Steam Controller Makes A Game Crash Or Not Recognized
If your Steam Controller is working well in Steam Big Picture mode, but not recognized by a game or the game starts crashing when you plug in the controller, this may be because of the native driver that has been added to the Linux kernel 4.18. Try to unload it, restart Steam and replug the controller.
The module name of the driver is hid_steam, so to unload it you may perform:
# rmmod hid_steam
Open Steam In Big Picture
When you have Steam open, on your computer, open it up in Big Picture mode by clicking the small symbol of a box with two expanding arrows arrows, located on the top right.
You will only have controller support while playing in Big Picture mode, so make sure next time you play Star Wars: The Old Republic, open big picture first, then open the game.
How Do I Connect My Controller To Steam
Steams Controller Settings Open Steam and go to the Settings section under the Steam tab. Click on the Controller tab and click the General Controller Configuration button. In the Controller Settings window, check the boxes to activate the configuration support for whichever types of controllers you will be using.
Don’t Miss: How To Get Free Games On Xbox 360
Two: Enable Support For Other Gamepads
Steam only allows you to configure Steam Controllers by default. Youll have to enable configuration support for other types of controllers if you want to tweak them.
Select the gear-shaped Settings icon at the top right corner of the screen using your mouse or controller.
Then, select Controller Configuration on the Settings screen.
RELATED:How to Use the PlayStation 4’s DualShock 4 Controller for PC Gaming
Enable the PS4 Configuration Support, Xbox Configuration Support, and Generic Gamepad Configuration Support to enable support for other types of controllers.
If these options arent enabled, youll still be able to use the controller in the interface and games. You just wont be able to configure the controller and remap its buttons.
Steam also displays a list of your connected controllers here. If you dont see a controller here, it isnt connected properly. If its a wireless controller, it may not be powered on.
Youll be prompted to disconnect and reconnect any connected controllers after enabling this option. Youll need to reconnect the controller before the configuration options appear.
When you reconnect the controller, youll be prompted to name it. This name will appear in Steams interface to uniquely identify the controller.
How To Set Up And Use Console Controllers With Steam
If you want to play games on your PC without a keyboard, here are the steps needed to connect your console controller.
While PC gamers love to talk about how much they love the keyboard and mouse control scheme, sometimes you just want the feel of a controller in your hands.
When it comes to Steam, Valve has luckily made it easy to get almost any controller working with most games.
So, no matter what controller you’re using, read on to discover how to get gaming on your PC with it.
Also Check: Is 2k20 Free On Xbox
How To Connect Xbox Controller To Chromebook For Steam Games
Forget the keyboard and mouse, use a controller for Steam gaming on Chromebooks.
It’s one thing when you’re playing games on your phone and can take better advantage of onscreen touch controls. But once you get into the world of desktop gaming, it’s an entirely different beast.
Thanks to Google and Valve’s efforts with bringing Steam to Chromebooks, this opens the door to a world of possibilities for gaming that we haven’t yet seen on Chrome OS. Not only can you connect your favorite keyboard and mouse, but you also have the ability to connect an Xbox controller to Chromebook for Steam games.
How To Use Wired Usb Controllers On Steam Deck
The Steam Deck spends a lot of time cord-free, but you can still tether it to a wired USB controller. If youre planning on plugging straight into the handheld, youll either need to use a USB C cable or an adapter that supports USB A.
The official Steam Deck dock hasnt arrived yet, but it should make using wired gamepads a little easier. Not only will it provide an expanded number of USB ports, but connecting to the dock rather than the portable should feel less awkward and a little more secure.
Don’t Miss: How To See How Many Hours Played On Xbox
How Do I Make Steam Forget A Controller
How do I Disable Steam Controller Configuration? In Steam, click on the Big Picture Mode button in the upper-right corner. Click on the Library button. Select Rocket League. Click on the Manage Game button in the left-hand column. Click on the Controller Options button. Click the Steam Input Per-Game dropdown box.
Big Picture Mode Is Your Controller’s Best Friend
Now we come to the part where we actually get your controller working with the games. Luckily, Steam has a built-in feature that allows you to easily get any controller working with the majority of games.
Big Picture is a special mode available in Steam, intended to facilitate using the platform with a TV. The mode has both large user interface elements and controller navigation to make use from a distance as easy as possible.
Related: How to Stream PC Games to Your Apple TV With Steam Link
The best part about Big Picture is that you can also use it to easily set up any controller with your various games.
Once in Steam, click the white rectangle icon at the top right of the screen to open Big Picture mode. In Big Picture, click the gear icon to open settings. Then, click Controller Settings.
After that, click the checkmark box for whatever controller you’re trying to use. For example, to use a Switch Pro Controller, choose the checkmark box labeled Switch Pro Configuration Support.
If you’re only planning on playing games with built-in controller support, you’re already good to go. Steam automatically maps your controller to the correct buttons, so it should work even if you boot your games outside of Big Picture.
You May Like: How Much Does Rocket League Cost On Xbox
Three: Remap Your Controllers Buttons
Now, head to the Library section in Big Picture Mode and select a game you want to remap the controllers buttons for.
Select Manage Game and then select Controller Configuration.
Youll see Steams complex button-remapping screen. Whatever type of controller you have, you can use this interface to link the controllers buttons to different mouse and keyboard events. For example, you could configure the Steam Controllers touchpad or the joystick on another type of gamepad to function as a mouse, allowing you to use your controller in a game that was never designed to support controllers.
Other people have already done the work of creating controller profiles that allow you to use a Steam Controller or other types of controllers in different games. To download a pre-made profile, select Browse Configs at the bottom of the window.
Youll see different available layouts depending on which types of controller youre using. For example, different configurations are available for the Steam Controller than the Xbox 360 controller. These types of controllers have different buttons and features, so configurations cant be transferred between them.
To manually remap a group of buttons or single buttons, select it on the configuration screen. For example, if you wanted to remap the Y button on an Xbox controller, youd select the pane with the Y button at the bottom right corner of the screen.
How To Setup Steam To Use Your Switch Pro Controller On Pc
The Best Way to make sure your Pro Controller works properly with your PC game is to use Steam’s Big Picture mode, which uses a comfortable lean-back system to allow you to navigate.
You should use the gamepad to navigate Big Picture if you have the Pro Controller connected. It is possible to switch between using the Nintendo Button Layout or the Xbox controller button layout .
When configured through Steam, you should use the Pro Controller with any Steam game similar to an Xbox gamepad. Vibration can be enabled or disabled by selecting a controller from the “Detected Controllers” list in the same setup screen as before. It is possible to calibrate the analog sticks by clicking the Calibrate button manually. Also, the controller can be set to disconnect after a specified amount of time before going to sleep.
Enter the Switch Pro Controller overlay from Steam’s controller options while running in Big Picture mode. There are several ways to map the inputs on the Pro Controller, but default configurations are usually sufficient for most games. By changing the controller mapping based on the situation, you can fix any problems on the fly.
You May Like: Do Xbox 360 Games Work On Xbox One
Playstation 2 Controller Via Usb Adapter
To fix the button mapping of PS2 dual adapters and mimic the Xbox controller you can run the following command:
# xboxdrv --evdev /dev/input/event* \ --evdev-absmap ABS_X=x1,ABS_Y=y1,ABS_RZ=x2,ABS_Z=y2,ABS_HAT0X=dpad_x,ABS_HAT0Y=dpad_y \ --axismap -Y1=Y1,-Y2=Y2 \ --evdev-keymap BTN_TOP=x,BTN_TRIGGER=y,BTN_THUMB2=a,BTN_THUMB=b,BTN_BASE3=back,BTN_BASE4=start,BTN_BASE=lb,BTN_BASE2=rb,BTN_TOP2=lt,BTN_PINKIE=rt,BTN_BASE5=tl,BTN_BASE6=tr \ --mimic-xpad --silent
Can You Connect Multiple Controllers To Steam Deck
Just like a PC, you can connect multiple controllers to the Steam Deck for multiplayer gameplay. The number of simultaneous Bluetooth connections you can make may vary, but you should be able to comfortably connect four or mode pads to the Deck wirelessly. You can also hook up wired options, but youll need to either use a hub or a docking station, as the device only has one USB C port.
Read Also: How To Connect Xbox One To Pc Monitor Without Hdmi
How To Reconnect Your Xbox Controller To Your Console
If your Xbox controller is already paired to your console, you can turn it on by pressing the Xbox button. But if you need to pair it wirelessly, you will have to use one of the methods listed above.
You should turn off or shut down and unplug your Xbox when you are done so that it doesnt process any commands from another device.
Fix Game Controller Not Working In Steam On Windows Pc
Its not uncommon for PC and console gamers alike to encounter issues like USB Gamepad is not recognized or working, Xbox Cloud Gaming Controller not working, Xbox Controller Bluetooth keeps disconnecting. In this post, we will be addressing the issue of Game Controller not working in Steam on Windows 11 or Windows 10 computer.
Recommended Reading: How To Play Fortnite Without Xbox Live
Check Xbox Controller Support
Not all games, no matter how much you want them to, will support a controller. Games like Among Us or Inside are best played with a keyboard. Check if the game youre trying to use the controller in has support for a controller.
You can check this by going to the games settings for control/keyboard/mouse. If a game explicitly says it is best played with a keyboard, it is best to not try to play it with a controller.
How To Enable Steam Controller Configuration For Non
Want to use your game controller for non-steam games? You can with Steam’s Controller Configurator, and here’s how.
Steam supports a range of extra features and options for controllers. You might have grown to depend on them. Did you know you’re able to access these features, no matter which storefront you own the game on?
Here’s how to access the Steam Controller Configurator in any game, including non-Steam games.
Don’t Miss: Is War Thunder On Xbox
What To Do With Non
Using the methods discussed above, you can easily use a switch pro controller with your pc, but it only works with steam games. But what if you want to play a non-steam game using a switch pro controller? What will you do now? The switch pro controller hardware support will run out of luck in this scenario.
The main problem here now is how windows will detect your switch pro controller now if you want to play non-steam games. Luckily there are two simple solutions for this problem.
Solution1: The first solution is to use an external Bluetooth adapter that is specifically designed for different types of gamepads. You will find plenty of them out there for switch pro controllers.
Solution2: The second method is to use a software-based XInput Wrapper. There is plenty of software out there that provides this functionality. Just configure your switch pro controller with them, and you can easily use it on non-steam games.
Changing The Key Binds
1. Go to your Steam Library and open the game you wish to play. Locate the in-game control settings and take as many screenshots as necessary of the keyboard controls.
2. Open the Controller Configuration for the game you wish to play.
3. At the bottom of the configurator window, press the Browse Configs button. From here, you will be able to import controller mappings that were already made by several different sources. You can use configurations that you’ve created for other games, you could experiment with configurations created boy others in the Steam community, or if the game has it available, you could used the recommended configuration created by the developers of the game.
For this tutorial, click on the Templates tab and open the one the template for keyboard and mouse controls. An the bottom of the preview screen, click the Apply Configuration button.
4. Now that we have the right template, we can change the controller settings however we please. For each button on the controller that you want to change, click the symbol corresponding to it to change the key bind. This will allow you to set any button on your controller to be inputted as if you are pressing a certain key on the heyboard. To help stay organized, you can also leave labels that explain what each input will control in-game.
You May Like: How To Change Fortnite Name On Xbox
Connect Xbox Controllers To Chromebook For Steam Games
With your Xbox controller updated, you can now proceed with the steps to connect the Xbox controller to Chromebook. It’s no different than pairing your favorite Bluetooth headphones or other peripherals with the best Chromebooks.
1. Open the Settings app on your Chromebook.
2. Under Bluetooth, click Pair new device.
3. Turn on your Xbox controller.
4. On the top of your Xbox controller, press and hold the Pair button until the Xbox button begins flashing white.
5. From your Chromebook, select Xbox Wireless Controller under Available devices.
A few moments after you select your Xbox controller, it will be added to the “Connected” devices panel of the Bluetooth settings.
How To Use A Steam Controller On The Steam Deck
Steamception!
On the Steam Deck, go to Settings > Bluetooth and turn it on.
Steam controller: Hold Y + Steam button to start the controller in Bluetooth pairing mode. .
Using a Steam controller on the Steam Deck: Since the Steam Deck essentially has the same inputs as Valve’s own controller, you can use its buttons and trackpads the same way. You’re just missing two extra grips on the back.
Also Check: How To Turn On Vibration On Xbox One Controller
How To Enable Steam Configuration Support
With your Xbox controller paired to your Chromebook, you can now use it with any of the games that you have installed already. However, in order to make sure that you don’t run into any compatibility or configuration issues in Steam games, we need to enable Steam configuration support.
1. Open the Steam app on your Chromebook.
2. With the app loaded, click Steam in the top left corner.
3. From the drop-down menu, select Settings.
4. Click Controller in the sidebar.
5. Under Controller Configuration, select General Controller Settings.
6. Click the checkbox next to Xbox Configuration Support.
7. Click the Back button at the bottom of the window.
The biggest reason why you’ll want to enable Steam configuration support is so that you can remap buttons for various games. Many of the latest Steam games include custom button remapping, but there are some older titles that don’t. But with Configuration Support enabled, you can go through and remap buttons from Steam, as opposed to relying on the default layout in games.
How To Remap Your Controls
Another great feature of Steam’s Big Picture is the ability to remap your controls. If you have a Switch Pro Controller, you may want to swap the face buttons around a bit, as Steam automatically maps the typical south face button to A on the east face button.
You can also map keyboard commands to a controller, meaning you can even play games without controller support at all.
Back in Big Picture, navigate to the game you want to play, and scroll down to Manage Game. On the right, click Controller Configuration.
In many cases, Steam may have applied a default mapping layout for your buttons. But you can change these to whatever you like by selecting the button you want to map, and then using the UI to select a keyboard or mouse control to map it to.
If you don’t want to do any of that, you have the option to download community controller layouts. Press X on your controller and you’ll find a menu of pre-made templates, plus community-created layouts.
Not every game will have community layouts. However, most should work easily with the built-in templates. And if not, you can always create and upload your own layout instead.
Read Also: When Is Insurgency Sandstorm Coming To Xbox