Monday, March 27, 2023

How Do You Reset An Xbox One

Don't Miss

How To Soft/hard Reset Your Xbox 360

How to Factory Reset Xbox One & Make it run Faster! (Keep All Apps & Games)

Unlike the Xbox One, the Xbox 360 doesn’t have a dedicated “sleep mode.” Thus, when you want to soft reset your Xbox 360, you can do so in basically the same way as an Xbox One without worrying about whether it has fully shut down.

To restart your Xbox 360, press and hold the Xbox button on your controller for a few seconds. In the menu that appears, choose Turn off console and give it a moment to shut down. If you want to make sure it fully shuts down, remove the power cable for a minute before turning the system back on.

In case your Xbox 360 is frozen, you can hold the power button on the console for several seconds to perform a hard shutdown. Like the Xbox One, pulling the plug is also an option, but only as a last resort.

How To Restore Xbox One To Factory Settings

  • The first step in resetting an Xbox One is to open the main menu. This can be accomplished in one of two ways:

  • Press the home button on your Xbox One controller. This is the illuminated button with a stylized X that is centrally located on the front of the controller near the top.
  • Alternately, you can press the left bumper until you reach the home tab, and then press left on the d-pad.
  • Press down on the d-pad until you reach the gear icon.

  • Press the A button to select the gear icon.

  • With all settings highlighted, press the A button again to open the settings menu.

  • Press down on the d-pad until you reach System.

  • Press the A button to open the System submenu.

  • With console info highlighted, press the A button again.

  • Press down on the d-pad to select reset console.

  • Press the A button to select this option and move to the final step.

  • Press left on the d-pad to select the reset option that you want.

  • If you want to leave game and app data in place, then highlight Reset and keep my games & apps. Then press the A button. This is the less thorough of the two options, as it only resets the Xbox One firmware and settings without touching your games and apps. Try this first, as it allows you to avoid downloading everything all over again.

    There is no confirmation screen or prompt. When you press the A button with a reset option highlighted, the system will be reset immediately.

  • How To Factory Reset An Xbox Through Usb

    If your Xbox has more serious issues and you cant get it to load, you can perform a reset by loading a specific file onto a USB drive and plugging it into the console. You will need a couple of things to get started:

    • A Windows PC
    • A USB drive with at least 4 GB of storage, formatted to NTFS.

    If you arent sure how to format your USB drive, dont worry we have an entire guide available.

    After youve formatted the drive, navigate to . This link downloads the necessary file to your system as a ZIP folder.

    Unzip the folder. Inside you will find a file named $SystemUpdate. Copy that file onto the root directory of your flash drive, and then remove the drive from your PC.

    Note that there should be no other files on the drive it should be empty except for $SystemUpdate.

    The next step involves your Xbox itself.

  • If youre using a wired connection, unplug the Ethernet cable from the back of the console.
  • Power down the Xbox and remove the power cable.
  • After 30 seconds, reconnect the power cable.
  • Connect the USB drive containing the $SystemUpdate file to the Xbox.
  • Press and hold the Pair and Eject buttons.
  • Note: If you have an all-digital console that does not have an eject button, you only need to hold the Pair button.

  • Press the Xbox button on the front of the console and continue holding the Pair and Eject buttons for 10 to 15 seconds.
  • After the console restarts, remove the USB drive.
  • About Startup Tones

    Don’t Miss: Xbox Elite Controller Teardown

    How To Hard Reset Xbox One With Xbox Startup Troubleshooter

    For many problems your Xbox One console faces, the ways to reach the solution must be different as well. Cases where you arent able to login to the Xbox platform, we would need to factory reset Xbox One with the Xbox Startup Troubleshooter. Its more like taking help from the outer feature because you arent able to boot the console from within.

    1. The prerequisite you need to factory reset Xbox One would be to power off your console and plug out network & power cables . Now you need to plug in the power cable and use below steps:

    2. On your console, you can see the Eject & Bind buttons .

    3. Since you are holding both the buttons on the console, put your fingers at work and hold down the Xbox button also.

    4. Now you can release the pressure from the Xbox button, however keep the pressure on both the Eject & Bind buttons unless you hear two tones altogether.

    5. Following this command, the Xbox Startup Troubleshooter will appear on your screen where you need to navigate yourself to the Settings section.

    6. Under Settings, look for the Reset This Xbox feature and go ahead with the resetting your Xbox to factory settings. Simple as that!!

    Running The Reset On Your Xbox One

    Reset Xbox One Console to Factory Defaults

    If you have a network cable plugged into your Xbox One, remove it. Next, fully shut down your console by holding the Xbox button on the system face, as described above. Once it’s powered off, unplug the power cord and wait 30 seconds before plugging it back in.

    Continuing on, plug the USB drive into the console. Now, you need to tell the Xbox One to check for the USB drive when it boots up. To do this, hold both the Bind and Eject buttons on the console, then press the Xbox button on the front of the console.

    On the original model Xbox One, the Bind button is on the left side of the console. If you have an Xbox One S or Xbox One X, the Bind button is underneath the Xbox button. The Xbox One S All-Digital Edition does not have an Eject button, so if you have that system, hold only the Bind button.

    Don’t Miss: How To Take Off Parental Controls On Xbox

    Why Won’t My Xbox Connect To Xbox Live

    If your Xbox 360 console is unable to connect to Xbox Live, the first step is to run the network connection test on your console. Select Settings > System Settings, and then Network Settings. Select the name of your Wireless Network, or select Wired Network for a wired connection. Select Test Xbox Live Connection. via

    How To Fix Xbox One Update Errors

    An Xbox One system update error can manifest in several ways, but the following solutions will resolve nearly every updating problem. Most of them require very little effort.

    Here are some common methods to use to fix Xbox One update errors:

    Restart your Xbox One. Sometimes your Xbox One just needs a helpful little push to finish updating itself. This option can resolve problems like error messages, codes, and getting stuck on the loading screen.

    Press and hold the Xbox button in the middle of your controller to open a menu, and then select Restart console.

    Power-cycle the Xbox One from the Something Went Wrong screen. If your screen is showing the Something Went Wrong message, select Restart this Xbox. Wait for the console to restart, and see if the update is able to finish. If the update still doesnt proceed, shut down your Xbox and unplug it for at least 30 seconds. Plug it back in, turn it on, and see if the update finishes.

    If you arent able to get the Something went wrong screen, power cycle your Xbox by holding the power button down for at least 10 seconds. After the Xbox turns off, press the power button again to turn it on.

    Reset your Xbox One. Performing a soft reset is an easy fix that can help your Xbox One complete the update process if you have an error code, error message, or the loading screen is stuck. Resetting is different from restarting, but its less drastic than a full factory reset.

  • Turn off your Xbox One, and disconnect it from power.
  • Read Also: Xbox Hotel Wifi

    Performing A Soft And A Hard Reset

    A soft reset simply refers to powering your Xbox off and turning it back on after a few seconds. You can do this with your controller by holding down the Xbox button and choosing Restart console or Turn console off. You can also press the power button on the console to do the same thing.

    A hard reset, on the other hand, refers to completely powering down your Xbox. Instead of pressing and releasing the Xbox button on the console, hold it down for around 10 seconds, and release it only when the Xbox shuts down completely. Then disconnect the power cable, wait for an additional 10 seconds, and then reconnect the console and turn it on.

    Is It Bad To Hard Reset Your Xbox One

    How to RESET XBOX ONE PASSSWORD on your Xbox One (Easy Method)

    You are fine if you did a hard reset. This won’t damage the console at all. I actually do this everyday as it keeps my console running smoother as it clears the cache from viewing screenshots and clips in the Community Feed or on profiles. Doing a hard reset on its own will not damage your console. via

    Don’t Miss: Xbox 360 Controller Flashing

    Performing An Offline System Update By Usb

    If youre experiencing issues and want to perform a factory reset to solve them, you may not need to go that far. You can perform an offline system update via USB, which can roll back any failed updates or other issues keeping your Xbox One from working properly. If you have an Xbox One S, Xbox One S Digital, or Xbox One X, performing an offline system update is fairly straightforward. The original Xbox One requires a few more steps.

    Ways To Reset An Xbox One

    Most Xbox One users dont encounter problems with their console but for those who may have to deal with some problems, knowing how to reset their device might find it handy. There are three types of reset that you can perform on an Xbox One. Each of them may be necessary to fix a certain problem. This brief article will show you whats the difference between each of these resets.

    Recommended Reading: How To Take Off Parental Controls On Xbox

    Is Hard Resetting Bad For Xbox One

    You are fine if you did a hard reset. This won’t damage the console at all. I actually do this everyday as it keeps my console running smoother as it clears the cache from viewing screenshots and clips in the Community Feed or on profiles. Doing a hard reset on its own will not damage your console. via

    Begin The Reset Process On Your Xbox Console

    Reset Xbox One to Factory Defaults

    With your Xbox powered off, plug the flash drive into a USB port on the console. Press and hold the BIND button and the EJECT button . While holding these two buttons down, press the Xbox button on the console. Continue to hold down the BIND and EJECT buttons for an additional 10 to 15 seconds.

    Note: The BIND button is also known as the pairing button. It is the same button one would press to pair a new controller to the console. If youre not sure where that button is located, refer to the diagram below. Also, when it comes to Xbox Series X/S consoles, this button is found on their front side.

    At this point you should hear two power-up tones a few seconds apart. Release the BIND and EJECT buttons after the second tone. Also, feel free to remove the USB stick when the console restarts and powers on again.

    Once your Xbox One X/S or Xbox Series X/S restarts, you should see your consoles Digital Setup Experience guide on your TV screen. This will indicate that your Xbox has returned to its factory settings.

    Note: If you dont hear anything after 15 seconds, that means the process has failed. Also, if you hear any power-down tones, that also means youve entered the process incorrectly. Therefore, youll want to try the sequence again.

    You May Like: How To Set An Xbox As Your Home Xbox

    Perform A Factory Reset From The Dashboard

    step 1: Sign inPress Xbox Click the button to display the guide overlay.

    Step 2: Go to system Select the menu and Setting.

    Step 3: select system,afterwards Console information..

    Step 4: select Reset console..

    At this point, you have one of the following options: Reset and delete everything Or Reset and keep games and apps .

    Even if you keep your games and apps, all your personal data will be erased from your system, so sync with Xbox Live or manually export in advance if you dont want to lose your settings. If you choose to reset, the console will continue to erase the content. This may take a few minutes.

    Prepare Your Xbox For A Factory Reset

    If soft and hard resets dont cut it for you, you can finally move on to performing a factory reset. But before that, its important to make sure you have all your data backed up, either on the cloud or on an external storage drive.

    A factory reset removes not only all your games and progress data but also your personal settings and accounts. Your Xbox backs up all your data on the cloud but only if its connected to Xbox Live. In case youve not been online for a while, its best to sync your console with Xbox Live before moving to a factory reset.

    You can also choose to back up your games on an external drive by following the steps below:

  • Head over to the System tab in the Settings app
  • Select Storage > internal drive
  • Select Transfer and choose the items you want to transfer
  • Choose Copy selected or Move selected
  • Select the target drive and choose Copy or Move
  • Now that youve backed up all of your important data, you can move to the next section to begin the factory reset process.

    Also Check: How To Take Off Parental Controls On Xbox

    Factory Reset Xbox One With Offline System Update

    On conditions where you arent able to factory reset Xbox One with the Xbox Startup Troubleshooter, you can go with the offline system update. One of the ways where you might not see the Startup Troubleshooter on your screen & think if you missed one or the other step to hard reset Xbox One.

    So in those cases where you cant see the Xbox Startup Troubleshooter on the screen, go with the below steps:

    1. When you dont see the Troubleshooter on the screen, go ahead with powering on your Xbox One console & push the Xbox button from the controller.

    2. Here, you need to follow the below path that will navigate you to the Console Info section onto the screen:

    Profile & System > Settings > System > Console Info

    3. Once you reach the above path, you need to look for the OS version the Xbox is running on, currently. If the OS version is among the below listed versions, start the factory reset process from step E or else check out step D:

    6.2.11791.0 fre

    10.0.10586.1194 fre

    5. Or in situations where the above mentioned Xbox OS versions come under your current Xbox version, you only need to download the osu1, follow the process of extracting the downloaded file & put $SystemUpdate file onto the USB drive.

    6. After you have established that under which category your Xbox OS version comes in , the further steps will be the same. So start the process by powering down your console & connecting the USB drive to the console.

    Wrapping Up

    Recommended Readings:

    Resetting Xbox One Soft Reset

    How to Factory Reset an Xbox One

    Try to soft reset the Xbox One console if in case of glitches or you want to attain better performance. You shall further proceed with the following methods when this doesnt work or you want to factory default the console.

    1. Press and hold the Xbox button on the center of the controller to turn off the console.

    2. Choose Restart console or Turn Console off to soft reset Xbox One.

    Read Also: Injustice 2 Frame Data

    How Reboot Xbox One

    To reboot your Xbox One, follow these simple steps:

  • Press the guide button on your controller.
  • Navigate to the system menu by pressing the right bumper three times.
  • Select restart console.
  • Select restart at the next window.
  • Presto, the console will reboot without the need to shut down and power back up.

    If youre in the settings, the same option can be found under the Power & startup menu, which is useful if youre doing something in there, such as tinkering with network settings, and want to give it a quick reboot.

    Reset Using Usb Flash Drive Factory Reset

    Resetting Xbox One with a USB drive requires your computer. This method can be chosen if you are unable to access the Settings menu with the absence of a picture on the screen. In this method, all the data including games, settings, accounts, etc., that were available on the console will be permanently deleted.

    Initial Requirements:

    • A USB flash drive with 4 GB of minimum space and formatted as NTFS
    • Windows PC with USB port and internet connection

    On PC

    1. Insert the USB flash drive on the USB port of your PC.

    2. Open a browser and that is needed to reset Xbox One.

    3. Right-click on the zip file to unzip it and select Extract all on the pop-up.

    4. Now, copy $SystemUpdate file from the .zip file into your USB drive.

    5. Eject the USB drive from the Windows PC.

    On Xbox One Console

    1. Plug out the Ethernet cable is you are using a wired network connection.

    2. Turn off the console and disconnect the power cord to turn it off completely.

    3. Plug in the power cord back after 30 seconds or more.

    4. Connect the flash drive into the USB port of the Xbox One console.

    5. Now, press and hold the Pair and the EJECT button .

    6. Following which you should press Xbox button on the console.

    • On Xbox One S All Digital Edition, you shall just hold the Pair button and then press the Xbox button.

    7. Wait for 10-15 minutes while still holding the Pair and Eject button.

    8. Release the fingers from the buttons once after you hear two power-up tones.

    You May Like: How To Set As Home Xbox

    More articles

    Popular Articles