Cause : Low Battery Power
If your Xbox One Wireless Controller is not turning on, the controller might need to be charged. Plug the controller into the Xbox console using a USB cord. To check the controllers battery level, press the Xbox button, and navigate to the home screen. The controllers charge should be displayed in the bottom right corner of the home screen. Allow the controller to charge until the controllers charge level is full .
If your Xbox One Wireless Controller is losing battery power very quickly, the controllers batteries may be faulty. If the batteries will not charge or lose charge very quickly, replace the batteries using the Xbox One Elite Wireless Controller Series 1 Battery Replacement Guide.
How To Use An Xbox One Wireless Controller On A Windows 10 Laptop
Step 1: Make sure you have the right Xbox One wireless controller. The right controller has the Xbox power button embedded into the matte black plastic unlike older controllers that do not. Or you can use an Elite Xbox One controller to eliminate any confusion.
Step 2: Turn on your Xbox Wireless Controller by pressing the Xbox button.
Step 3: Press and hold the Bind button on your controller for three seconds. You will see the Xbox button start to flash rapidly.
Step 4: On your PC, press the Bluetooth button in the taskbar area, then choose Add a Bluetooth Device.
Step 5: Turn on Bluetooth and select Add Bluetooth or other devices > Bluetooth. Your PC will begin searching for your controller.
How To Pair An Xbox One Controller With An Iphone Or Ipad
Open the Settings app.
Press Bluetooth. Bluetooth is probably already on, but if it isnt, flip the Bluetooth toggle at the top of the next page to green.
While the Bluetooth menu is still open, grab your Xbox One controller and make sure its charged. Turn it on by pressing the Xbox logo button.
Press the wireless enrollment button on the back of your Xbox One controller and hold it down for a few seconds. The light on the Xbox button should start flashing quickly
On your iPhone or iPad, you should see Xbox Wireless Controller pop up under Other Devices in the Bluetooth menu. Press it.
The light on your Xbox button should immediately stop flashing and stay lit. Your Xbox One controller is now paired.
Don’t Miss: How To Clean Xbox One Controller
Xbox Series X And Series S Controllers
The Xbox Series X/S console is the latest generation in Microsoft’s gaming console. And it comes with wireless, Bluetooth controllers. But while some people have had luck connecting their Series X/S controllers to their Mac computers via the Bluetooth instructions above, many more havent.
As per an Apple Support page on connecting wireless controllers, Apple and Microsoft are working together to create Bluetooth compatibility support between the new Xbox Series X/S controllers and macOS.
This means compatibility doesnt exist between the controllers and Mac computers just yetat least, not at the time of writing this.
You can try using a cableMicrosoft sells a nine-foot USB-C cablebut thats had little luck for most folks as well. Even less than the Bluetooth in fact.
So plan to connect via Bluetooth, per the Xbox One wireless controllers steps above when macOS gets the driver update for this compatibility. Well certainly be on the lookout for it.
How To Connect An Xbox One Controller With A Cable
1. If youve got a drawer full of dozens of Micro USB cables then youre pretty much set for an incredibly quick and easy connection. Simply plug your Xbox One controller into the Xbox Series X or Series S and, well, thats pretty much it.
2. You can use the Xbox One controller as a wired controller even if it has no batteries in it. If youd rather go wireless, make sure its got batteries , and simply unplug the cable.
3. Connecting the cable just once will magically pair your controller to the console for all future sessions, so all youll have to do after that is hold down the power button to turn the controller on, and youre all set.
Also Check: How To Join Minecraft Servers On Xbox 360
If You Have Bluetooth And The Newest Xbox One Wireless Controller
In the perfect scenario, you have a laptop and an Xbox wireless controller which both have Bluetooth, and so all you need to do is to pair them. Open up Windows 10’s start menu and find ‘Settings’.
- Select ‘Bluetooth and other devices’
- Select ‘Bluetooth’
At this point, your laptop or desktop will start searching the nearby area for available Bluetooth devices in pairing mode. So power on your Xbox controller and put it into pairing mode.
- Press and hold the ‘X’ home button for a couple of seconds until it lights up
- Press and hold the small pairing button on the top edge
- Your ‘X’ home button should start flashing on and off
With your Xbox controller light blinking, that means it’s in pairing mode and it should show up in that list of available devices on your Windows 10 PC. Simply click on the Xbox wireless controller in that devices list, and within a second or two it’ll be connected and the light on behind the ‘X’ will be solid.
Connect The Xbox Series X / S Controller Via Bluetooth
If you want to connect your controller wirelessly, you can use bluetooth .
Before you can use the wireless connection, you must tell Windows that you want to connect a new bluetooth device and pair it with the operating system.
Now you must activate the pairing on the hand control. To do this, first hold down the Xbox button on the controller to turn it on, then hold down the pairing button located just above the USB connector for a short while.
When the pairing is activated, the Xbox logo on the top starts flashing with a white light.
You can now continue pairing in Windows. When the search box shows your Xbox Wireless Controller, select it and follow the on-screen instructions.
Notable: The Xbox Wireless Controller for Xbox Series X / S supports automatic connection to multiple wireless devices. So you can switch seamlessly between your Xbox and Windows if you want. This does NOT work with the old Xbox One X / S controller.
Recommended Reading: Xbox Usb Mods
How To Pair A Wireless Xbox Bluetooth Controller With Your Xbox One Mobile Device Or Windows 10 Pc
Microsoft has a bunch of different controller configurations available for the Xbox One line at the moment. There’s the high-powered Xbox One Elite Controller, the refreshed Xbox One standard controller with 3.5mm audio jack, and the all-new Xbox One S controller with textured grips and Bluetooth.
Whichever controller you decide to pick up for your Xbox One, here’s a quick and handy guide on how to pair them to your console.
How To Connect Other Game Controllers To Pc
Once you’re ready to start playing, check out our favorite PC games. And if you’re a PlayStation gamer, read up on how to use a PS4 DualShock 4 controller on a PC. We walk you through the surprisingly complicated process.
Like What You’re Reading?
Sign up for Tips & Tricks newsletter for expert advice to get the most out of your technology.
Recommended Reading: How To Create A Profile On Xbox One
How To Connect An Xbox One Controller Wirelessly
1. Turn on your Xbox Series X or Series S console by holding down the power button .
2. Turn on your Xbox One controller by doing the same thing hold down the big Xbox logo power button, located in the middle of the controller.
3. Next, youll need to press the pair button on your console of choice. On both the Series X, and Series S, this is located directly next to the USB port on the front of the console.
The Xbox logo power button will flash to confirm that youve pressed it, and that the console is now searching for accessories.
4. Within 20 seconds of you pressing the pair button on your console, youll need to press and hold the pair button on the Xbox One controller. On the controller, this button is located on the top, between the bumper buttons and next to the charging port.
After pressing it for a few seconds, the Xbox logo button in the middle of the controller will flash, and then remain solidly lit when its paired to the console. The process should only take a moment.
5. Once youve paired, youll eventually need to turn off your console, or even just your controller. Doing so is easy just hold down the middle Xbox logo power button on the controller, and youll see some options pop up on screen.
From here, you can choose to turn off your console , or just your controller if youd rather leave your console on.
Select your option with the left joystick, press “A” on the controller to select, and youre sorted.
How To Connect An Xbox One Controller To Mac Via Usb
If you dont have a Bluetooth-capable device, you may wonder if you can connect the two devices using the Micro-SD to USB option. Although it isnt as simple as the method above, you can still connect your non-Bluetooth controller to most Macs. Xbox One Contollers arent natively compatible with Mac in way of a USB connection. For this section, well need a little help from some third-party software. But dont worry, we tested this software in August of 2021 and its still working fine.
Plug your Xbox controller into your Macs USB port and you should be good to go.
Similar to most games youll play on an Xbox, 360Controller gives you options to switch controls, invert options, and more.
Read Also: Xbox App Change Gamertag
If You Have A New Controller For Your Xbox One Here Are A Series Of No
Bought yourself a shiny new controller for your Xbox One? You could be syncing up a second device for multiplayer gaming, or you might upgrading your current set-up with a swanky new controller the recently released Elite Series 2, for example.
Or you could simply be replacing your existing controller because of wear, tear, or a particularly frustrating gaming session too much button mashing, perhaps, or worse, an accidental wall throw.
Whatever your reason for connecting a new controller to your Xbox One console, pairing the two devices is quick and easy.
How To Connect Any Xbox One Controller To Pc Via Usb
If you dont mind a wired connection, using a USB cable is by far the easiest way to set up any type of Xbox One controller with a PC. This method works for Xbox One, Xbox One S, and Xbox One Elite controllers.
All versions of the Xbox One controller have a Micro USB connector on them. This allows you to connect them directly to a PC using a Micro USB-to-USB Type-A cable. And, since Windows can automatically recognize connected Xbox One controllers, theres nothing more to it.
- Step one: Connect your USB cable to your powered-on Windows computer
- Step two: Connect the Micro USB end to your Xbox One controller.
- Step three: Press the Xbox logo on your controller to turn it on.
- Step four: Enjoy your games. Once connected, Windows 10 should automatically detect the Xbox One controller, and youll be able to use it with games that support controller input.
Read Also: How To Fix Packet Loss On Xbox One
Press The Connect Button On Your Xbox One
The connect button is what tells your Xbox One that you are trying to connect a controller. The specific location and appearance will depend on the type of Xbox One that you have.
Xbox One: The connect button is located around the corner from the slot where you insert games.
Xbox One S: The connect button is located on the front of the console, on the right side, below the power button.
Xbox One X: The connect button is located on the front of the console, on the right side, right next to the USB port.
Once you have located the connect button, press and release it.
Make sure you have your Xbox One controller handy. After pressing the connect button on the Xbox One, you need to immediately proceed to the next step and complete it within 20 seconds.
How To Pair An Xbox Series X Controller To An Xbox Series X Or S
If you’ve previously paired an Xbox Wireless Controller to an Xbox console then this process should be familiar to you as it remains the same, so start by inserting the batteries or battery pack into your Xbox Series X controller then pressing and holding the Xbox button until it lights up. Next, press the Pair button on the front of your Xbox Series X or S console, which is found next to the USB port, then within 20 seconds press and hold the Pair button on your Xbox Series X controller until the Xbox button starts flashing. That signals that it’s searching for your console, and shortly after the Xbox button should stay lit to confirm it’s connected.
If you are having trouble pairing your Xbox Series X controller to your console this way, you can instead use the USB-C cable to connect it directly to your Xbox Series X or S, which should create the connection automatically.
Don’t Miss: How To Use Command Blocks Xbox One
How To Use An Xbox One Controller On Pc
ByWes Fenlonpublished 6 November 20
Pro tips for getting the most out of Microsoft’s latest controller via USB, wireless adapter, or Bluetooth.
If you want to use a controller on PC, you just can’t beat the convenience of the Xbox gamepad. If you want a dead simple plug-and-play experience, the Xbox controller is the obvious choice, and it’s definitely among the best PC controllers, anywayMicrosoft revised its controller after the launch of the Xbox One, making its bumpers feel better and adding Bluetooth connectivity.
Thanks to the built-in Windows driver, you won’t need any special software for your PC to immediately recognize your pad. So what’s the point of a guide at all?
Well, there are a couple ways to hook up the Xbox One controller wirelessly, and a few things you should know about the different iterations of the controller and what how exactly they’ll work with your PC.
How To Connect Xbox One Controller To Pc
It is possible to connect an Xbox one controller to your computer using several different techniques and cables. Alternatively, you can use a Micro-USB/USB-C cable to link the two devices wirelessly. Its also possible to link the controller to your PC via an Xbox Wireless adapter, which requires additional hardware.
The Xbox wireless pad is not compatible with all PC games. Visit the publishers website or the marketplace where you buy games to see if it supports controllers. With that out of the way, here are the directions for connecting an Xbox wireless controller to a computer.
You May Like: How To Connect Xbox To Chromebook
How To Connect An Xbox Wireless Controller To A Pc Through Bluetooth
If youd rather avoid cable clutter and make sure that the Xbox Wireless Controller lives up to its name, you can connect it to your Windows 10 PC using Bluetooth.
To do so, first, open the Start menu on your computer and click the gear icon to open Settings.
In Settings, click Devices.
In Devices, make sure that youre on the Bluetooth & Other Devices page, and then click Add Bluetooth or other device.
In the Add a Device window that appears, select Bluetooth.
Next, put your Xbox Wireless Controller in pairing mode. First, power up the controller by pressing and holding the Xbox button.
RELATED:How to Put Your Xbox Controller Into Pairing Mode
Once the button lights up, hold the pairing button for a few seconds until the Xbox logo blinks rapidly.
On your computer, click Xbox Wireless Controller when it appears in theAdd a Device list.
Congratulations! Your Xbox Wireless Controller is now connected to your PC.
Select Done to finish the process.
You will have to take extra steps to turn off your Xbox controller when youre done playing, though.
RELATED:How to Turn off an Xbox Controller When Paired Using Bluetooth
Simple Tips To Connect A Controller To A Pc
If you have an Xbox One console and love to use the controller while gaming then definitely you want to use it on your PC also. Gaming on PC is through default keyboard and mouse which gives you a lot of options but still if you are finding it hard and looking for a solution on how to pair the Xbox controller to a Windows 10 PC then here is a guide for you. Xbox One controller connects through Bluetooth to the console, the same method can be used to connect it to a PC. It is simple and will allow you to enjoy games on PC using an Xbox Controler. There are two ways to connect an Xbox One controller to a PC.
Don’t Miss: Xbox Change Profile Pic