Why Wont My Xbox Controller Connect To My Laptop
You can restart your controller by pressing and holding the Xbox button * for six seconds to turn it off. The Xbox button needs to be pressed again to turn it back on. You can connect your controller to your PC using a USB cable or the Xbox Wireless Adapter for Windows 10 by using the Xbox Wireless Controller.
How Do I Connect My Controller To My Xbox 360
Your controller features an inline release cable. If the inline release cable becomes disconnected, reconnect the cable.
Copyright 2021 ACCO Brands. All rights reserved. Use of this site is subject to the ACCO Brands Terms of Use and Privacy Policy. This site is operated by ACCO Brands. All logos, trademarks and brands are property of their respective owners. View the full site Sitemap.
Connect Your Xbox 360 Controller To Your Computer
If you are using a wired Xbox 360 controller, plug the USB connector of your Xbox 360 controller into a USB port on your computer.
If you are using a wireless controller, insert the USB connector of your Xbox 360 Wireless Gaming Receiver into a USB port on your computer. A green light will be on if your wireless receiver is working.
Recommended Reading: How To Connect Xbox To Iphone Hotspot
How To Install A Knockoff Adapter
If youre stuck with one of the lower-quality knockoffs, were sorryby comparison, its a huge pain. Fortunately for you, its not hard to get them up and running as long as you know the completely non-intuitive way to do it.
First, plug your device into your computer. We recommend plugging it directly into a port on the back. If you must plug it into a USB hub, make sure its a powered hub. Wed also recommend picking a port that youll be able to leave the device more or less permanently attached to. Whenever you unplug it, youll need to repeat the annoying steps were about to outlineso youll want to leave it plugged in at all times, if you can.
Lets emphasize that last point again: with the majority of aftermarket adapters weve come across if you unplug the adapter you have to repeat the annoying multi-step installation process. In my experience, it was worth the extra money to buy another genuine adapter just to avoid this hassle.
With the adapter plugged in, navigate to the Windows Device Manager. Press the Start button and type device manager to access it. Look under Other Devices in the list of devices under the entry for your computer.
We know its quite nondescript, but unless you have multiple Unknown Devices on your PC, that little Unknown device entry is your knockoff Xbox 360 controller adapter. Right click it and select Properties.
Select the Driver tab in the Unknown device Properties box and then click Update Driver.
How To Determine An Authentic From An Off
On the back of an authentic Microsoft adapter, you read Microsoft Xbox 360 Wireless Receiver for Windows, and on its front, youll see the Microsoft branding.
Any additions or omissions are a sign of a fake dongle.
The stamps or prints on imitative clones usually show X360, PC Wireless Gaming Receiver, or similar remarks.
You May Like: Xbox 360 Slim Weight
Installing Microsoft Xbox 360 Wireless Receiver On Windows 7 And Lower
The process of installation is different on Windows 7 and lower. Downloading does not start automatically rather you have to do it manually.
You should confirm the success of the connection. The verification process is the same.
- Go to âDevice Managerâ on your PC and look for the drivers whether they are installed or not.
- If they have been installed, you will see the command âpair controller to PCâ.
How To Connect Xbox 360 Controller To Pc Without Receiver
Playing with a mouse and keyboard can become frustrating if youre a hardcore video gamer.
You have to sit by your PC, hold on to WASD keys and memorize several other buttons to take immediate action in games.
Worst of all, your hands are in an uncomfortable elevated position for hours.
Thats where an Xbox 360 Controller for PC comes into play.
As relieving as they are, its sometimes very challenging or pricey to pair these controllers with your PC.
Youre probably wondering if you can connect an Xbox 360 controller to a PC without a receiver.
Keep reading to see whether thats possible.
Recommended Reading: How Much Is Save The World On Xbox One
Connect A Wired Xbox 360 Controller To A Windows Pc
If you are using a Xbox 360 wired controller, you can follow these steps to install your Xbox 360 wired controller on Windows 10.
Step 1. Plug the USB connector of your Xbox 360 controller into any USB 2.0 or 3.0 port on your Windows PC.
Step 2. Then Windows 10 will automatically install drivers for the Xbox 360 controller. Just wait patiently and Windows will download or install the related driver software very quickly.
Step 3. When you see the pop-up notification that shows the drivers have been installed, you can use your controller immediately.
Step 4. Open a game that support your controller and then press a button, pull a trigger, or move a stick on the controller to test if your controller works properly.
Tip:
- If the Xbox 360 wired controller is not detected by your Windows PC, try re-plugging it into a different USB port, and then try again.
- If your controller still does not work, try installing latest Windows updates and then try again.
Ways To Connect Xbox 360 Controller To Computer
Heres the sour news:
- You can never connect a wireless Xbox controller to your PC without a receiver.
Thats because these gadgets come with a proprietary connection protocol thats only recognizable by an adaptor.
- Theres no chance to link an Xbox 360 controller via Bluetooth.
These controllers work on a different frequency than your Bluetooth transceiver.
Therefore, you cant pair the two.
This leaves you with only three options to pair Xbox 360 controllers to PC:
You May Like: Gta 5 Cop Mod Xbox 360
How To Install An Individual Aftermarket Receiver
Installing the duplicate versions requires multiple steps and is much more demanding than the previous method.
However, it still works.
Regardless of what Windows version youre using, continue as follows to set up a duplicate adaptor.
How To Connect An Xbox 360 Controller To A Pc
The selection of games on PC is better than ever. With the rise of the indie scene and a multitude of digital storefronts selling games at discounts, theres nothing stopping you from enjoying whatever game you want. Well, almost nothing. While a mouse and a keyboard combo is a time-tested setup, sooner or later, youll probably need a controller.
If you do some digging, youll find out that the Xbox 360 controller is the best choice for a majority of games. So you may be wondering how to connect an Xbox 360 controller to a PC. Is it complicated? Do you even have to do it?
No matter how much you love playing games the traditional way, with a keyboard and a mouse, youll find a game that just feels off. Perhaps it has a bizarre keyboard setup that you cant change, or its just designed to be played with a controller. If you check the forums, youll see that most gamers recommend getting an Xbox 360 controller since its the best-supported option for Windows-based PCs. No disagreement here, Xbox controllers are high-quality devices that provide great functionality with a majority of games. And if youre playing a PC port of a console game, having an Xbox 360 controller is almost mandatory. So getting one is a no-brainer, but what about installing it?
Recommended Reading: How To Eject Disc From Xbox One
Connecting A Wireless Xbox Controller On Android
First, swipe down from the top of your screen to open your quick menu. Long-press the Bluetooth icon to enter your Bluetooth configuration menu or navigate to your Bluetooth configuration menu from your phone settings.
Once youre in your Bluetooth menu, its time to click Pair new device. While you do this, power on your Xbox controller by long-pressing the Xbox button and hold down the sync button at the top to put it into searching mode. Once the light is blinking rapidly, let go.
Your controller should show up in your list of available devices. Tap its name to pair it.
If the pairing is successful, you should see the controller appearing under the Currently Connected section.
How To Pair Your Controller To Your Pc
The only thing left to do at this point is to sync your controller to the new wireless receiver. If youre an Xbox 360 user porting some or all of their old controllers to their PC, then this process will seem very familiar, as its only a hair different than the process of pairing controllers with the actual Xbox 360.
Press the button on the receiver then, immediately after, press the connect button on your wireless controller .
The green ring of lights on the Xbox controller will rotate around and then the controller will signify which controller it is by lighting up the appropriate quadrant .
One final step you may wish to take, even though its not required to get the controllers to work, is to , it adds in a really convenient function: you can tap and hold the Xbox logo on the controller to get a battery status check.
Thats all there is to it! Before you dash off to play, however, we strongly recommend bookmarking, Evernote clipping, printing, or otherwise saving this tutorial if you have an aftermarket dongle. As we mentioned at the start, if you unplug the receiver you have to go back into the Device Manager and install the drivers again.
You May Like: Xbox One Hotspot
Connect A Wireless Xbox 360 Controller To A Windows Pc
If you own a wireless Xbox 360 controller, you can connect the Xbox 360 wireless controller to a Windows PC with an Xbox 360 Wireless Gaming Receiver. Then you can follow the steps below to setup a wireless Xbox 360 controller on a Windows PC and to play games with it.
Step 1. Prepare an Xbox 360 wireless gaming receiver. If you don’t have one, you can purchase a wireless receiver on Amazon, which may cost you about $10 to $20.
Step 2. Insert the gaming receivers USB connector into an USB 2.0 port on your Windows computer.
Note:
Step 3. Once it is plugged in, you will see a green light appeared on the receiver, which indicates that the unit is working properly.
Step 4. Install software to make sure the gaming receiver and the wireless Xbox 360 controller to properly sync with one another.
Note:
Step 5. Then you need to turn on the Xbox 360 wireless controller. Press and hold the Xbox Guide button to turn on it.
Step 6. On the gaming receiver, press the Connect button. It is a small circular button located near the middle of the receiver.
Step 7. The lights on the controller and on the receiver will flash green, which indicate that the device is trying to establish a connection. When the lights stop flashing and one of the lights around the Guide button remains lit, this means that the controller is connected.
How To Connect Xbox One Controller To Xbox Series X
Do Xbox One controllers work on the Xbox Series X and the Xbox Series S? The answer to that question is yes, they do.
This goes without saying but we will anyway: anything prior to that will not connect to your Xbox Series X or Xbox Series S console. You cannot connect an original Xbox controller or an Xbox 360 controller to these machines.
But if youre wondering, how do I connect my Xbox One controller to my Xbox Series X? Its the same process that we mentioned in the previous section, so just hold down the pairing button on your console and the matching button on top of your controller and they should sync up no problem.
Also Check: How To Get Someones Ip Address On Xbox One
How To Connect Any Xbox Controller To Xbox Series X/s
Do you have to own the latest Xbox controller?
If youre struggling to connect an Xbox controller to your Xbox Series X or Xbox Series S, youve come to the correct place to learn where youre going wrong.
Whereas PlayStation went for an almost complete overhaul when they debuted their new controllers on the PS5, Xbox did not feel the need to break the mould and we cant say that was a bad move.
The Xbox controller is, for our money, the best controller design out there and we were saying that even before the Series X came along. The new one only has tweaks to what came before but even those small things have made the best better. Grip has been improved, the thumbsticks move much more freely, and the simple button press/hold design to capture a screenshot or record a clip is super handy.
But how do you connect controllers to the new Xbox consoles? And can you still use the old-style controllers from the Xbox One for the Xbox Series X? Here is all you need to know about that!
Connect Xbox 360 Controller To Pc
Connecting an Xbox 360 controller to a PC is fairly easy. Both the wired and wireless version will be able to connect to it.
- Pair the controller if its a wireless controller and make sure the controller is On.
- Connect the controller and make sure its light turns on i.e., the X on the controller lights up.
Give Windows 10 a few minutes to set up the new device and check if it works. You can check controller input outside of games.
If the controller lights up but no input is detected during tests, the controller hasnt been set up correctly. If the controller input has been detected but it isnt working in games. Try the fixes below.
Recommended Reading: How To Mod Money In Gta 5 Online Xbox 360
Connecting A Wired Xbox Controller On Android
If youre using an Xbox Series S/X controller or an Elite Series 2 controller, youre in luck! These controllers come with USB-C cables that should make it easy to directly wire your controller to the vast majority of modern Android devices, which can be useful if you want to use them temporarily with your phone without manually unpairing and re-pairing them to your main PC or console.
For wired Xbox controllers going back to the Xbox 360, youll need to first confirm which version of USB the charging port on your phone or tablet uses. For instance, if you have a micro USB connector on your phone or tablet, youll want to get a USB OTG adapter to use a wired Xbox 360 controller with the device.
P/s: Connect Controller Using The Proper Ports
How to connect Xbox 360 wireless controller to pc should not be complicated at all. Just like any other peripherals, you have to follow the correct instructions to ensure that you get the best experience.
The most important thing to remember is to connect the xbox 360 wireless controller to your computer using the proper ports.
Recommended Reading: Xbox One Tethering
How To Connect Xbox 360 Controller To Pc
Keep in mind that a Bluetooth connection is not possible for Xbox controllers. Because Bluetooth disables the frequencies used by wireless Xbox 360s, dont go to a store that sells them to buy one.
- A special adapter is required for Xbox wireless controllers to work with your computer.
- If you want the controller, youll have to buy it separately from Microsoft or buy it from Amazon.
- A controller and a USB adapter for the Windows it tested are sold separately.
For those who already own a game controller and have extra cash to spare, Microsofts less obnoxious and officially verified approach is a good choice. Get the package directly from the company and youll be good to go.
- Its possible to purchase the Official Xbox 360 Wireless Controller for Windows Pack from Microsoft Store.
- Costly, but unsatisfactory and unworth it.
- Despite its age, you can still find a few retail outlets and stores that arent listed.
- This means youll have a spare controller, which you can either keep or sell.
3.There is a steep slope in the price
The bundles official price is $60, and the worst part is that you can get a lot of games for less than that. As a result, even if its old, theres no going backward.