Thursday, September 29, 2022

How To Connect Xbox 360 Controller To Laptop

Don't Miss

How To Install A Knockoff Adapter

How To Connect Your XBOX 360 Controller to a PC

If youre stuck with one of the lower-quality knockoffs, were sorryby comparison, its a huge pain. Fortunately for you, its not hard to get them up and running as long as you know the completely non-intuitive way to do it.

First, plug your device into your computer. We recommend plugging it directly into a port on the back. If you must plug it into a USB hub, make sure its a powered hub. Wed also recommend picking a port that youll be able to leave the device more or less permanently attached to. Whenever you unplug it, youll need to repeat the annoying steps were about to outlineso youll want to leave it plugged in at all times, if you can.

Lets emphasize that last point again: with the majority of aftermarket adapters weve come across if you unplug the adapter you have to repeat the annoying multi-step installation process. In my experience, it was worth the extra money to buy another genuine adapter just to avoid this hassle.

With the adapter plugged in, navigate to the Windows Device Manager. Press the Start button and type device manager to access it. Look under Other Devices in the list of devices under the entry for your computer.

We know its quite nondescript, but unless you have multiple Unknown Devices on your PC, that little Unknown device entry is your knockoff Xbox 360 controller adapter. Right click it and select Properties.

Select the Driver tab in the Unknown device Properties box and then click Update Driver.

How To Reconnect Your Xbox Controller To Your Console

When using your Xbox controller wirelessly, you can turn the controller off by holding the Xbox button on it for around five seconds. When the light goes out, the controller is off.

Keep in mind that if your Xbox controller is already paired to your console, pressing the Xbox button will turn the system on. You should still be able to pair it wirelessly using either of the methods above, but you’ll probably want to turn your console off after you do so .

After you connect your Xbox controller to a PC using any method above, you’ll need to re-pair the controller with your Xbox next time you want to use it there. To do this with the wired method, connect the controller to your Xbox using a USB cable, then press the Xbox button to pair.

To pair the controller wirelessly, press the pairing button on the system. It’s to the left of the disc tray on the original Xbox One, and at the bottom-right of the front panel under the power button on the Xbox One S and Xbox One X. On Xbox Series S|X, it’s next to the USB port at the front of the system.

After hitting this button, turn on your controller by hitting the Xbox button, then hold the Pair button on the top to pair it.

Read more: Xbox One Controller Not Working? Tips on How to Fix It

The Official Bundle: Expensive But Headache

If you dont mind paying a premium then the most frustration-free and guaranteed-to-work method is to buy the official Xbox 360 wireless controller for Windows bundle. Despite the Xbox 360 getting a little long in the tooth, you can still find official Xbox 360 For Windows controller packs both on the shelves at many electronics retailers, online, and directly from Microsoft. And hey, if you only need the USB receiver, you can always sell the controller on Craigslist and try to get your money back.

RELATED:

The MSRP of the official bundle $59.95, and youll usually find it at close to that price at places like Best Buy. If you can find it cheaper from a reputable retailer, then by all means jump on it. If you must shop on Amazon, be sure youre buying a product marked fulfilled by Amazon and be ready to return it if it ends up that the product is not an official model.

Don’t Miss: Xbox 360 Jtag Usb

Recommended By Our Editors

This $25 adapter has some benefits over Bluetooth. For starters, you can use up to eight gamepads with the adapter, while Microsoft recommends using just one at a time with Bluetooth. The headset jack is also enabled if you use the adapter, with adjustable settings in the Xbox app for Windows 10.

How To Connect And Use An Xbox Controller On Your Pc

How To Connect Xbox Controller To PC

Video game consoles are just computers that have been custom-built for a very specific purpose. So it’s not a huge leap to make a console controller play nice with your desktop or laptop.

It’s especially easy if you’re talking about plugging an Xbox controller into a Windows machine. Obviously. But even Mac users can take advantage of Xbox controllers for their gaming, albeit with a pretty notable limitation. Setup is very easy though.

First, know that it doesn’t matter too much which generation of console controller you want to use, unless we’re talking about an original Xbox controller. Those plugged in using a proprietary connector, so you’d need to buy an adapter like this to make the connection.

Beyond that, every Xbox controller since the Xbox 360 days relies on a USB connector. So using them with your computer of choice is as simple as plugging into a USB port. If you’re using a Mac, know that may need to take the extra step of installing a freely available custom driver.

That’s really it. All you need for wired gaming with an Xbox controller on PC is the USB cord you use to charge your controller. Plug it into a free USB port on your computer and you’ll be off to the races. Yes, it’s that simple.

Congrats, you’re now ready to game.

You May Like: What Happens When You Block Someone On Xbox Live

Install The Xbox Drivers On Your Pc

The first thing is to install the necessary drivers on your PC. It includes the following steps:

  • Locate the USB port on your PC and insert the adapter into the USB port
  • Go to Windows search box and then to Device Manager
  • Click on the sub-category âOther Devicesâ
  • Choose the option âUnknown Deviceâ and click on âUpdate Driver Softwareâ
  • This will lead you to a pop-up window that will say âBrowse my Computerâ, select it.
  • Click on the option âLet me pick from a list of device driversâ.
  • You will see a full list of devices. Choose âXbox 360 peripheralsâ
  • Another list will show you all the models, you should select the latest one and click on the âyesâ button to start the installation process.
  • How Do You Pair A Xbox Controller To A Pc

    Bluetooth pairing. Pairing an Xbox One controller with your PC via Bluetooth is almost the same as pairing it with your Xbox One. Turn on the controller by pressing and holding the Guide button, then press and hold the pairing button on the top of the controller. for three seconds until the Guide button flashes. This means it is in pairing mode.

    Read Also: How To Change Your Gamertag On Pc

    Connecting A Wired Xbox 360 Controller

    Connecting a wired Xbox 360 controller is the simplest of the three since they come with a wire that you can plug directly into a USB port. To connect your wired Xbox 360 controller to your PC:

    • Plug your USB-to-micro-USB or USB-to-USB-C cable into your controller.
    • Then, connect the other end of the controller cable to a USB port.

    Your wired Xbox 360 controller should connect, and you should be able to start using it as soon as you plug in one of the ends of the cable to a USB port on your PC.

    How To Connect Your Wireless Xbox 360 Controller To Your Pc

    How to connect XBox controller to PC

    The easiest and most convenient method to set up and link your Xbox 360 wireless controller to your PC is by using a wireless gaming receiver for Windows.

    If you do have an adapter, the process of connecting to your PC becomes hassle-free and takes no more than a few minutes.

    The steps are easy to follow and outlined below:

  • Connect your Microsoft Xbox 360 wireless receiver to your computer.
  • Allow for the installation of the required software to take place.
  • Link your Microsoft Xbox 360 controller to your desktop or PC.
  • Recommended Reading: How To Manually Eject Disc From Xbox One

    The Three Prong Path To Wireless Freedom

    When it comes to wireless Xbox 360 on Windows you have three options: the expensive and easy way, the cheap and somewhat frustrating way, and the grey market middle ground. If youre sitting at your computer desk and not across the living room, for examplethen you might just want to skip the whole hassle, just buy an official wired Xbox 360 controller for $27, and be done with it. A wired controller is pure plug and play with no hasslebut if you absolutely must have wireless play at your PC, youll need to buy a USB-to-wireless adapter.

    Thats right, you cant just connect a wireless Xbox 360 controller to your PC using Bluetooth, or anything like that. Xbox 360 controllers use a propriety 2.4Ghz communication method that need a specific a USB adapter made for the Xbox 360 controllerno substitutes allowed.

    RELATED:How to Use an Xbox 360 Controller On Your Windows PC

    This is where the decision making process gets slightly complicated. Microsoft doesnt sell the adapter by itself. They sell it in a bundle with a wireless controllerbut if you already have a wireless controller, you probably dont want to buy another one just to get the adapter.

    If you want to buy the adapter separately, you can, but youll either be buying a Chinese knockoff product, or an official adapter thats been separated from its kit by a third party. Picking from these potential options is the most important step in the project.

    What Kind Of Controller Do I Need For Xbox Remote Play

    Xbox Wireless Controllers Included with Xbox Series X and Xbox One X, Xbox Elite Series 2 Wireless Controllers, or Xbox Design Lab Controllers The app will guide you through setup on your registered Xbox. This includes testing to make sure your home network, console, and controller are ready to play Xbox remotely.

    You May Like: How To Rgh Xbox 360

    What Is A Xbox 360 Controller Driver

    The Xbox 360 Controller PC Controller is a simple controller that allows you to use your Xbox 360 Controller on your Windows PC. Simple, easy and completely free – just plug in your hardware, install the driver and your driver will automatically recognize your computer. Remark. In Windows 8 and 10, the software is installed automatically when you connect your Xbox 360 controller to your computer.

    Original ps3 controller

    P/s: Connect Controller Using The Proper Ports

    (How to Use &  Connect) Microsoft Xbox Controller for PC ...

    How to connect Xbox 360 wireless controller to pc should not be complicated at all. Just like any other peripherals, you have to follow the correct instructions to ensure that you get the best experience.

    The most important thing to remember is to connect the xbox 360 wireless controller to your computer using the proper ports.

    Recommended Reading: Will Xbox 360 Play Blu Ray

    How To Use An Xbox 360 Controller On Xbox One

    Yoodley is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

    If your Xbox One controller is broken, or if you want to connect two controllers for multiplayer purposes, you have come to the right place. This guide explains how you can connect your wired or wireless Xbox 360 controller to Xbox one and play multiplayer or other split-screen games.

    Figure Out Which Xbox Controller You Own

    To start, the Xbox Wireless Gamepad included with the Xbox Series S/X, and now widely available as the Xbox Wireless Gamepad, is nearly identical to the Xbox One’s controller. They both support Xbox wireless communication and Bluetooth, and the methods for connecting them to your PC are identical. The instructions here apply to both gamepad generations.

    Original Xbox One controllers lack wireless connectivity, but the gamepads that shipped with the Xbox One S and later consoles include Xbox wireless communication and Bluetooth. You can use both controllers wirelessly with your PC, but the process is different you must get a wireless dongle for the non-Bluetooth gamepads. The good news is that Bluetooth controllers have been in production for so long that if you picked yours up in the last four years, there’s a good chance that it already has Bluetooth.

    To determine whether you have a Bluetooth or non-Bluetooth Xbox controller, you need to look at the plastic surrounding the Guide button. If it’s the same plastic as the face of the controller, without any seams, you have a Bluetooth gamepad. If it’s the same plastic as the bumper buttons, with a seam between the Guide button and the controller’s face, it’s a non-Bluetooth gamepad. If it has a small, rectangular Capture button between the Menu and View buttons, and a USB-C port on the top instead of micro USB, it’s an Xbox Series controller and also has Bluetooth.

    You May Like: How To Clean Dust From Xbox One

    What Accessories Do You Need

    Connecting an Xbox 360 controller to a PC depends on the type of controller you have.

    If you use a wired Xbox 360 controller, you probably dont need any additional accessories, and you can plug your controller directly into a USB port on your PC.

    However, if you are using a wireless controller, you may need additional accessories, depending on the controller you have. That is, whether you have a wireless Xbox 360 controller that connects via Wi-Fi or Bluetooth.

    So, if you are using a simple wireless Xbox controller that comes with a receiver, you can connect it to your PC, and you should be ready to go.

    Similarly, if you have a controller that connects via Bluetooth, you must ensure that your PC has Bluetooth functionality built into it.

    Install Wireless Controll Driver

    HOW TO: Connect Xbox 360 Controller to PC : (Wireless/Wired) – Windows 10/8/7/Vista/XP

    The last step in how to connect XBox 360 controller to PC is to install the wireless controller driver. Again, it is usually very easy to install it.

    Simply follow the steps outlined in your manufacturers manual. Theres really nothing difficult about this procedure, and you can see results within minutes.

    You May Like: How To Reset Home Xbox After 5 Times 2018

    Is The Xbox 360 Controller Compatible With Windows 10

    The Xbox controller is not compatible with the Xbox 360. The wired and wireless versions are also compatible with Microsoft PC operating systems such as Windows XP, Windows Vista, Windows 7, Windows 8 and Windows 10. The controllers work wirelessly with AA or rechargeable batteries .

    Does the iphone 11 have wireless charging

    Connect Your Xbox Controller To Pc With Bluetooth

    Pairing the Xbox controller with your PC over Bluetooth is almost the same as pairing it with your Xbox One or Xbox Series. You activate the controller by holding down the Guide button, then hold the Pairing button for three seconds until the Guide button flashes. This means it’s in pairing mode. If you’re connecting the controller to a console, you hold the Pairing button on the system itself. If you’re connecting the controller to a Windows 10 PC, you need to go through some menus. You also need a Bluetooth USB dongle if your PC doesn’t have Bluetooth. Here’s the full step-by-step process:

  • Hold the Guide button to turn on the controller.

  • Hold the Pairing button for three seconds until the Guide button flashes.

  • Right-click the Bluetooth icon in your system tray.

  • You can now use the Xbox Wireless Gamepad with your PC, and play the vast majority of modern games that support controllers. However, you can’t use the headset jack on the gamepad, just like Sony’s DualShock 4 and DualSense controllers. Although you can use a wired gaming headset with a controller and its associated game system, audio isn’t sent through the jack when it’s connected to a PC via Bluetooth.

    Recommended Reading: How To Take A Screenshot Xbox One

    Connecting Xbox 360 Controller To Pc:

    Step 1: Hold up your xbox 360 controller in front of your mouth and plug the cable into your USB port.

    Step 2: Windows 10 automatically will install drivers for Xbox 360 from your system. If you get a message that the drivers are not found, you have to uninstall and reinstall them.

    Step 3: After doing so, open Device Manager by clicking Start > All Programs > Accessories. In the result, open Xbox 360 Drivers. Check the device to see if it is recognized properly. If not, search for the manufacturers website and download updated drivers.

    Step 4: Now, you are ready to connect your xbox one controller to your system. The first step is to insert the wireless adapter into your computer. Follow the prompts. It is important to note that this step is performed to verify if the wireless adapter is working properly. If it is not connected, you should try the following steps. They will help you in determining if you need to replace or repair your wireless adapter.

    Can You Play Pc Games With Xbox 360 Controller

    How To Connect Xbox 360 Controller to PC

    You can play PC video games with an Xbox 360 controller instead of a keyboard and mouse. It offers you a new gaming experience and is developed by Microsoft. Here’s how to download and install an Xbox 360 controller driver, update your driver, or troubleshoot a controller that isn’t working in Windows 10.

    Don’t Miss: How To Set As Home Xbox

    How Do I Turn On My Xbox Controller

    Microsoft provides a set of disposable batteries in the box, but you can grab a play and charge kit for around $20. Press the power button on the front to turn on your Xbox console. Locate and press the pairing button on your console on Xbox Series X and S, its the small round button next to the front USB ports, as shown below.

    More articles

    Popular Articles