How To Connect A Wired Xbox Controller To A Pc
Connecting a wired Xbox controller to a PC is a piece of cake and takes no time at all all you need to do is plug your controller into one of the USB ports on your PCs cabinet to get started.
Regardless of whether you have an Xbox 360 or an Xbox One wired controller to connect to your PC, the steps are identical for both.
Cause : Microphone Is Preventing Connection
Some users have reported that their Xbox One Wireless Controller will not connect with their Xbox console when their headset microphone is plugged in. Unplug your headsets microphone and reconnect the Xbox One Wireless Controller. If the controller does not connect automatically, sync the controller and console, again. Once a connection has been established, plug the microphone back into your headset.
If you are using a Model 1697 controller, your internal headphone jack may be damaged. Try unplugging the microphone and connect the controller, again. If you continue to have problems, try a different pair of headphones that are known to work.
Update Your Controller Software
The problem may occur if the controller software is wrong or out of date. You can update your controller software to see if it can bring back your controller connection. To do so:
1) Connect your controller to the console with a USB cable.
2) Sign into Xbox Live.
3) Press the Menu button on your controller, and then select Settings.
4) Select Devices & accessories.
5) Select the controller you are using.
6) Select Update.
7) Select Continue.
8) Wait for the console to complete the updating process. After that, test your controller and see if the not syncing problem is fixed.
If none of the methods above can help you fix your problem, it is possible that there are hardware issues in your controller. It is recommended that you contact Microsoft support for further assistance to resolve the problem.
You May Like: How To Play Xbox Games On Pc
Turn On The Xbox One Controller
Turn on the Xbox One controller you want to pair. If the Xbox light is flashing, that means it’s ready to sync with a console. If it doesnt turn on, make sure its fully charged or has a fresh set of batteries.
Push the connect button on the Xbox One.
Newer modelsXbox One S and Xbox One Xhave a connect button under the power button on the right side. The original Xbox One connect button is on the left side near the disc slot.
To put the controller in pairing mode, press and hold the connect button located on top of the controller. The Xbox light will stop flashing when the controller is connected.
Once your controller has been connected, it’s time for a test! Load up your favorite game and see if you can play.
Not every Xbox One controller wants to sync properly, here are the most common issues you’ll encounter and what to do.
How To Connect Xbox One Controllers To Pc Using The Xbox Wireless Adapter
Windows 10 is all set and ready to work with the Xbox Wireless Adapter. Drivers will automatically install when the device is connected, so the process is largely simplified
- Step one: Connect the Xbox Wireless Adapter to your Windows PC and allow the drivers to automatically install.
Try to ensure where the adapter is connected to your PC provides line of sight to the controller for the best connectivity.
- Step two: Power up your Xbox One controller by pressing the Xbox logo in the center of the controller.
- Step three: Locate and press the button on the Xbox Wireless Adapter
- Step four: Press the connect button on your Xbox One controller. It can be found on the front of the device near the micro USB port. Its marked by a symbol that looks like this: “(((“
- Step five: Ensure the Xbox logo on your controller is blinking. This indicates it is connecting. When the logo and LED on the USB adapter both go solid, the connection is complete.
- These are the best PC games to play with your newly connected controller
You May Like: Can You Play The Forest On Xbox
Xbox Series X: How To Connect Controller
One of the most exciting parts of getting next-gen consoles is getting your hands-on getting to use their next-gen controllers. Just like previous generations, youll need to go through a few steps to properly pair your controller, especially with an Xbox. Here is everything you need to know about how to connect controllers to the Xbox Series X and Series S.
How To Sync The Xbox 360 Controller To An Xbox 360
Syncing an Xbox 360 controller with an original Xbox 360 is, naturally, the easiest process on this list. Here’s how:
Turn the Xbox 360 on.
Turn the Xbox 360 controller on by pressing and holding the big Guide buttonin the center.
Press the Wireless Connect button on the Xbox 360. It’s located on the front of the console. You should see the light ring around the consoles power button flash and rotate.
On the Xbox 360 E and S consoles, the Wireless Connect button is found by the controller ports. On the original Xbox 360 console, it’s located near the memory card slots.
While the lights are still flashing, press the Sync button on the controller. It’s located on the gamepad’s backside, next to the wired connection. The Guide Button flashes when the syncing completes.
You’ll know the controller is synchronized with the console when the LEDs around the controllers Guide Button stop flashing and one LED stays on. The Xbox console shows a similar light, although the Xbox 360 E shows a single solid light around the power button.
Also Check: How To Find Xbox Series X
How To Pair Your Xbox One Controller Using A Cable
If you’d rather, you can instead use a micro-USB cable to pair your Xbox One controller to your Xbox console. For the Xbox Series X|S controller, you’ll need to use a USB-C cable instead.
Simply plug the cable into a USB port on the Xbox, then connect the other end to your controller. Once they’re connected, press and hold the Xbox button on the controller to sync them. You can disconnect the cable to use the controller wirelessly after the syncing completes.
How To Connect Or Sync An Xbox One Controller
If you’re setting up a new Xbox One or just connecting a new controller, you need to make sure your controller is synced. It’s kind of hard to move forward without this process, so here’s what you need to set things up!
Howchoo is reader-supported. As an Amazon Associate, we may earn a small affiliate commission at no cost to you when you buy through our links.
Recommended Reading: How To Connect Xbox To Mac
How To Connect The Xbox 360 Controller To Pc
If you have a wired Xbox 360 controller, you simply need to plug it into an open USB port on your PC. Windows automatically installs the necessary drivers and notifies you when the controller is ready for use.
If your PC doesn’t detect the Xbox 360 controller, try plugging it into a different USB port, then test it again. If it still doesn’t work, make sure Windows is fully updated. Install any updates and try again.
If you want to connect a wireless Xbox 360 controller to a Windows PC, you need a wireless receiver. Microsoft has an official one, but there are also third-party options that work just as well, though they include a couple of extra hoops to jump through. Here’s how to set one up:
Connect the wireless receiver to a spare USB port on your PC. If youre using the official adaptor, it should automatically launch the driver installation software. Follow the on-screen instructions, then skip to Step 7. If youre using an unofficial adaptor, follow the steps below.
Use the Windows search box to look for Device Manager, then select it from the results.
You should see one item in the list with a small, yellow triangle, suggesting Windows doesnt recognize the device. Right-click it and select Properties > Driver> Update Driver.
Select Browse my computer for driver software.
Select Let me pick from a list of available drivers on my computer.
Scroll down the list and select Xbox 360 Wireless Receiver for Windows. Then select Next.
How To Connect With The Xbox Wireless Adapter For Windows
This process is nearly as simple as connecting with a USB cable, and is basically identical to connecting the controller to an Xbox console.
1. Plug the Xbox Wireless adapter into a USB port.
2. Turn on your Xbox One controller by holding the Guide button in the center. Now press the the small sync button on the top of the controller until the Guide button begins flashing.
3. Press the small sync button located on the side of the Xbox Wireless adapter for a couple seconds. Watch the flashing Guide button on the controller. When it goes solid, you’re connected!
Recommended Reading: Does Xbox One X Have Bluetooth
Way : Connect Your Xbox One Controller Using A Usb Cable
This method is applicable for wired and wireless Xbox One controller.
Step 1: If you own a wired Xbox controller, then you can skip this step. If your Xbox one controller is wireless then Plug the one end of the USB cable into the top front of your controller.
Step 2: After the initial step, plug the other end of the USB cable into the USB slot of your windows PC.
After following the above steps, now your Windows will automatically install all the Xbox one controller driver, in case if it fails to do so, then you can carry forward with the ways of troubleshooting to update the Xbox One controller drivers.
How To Sync An Xbox One Controller To An Xbox Series X Or S
Both the Xbox Series X and S recognize and work flawlessly with both original Xbox One controllers and the update that first shipped with the Xbox One S.
Heres how to sync an Xbox One controller with your Xbox Series X or S for wireless play:
Press the Sync button on your Xbox Series X or S.
Press the Xbox button on your Xbox One controller until it lights up.
Press the Sync button on your Xbox One controller until the illuminated Xbox button starts flashing rapidly.
Wait for the Xbox button to stop flashing and remain steadily lit.
Your controller is now synced and ready to use.
Don’t Miss: How To Pair Xbox 360 Controller
Still Cant Connect Check For Xbox Controller Firmware Updates
Resync Xbox Controller Using A Usb
If the wireless buttons didn’t work, alternatively, you can force pairing using a USB cable instead.
You May Like: How Long Do Games Stay On Xbox Game Pass
How To Connect Your Xbox Series X/s Controller To Xbox One
The process is exactly the same as above. Simply press the Pair button on your Xbox One console and controller until both lights start flashing. Once a connection has been established, the controller’s Xbox button will remain lit.
You can find the Pair button on the front right of the Xbox One X, below the power button, and the same is true on the Xbox One S. On the Xbox One, however, the Pair button is located around the corner of the disc tray.
How To Update Your Xbox Controllers Firmware
To update your controller, its best to use it with a USB cable. So, herere the steps:
Also Check: How To Lower Ping In Fortnite Xbox
Way : Connect Your Xbox One Controller Using A Wireless Adapter
Beside USB Cable, the other way to connect your Xbox One controller with PC is through the Xbox wireless adapter.
Step 1: Microsoft has a new standard called Xbox Wireless adapter to connect an Xbox wireless controller. There are very few chances that this functionality is inbuilt into your PC, if not? then you have to first buy Xbox wireless adapters.
Step 2: After you buy Xbox wireless adapter, then plug it into your PC and press the button present on the edge of the device to activate it, and this process correspondingly downloads all the necessary drivers to connect your Xbox One controller automatically.
Step 3: Make sure your Xbox Controller is all powered up with batteries and Press the Xbox button to turn on your controller.
Step 4: The full and final step, press the controller blind button and you will see the LED light on the Xbox Controller and adapter blinks for a few seconds and then goes solid. Hurray! Your Xbox One controller is finally attached to your Windows PC.
Check The Status Of Your Controller
You should check the basic status of your controller and see if there is any issue that causes the problem.
1) Check the connection status of your controller: Make sure your wireless controller is close enough to the console. Ensure that there is no objects or USB or wireless devices that may interfere in the connection.
2) Check the battery status of your controller: Make sure the batteries are not running out of power. If your controller is running low on power, charge or replace the batteries and see if this resolves the problem.
You May Like: Is The Xbox Elite Controller 2 Worth It
This Is How To Wirelessly Connect Your Xbox One Controller To The Xbox One Console:
Step 1:Turn on your Xbox One console.
Step 2: Make sure your controller has either AA or rechargeable batteries.
Step 3:Press and hold the Xbox button to turn on your controller. Once the button flashes and stays lit, your Xbox controller has successfully turned on.
Step 4: Press the Pair button on your Xbox console.
Step 5:Press and hold the controllers Pair button. The Xbox button on your controller will flash a few times, signifying that its searching for a console. Once it pairs with your console it will stay lit.
Controller Support In Android Isn’t New
Technically, you can connect any wired controller if your Android device’s USB port supports On-The-Go . Phones and tablets use USB Micro-B and USB-C ports for charging and sending data to and from a connected PC, but OTG adds support for USB-based devices like mice, keyboards, flash drives, and so on.
Not all devices have OTG connectivity, and theres no good way to find out if your device supports OTG without digging through its product pagewhich typically lists generic informationor installing a questionable app. You also need an adapter connecting the wired controllers USB-A male connector to the Android devices female Micro-B or USB-C port.
That said, wireless is the way to go. Bluetooth is the norm for all controllers connecting to Android, including the Xbox One controller. Microsoft’s peripheral uses proprietary Wi-Fi technology when it’s connected to the Xbox One and certain PCs, but it switches to Bluetooth for all other devices.
You May Like: How To File Share On Xbox One
How To Connect Xbox One Controller And Xbox Series Controller
You can connect Xbox One Controller and Xbox Series controller to a PC, an Xbox One, or an Xbox Series. The process is easy to learn and works mostly through the Pair button. On Windows, it works through the Bluetooth menu.
Our tutorial covers Xbox wireless controllers. They are convenient, but they can be confusing. However, they are backward and forward compatible.
Yet, if youre having trouble using wireless Xbox One controllers with the console, were sharing various tips to easily solve the issue.
Can’t Connect Your Xbox One Controller
The above steps should sync your Xbox controller and console in most cases. But if pairing doesn’t work, try these troubleshooting tips:
- Try replacing the batteries in the controller. If you use the Xbox One Play and Charge Kit or Xbox Rechargeable Battery attachment, make sure your controller is charged. Confirm that the cable you’re using to connect and charge the controller works properly.
- Keep the controller close to the console when you sync it. The wireless connection between your console and controller has a range of about 20-30 feet, so it may disconnect if you go further.
- Turn off any other wireless devices that are close to the Xbox and controller to reduce interference.
- Fully restart your console by holding the Xbox button on the front of the system for about 10 seconds. Disconnect the console’s power cable for at least 30 seconds, then reconnect it and turn on your system again.
- Remember that you can only have eight controllers connected to the system at once. If you somehow have this many connected, disconnect a few before connecting another.
- The Xbox Series X|S controller has a handy feature that lets you switch between using your controller with your Xbox and a connected Bluetooth device. Quickly press the Pair button on your controller twice to switch from a Bluetooth connection back to your Xbox. Hold Pair to put your controller back in pairing mode so you can reconnect it to the Bluetooth device.
You May Like: How To Change Profile Pic On Xbox App