox One Controller

Don't Miss

How Do You Clean A Sticky Controller

Xbox One controller bumper button fix| LB/RB switches not registering?

How to Clean Sticky Game Controllers

  • Unplug your game controller. Mix equal parts white vinegar and water in a bowl.
  • Dip a cotton ball in the diluted vinegar solution, and squeeze out excess moisture.
  • Moisten the tip of a cotton swab in rubbing alcohol.
  • Dry the video game controller with paper towels.
  • Removing The First Pcb

    There are two PCBs in there, which are connected to each other through some headers. Now, to get the first out, we need to un-solder the vibration motor cables, and then remove the two screws holding it in place.

    There are four motors to un-solder, which means that there are 4 pairs of two cables. They are easily identifiable:

    Using your soldering iron, heat-up the solder area until you can pull the wire out of the PCB. Repeat this for each wire. If you feel like you don’t know enough about soldering, there’s a nice video on YouTube about it :

    Congratulations You’ve done the hardest part ! Now that you’ve removed the cables, let’s remove the two screws holding the board in place using the TR6 screwdriver:

    After removing the screws, you’ll see that the board stays in place. It does because of the connectors between the first and second board. To remove it, you must pull gently the first board around the two hidden connectors:

    With that first board removed, you should end up with something like this:

    Note that the jack isn’t soldered. It’s normal that it moves. It just sits between the two boards, and makes contacts with the first board. Don’t forget to place it back when you reassemble the controller !

    Take Apart Xbox One Controller And Clean

    Your second option is to solve a sticking gaming controller button is to take the device apart. You should only attempt this if you have some experience in tearing down electronics, as this process requires removing the motherboard of the controller. If youre interested in learning how to take apart Xbox one controller or how to take apart PS4 controller, use these extremely thorough teardown instructions from iFixit. Youll need several different sized screwdrivers and a few other tools that you can also buy through iFixit.

    Also Check: How Much Does Save The World Cost On Xbox

    Why Are My Buttons Sticky

    The most common reason for sticky gaming controller buttons is a build-up of dirt and dust mixed with hand oils. Crumbs from game-time snacks and liquids that have come in contact with the controller, that can contribute as well. Not a pretty mental image, we know, but there are ways that you can clean out this gunk so that your buttons are working like new again.

    Option 1 Super Glue Bumper Back Together

    Xbox One Controller

    The easiest way to fix a broken bumper on your Xbox One controller is by super gluing the broken piece back together.

    Most of the time, the break is clean and gluing the piece back together works.

    In some cases, where the bumper has shattered or the broken piece is missing, you may need to skip ahead in the article and learn how to replace the bumpers on your Xbox One controller.

    What You Need to Glue Your Bumper

    In our experience, brute force usually snaps the arm that connects the bumper to the circuit board. The design is poor, and newer Xbox One controllers have a better and more durable design.

    Youll need to re-glue the piece together using superglue, being careful to make sure it lines up properly and sits flush against the part of the broken bumper.

    If these parts are severely damaged or dont sit flush youll need to buy a new set of Xbox One controller bumpers and swap them out.

    Use a small dab of superglue, making sure that the sides of the two snapped pieces are clear of any residual glue the area where the bumpers sit in the controllers is tight, and any additional mass could interfere with how the bumper works.

    If youre not precise in re-gluing the piece, the broken plastic arm on the bumper wont be able to generate the force needed to engage the button on the circuit board. It might work, but the results are less than satisfactory.

    Read Also: Ps4 Gta 5 Usb Mods

    Why Is My Xbox One Controller Button Not Working

    This post outlines the process of my Xbox One controller bumper repair. There are many things that could cause problems with the bumper button. Heres a short list of possible problems, and how to fix them. Dust or gunk built up around the button. This would prevent the button from being pressed correctly.

    Rubbing Alcohol And Cotton Buds

    A simple, non-invasive approach, this combination can be effective if you are just starting to notice some stickiness. It is likely that a minor clean will be sufficient to remedy your problem.

    • Make sure your controller is unplugged.
    • Dip the cotton bud into the rubbing alcohol, and rub off any excess. You dont want too much.
    • Rub the cotton bud around the sticking button, and get as far into the crevices as you can. The alcohol will help to break down any gunk that has built up.
    • After going around the button several times, press the button repeatedly, to allow the alcohol to work its way further into the mechanism. Pressing should also help to loosen any residual dirt.

    Leave the controller to dry. Rubbing alcohol should dry relatively quickly, and the small amounts you are using should not do damage to the internal circuitry of the controller.

    Don’t Miss: How Much Does An Xbox 360 Weigh

    Option 2 Replace The Broken Bumpers With New Parts

    You can very easily fix your broken Xbox One controller bumpers by buying new ones and swapping them out.

    Not only is this easier and more reliable than trying to fix your broken bumpers, but it also allows you to customize your controller with new colors and designs.

    You could even paint your Xbox One controller buttons while youre at it.

    What You Need to Replace Xbox One Controller Bumper

    Youll need to open your Xbox One controller, as with most Xbox One controller repairs, and swap the bad bumper out with a new one.

    We recommend making sure the replacement bumpers you order are the correct buttons for your Xbox One controller model, as multiple new models have become available since writing this article.

    Take Apart The Xbox Controller

    XBOX ONE Controller LB RB button repair, STEP By STEP

    If rubbing alcohol hasnt resolved the issue, and you feel brave, you can take apart the controller, and give it a thorough clean from the inside out.

    This is a much more sophisticated job, and will almost certainly void any warranty you might have, so do bear that in mind. Of course, if the controller is out of warranty, or so stuck it is unusable, then you may feel you have nothing to lose by trying this method.

    There are lots of tutorials online, such as this or this. This is not for the faint-hearted, and you want to make sure you have all the right equipment before getting started.

    Don’t Miss: Xbox One X Vertical Without Stand

    If Your Computer Keeps Scrolling Up You May Have A Stuck Lb Button

    Dropped controllers or a dirty button may cause this issue.

    Clean the crevices around the button gently with a toothpick dipped in isopropyl alcohol until you pop the button back out.

    If you know how to handle a soldering iron, you can replace a drifting joystick yourself. These repairs will void your warranty and may lead to painful blisters if youre not careful.

    You May Have A Sticking Issue

    Spilled drinks, dirty fingers, or dust can all gum up your controller.

    Cleaning your Xbox controller regularly with gentle strokes of soft microfiber cloth will help avoid sticking issues.

    Pay special attention to the grip zone where you hold the computer.

    If your controller is especially dirty, you can spray a small amount of isopropyl alcohol mixed 50:50 with water on your cloth.

    Short bursts of compressed air can blow out the dust, fibers, pet hair, and other unwanted grime.

    Moisten a cotton swab with isopropyl alcohol and clean all buttons, thumbsticks, D-pads, and triggers.

    If the problem persists, you can open the Xbox controller for internal cleaning. Be advised that this will void the warranty and may lead to further damage.

    Don’t Miss: How To Find Someones Ip Adress On Xbox

    Let’s Tear Down This Controller

    Just a little disclaimer before starting: This will completely void your warranty, and, obviously, I can’t be held responsible if you break your controller while following this page’s instructions, you’re doing this at your own risk.

    The tools you’ll need:

  • A security Torx TR8 screw driver
  • A standard Torx TR6 screw driver
  • A soldering iron
  • Some cleaning alcohol
  • And, for the most organised / tooled, a magnetic mat for the screws
  • I’m personally using an iFixit screwdriver kit that contains everything you’ll ever need to repair this kind of electronic devices. If you want to know which one I used, please let me know in the comments.

    Fixing Xbox One Elite Controller Sticky Buttons

    How to fix a stuck LB/RB Button (Xbox One controller ...

    When Red Dead Redemption 2 was released, my best friend bought it and she enjoyed it so much I wanted to play with it too. But my Xbox One hadn’t been started in months, and it took a while to update the beast. After installing the game, I took my favorite controller, which is my Xbox One Elite Controller. It’s a fantastic piece of electronics, although a bit expensive if bought without a discount.

    While playing, I immediately felt that something was wrong. The A, B, X and Y buttons where all a bit sticky. It felt like the buttons weren’t getting back up until all the pressure was removed . Usually, you could keep your fingers on the buttons, and just apply more pressure to activate them, but not this time. This drove me a bit crazy, because in some games you really need some reactivity, and the controller just wasn’t cutting it anymore.

    Also Check: Adjust Xbox One Screen Size

    What Causes Sticky Xbox Controller Buttons

    The most common cause of sticky buttons is that delicious combination of dirt and dust, mixed with the natural oil produced by your hands.

    If you routinely have marathon gaming sessions, the sweat and oil on your hands will inevitably transfer onto your controller. Other common causes are crumbs from snacks, or drinks being spilt accidentally onto your controller.

    So just what can you do, in order to fix this problem, should it afflict you?

    You May Be Suffering From Stick Drift

    According to a class-action lawsuit, many Xbox controllers suffer from phantom input or stick drift due to design flaws.

    A potentiometer tracks stick motion along a curved track.

    As the tracking meter scrapes material from the track, it can sense motion where none exists.

    Failing sensors or worn thumbstick pads and springs can also cause stick drift.

    Read Also: Gta 5 Ps3 Usb Mod

    Reassemble The Controller And Test It

    Now all you have to do is to reverse the process and reassemble the controller and test its functionality. I noticed the LB/RB buttons tend to stay in the pressed state when you test it while disassembled. This happens because the triggers come out further than they do when the are enclosed by the outer shell. So dont worry, it should work fine when everything is assembled again.

    For testing I used the jstest-gtk program which can be found in most common Linux distributions. There is also a flatpak available if you are in to flatpaks.

    Use Your Spare Controllers

    How to Fix & Replace a Broken Bumper on an Xbox One Controller – RB / LB Button DIY Fix

    If you have another controller available, try swapping it for your unresponsive Xbox controller. If that solves your issue, the problem lies with the original controller. If you still cannot move, you need to check your Xbox, as there may be an issue with the Network Interface Controller card.

    If the issue lies with your Xbox, you can see if a hard console reset solves the problem.

  • Press the button and keep pressing it until the console has shut down.
  • Disconnect the power cable.
  • Wait at least ten seconds.
  • With the power cable still disconnected, press the button 4-5 times to drain the consoles battery.
  • Reconnect the power cable
  • When the power brick light changes from white to orange, restart the Xbox.
  • If the problem persists and your console is still under warranty, you should get in touch with Xbox, your distributor, or the retailer to get it fixed or replaced.

    You May Like: Why Is My Xbox Not Signing Me In

    Lb Button Is Not Registering Hits Properly

    Hello,i will like to report an issue with my Xbox One controller.Firstly i purchased the console 6 months and had no problems whatsoever.Over the past two weeks,my LB button has started not registering hits and sometimes it doesn’t register at all,or it registers double sequential hits.I unfortunately do not have the bill of purchase from the retailer which i bought from as i must have accidentally thrown it away.Is there a way to remedy this?I tried an possible solution online which involved blowing hard in the space between the LB and LT button but i didn’t seem to work.Are there any other possible solutions?Thanks in advance.

    How Do I Reset My Clean Remote

    If you think you missed the TV code or are testing remote on different brand TVs, or are having difficulty operating TV first, reset the remote by pressing and holding the Setup button for 2 seconds and then while still pressing the Setup button down press and hold down the CC button at the same time until the LED

    Don’t Miss: Can You Connect Xbox Controller To Ps4

    Xbox One Pad’s L/r Bumpers Becoming Unresponsive Probably Just Needs A Spritz Of Contact Cleaner

    The prevailing internet wisdom seems to be to replace the plastic bumpers, but what if they’re not broken? The microswitches themselves are probably the culptrit

    The Xbox One controller has been a very well received controller and is one of the most popular controllers for PC players. Overall, it is a very sturdy and reliable controller, outside of one issue: the bumpers.

    Across reddit and various message boards over the past 7 years, it’s not hard to find reports of people finding the left and right bumpers on their gamepads losing responsiveness. I’ve been having the same issue, and it came to a head while playing Ori and the Will of the Wisps, with the bumpers constantly dropping inputs and causing me to miss dashes and die in a bed of spikes.

    Many of the proposed solutions you’ll find on youtube and elsewhere involve replacing the large plastic piece that includes both bumpers. This the correct solution when the small plastic tabs that trigger the L/R microswitches are broken but in my case these tabs were in perfect shape.

    So if your bumpers seem to be in good shape as well, take a look the microswitches themselves . Hook your controller up to your PC and find a way to test the inputs. I went to gamepad-tester.com. If you find that triggering the switch doesn’t always lead to a registered input, then you know it needs to be cleaned.

    After a a few applications of cleaner to each switch, your controller should be working like new.

    How To Prevent It

    How to Fix a Broken Bumper on Your Xbox One Controller (LB ...

    If youve solved your sticky controller problem, youre probably looking for advice on keeping them feeling new. Here are the best ways to keep your controller buttons responding well:

    Dont eat and play: Keep food and drinks away from your controller. Youll be less likely to make crumbs or spills that will gunk up your controller.

    Keep your hands clean: Oils from your hands can cause stickiness on your controller as well, so make sure your hands are clean between gaming sessions.

    Keep your storage area dust-free: Keeping your gaming area and the place that you store your gaming system free of dust is really important for the health of your device.

    With these practices, you can keep your Xbox One and PS4 chargers from getting stuck. If you need help after trying to take apart xbox one controller, visit your local uBreakiFix location.

    UBIF Home Office

    Articles on this blog are written by various members of the uBreakiFix Creative and Marketing teams.

    You May Like: How To Connect Xbox To Hotel Wifi

    Fix For Elite Series 2 A Button Issue

    I just bought the Xbox Controller Elite Series 2 today after saving up money for it for 3 months and I noticed something while playing GTA Online. When I am running my character would sometimes stop running for a few seconds and start up again. After about an hour of this I looked it up and saw nearly everyone with this controller have this issue, some with all face buttons.

    I just now put it into test mode on the console and noticed it is definitely intermittent when pressed. It only works 100% of the time when pressed directly down and not from an angle like sliding your finger across it. I realized this after reading from someone on Reddit that they noticed this too.

    Is there a fix Microsoft has put out for this obvious hardware issue that should have never gotten past testing?

    I can’t exchange it because these are sold out everywhere and I snagged the last one in my local area.

    My Lb Button On Controller Is Too Responsive

    Discus and support My LB button on controller is too responsive? in XboX Insiders to solve the problem I havent had this problem in a controller ever before but suddenly my LB button has started to take no pressure to press, is there a fix so I dont…Discussion in ‘XboX Insiders‘ started by /u/SickleAU, .

    Read Also: Can You Play Dvd On Xbox 360

    More articles

    Popular Articles